otu2TxSapi
CORIANT-GROOVE-MIB ·
.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.10
Object
column
CoriantTypesTtiType15
The transmitter sapi(Source Access Point Identifier)
Context
- MIB
- CORIANT-GROOVE-MIB
- OID
.1.3.6.1.4.1.42229.1.2.4.1.11.1.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- otu2Entry
- Table
- otu2Table
- Siblings
- 26
Syntax
CoriantTypesTtiType15
- Source
- CoriantTypesTtiType15
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..15
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| otu2FecType The FEC type of client OTUk.
Conditions:(ancestor::port/port-type = 'client') or (ancestor::port/port-type = 'client-subport')
default value :G709 | column | CoriantTypesOtukFec | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.1 |
| otu2TxDapi The transmitter dapi(Destination Access Point Identifier) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.11 |
| otu2TxOperator The transmitter operator TTI | column | CoriantTypesTtiType32 | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.12 |
| otu2TimDefectMode The tim defect selection mode
default value :NONE | column | CoriantTypesTimMode | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.13 |
| otu2TimAct The enable switching of inserting AIS by tim function
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.14 |
| otu2RxSapi The received sapi(Source Access Point Identifier) | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.15 |
| otu2RxDapi The received dapi(Destination Access Point Identifier) | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.16 |
| otu2RxOperator The received operator TTI | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.17 |
| otu2DegradeInterval The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection.
… | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.18 |
| otu2DegradeThreshold The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
default value :12304 | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.19 |
| otu2AdminStatus The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independent… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.2 |
| otu2LoopbackEnable The enable switching of loopback function.
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.20 |
| otu2LoopbackType The type mode of loopback function
default value :none | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.21 |
| otu2ManagedBy Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
de… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.22 |
| otu2ClientShutdown The switching of client-shutdown.
default value :no | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.24 |
| otu2ClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0 | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.25 |
| otu2HoldoffSignal Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value… | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.26 |
| otu2NearEndAls The switching of near end ALS.
default value :no | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.27 |
| otu2AlsDegradeMode The switching of defect BERSD-ODU trig ALS
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.28 |
| otu2OperStatus The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operation… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.3 |
| otu2AvailStatus Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' '… | column | Bits | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.4 |
| otu2AliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.5 |
| otu2ServiceLabel Path/service name of cross-connection related facility.
default value : | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.6 |
| otu2ExpSapi The expected sapi(Source Access Point Identifier) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.7 |
| otu2ExpDapi The expected dapi(Destination Access Point Identifier) | column | CoriantTypesTtiType15 | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.8 |
| otu2ExpOperator The expected operator TTI | column | CoriantTypesTtiType32 | .1.3.6.1.4.1.42229.1.2.4.1.11.1.1.9 |