opsEntry
CORIANT-GROOVE-MIB ·
.1.3.6.1.4.1.42229.1.2.3.20.1.1
Object
row
Entry of opsTable
Context
- MIB
- CORIANT-GROOVE-MIB
- OID
.1.3.6.1.4.1.42229.1.2.3.20.1.1- Type
- row
- Status
- current
- Parent
- opsTable
- Table
- opsTable
- Children
- 21
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| opsName The name assigned to identify a specific ops in the device | column | CoriantTypesNameIdentifier | .1.3.6.1.4.1.42229.1.2.3.20.1.1.1 |
| opsRevertive Revertive behavior of the aps.
If True, then automatically revert after protection switch
once the fault is restored.
default value :no | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.3.20.1.1.10 |
| opsWaitToRestore Wait To Restore, valid values: 0-3600 seconds. A value of zero will switch back immediately,
after expiration of the timer, the working is restored and a norequest state is transm… | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.3.20.1.1.11 |
| opsWorkingSwitchThreshold The switching threshold of the working port which indicates the optical power threshold of signal degrade.
default value :-18.0 | column | CoriantTypesOpticalPower | .1.3.6.1.4.1.42229.1.2.3.20.1.1.12 |
| opsProtectionSwitchThreshold The switching threshold of the protection port which indicates the optical power threshold of signal degrade.
default value :-18.0 | column | CoriantTypesOpticalPower | .1.3.6.1.4.1.42229.1.2.3.20.1.1.13 |
| opsWorkingLosThreshold The switching threshold of the working port, power level below it will lead to loss of signal.
default value :-23.0 | column | CoriantTypesOpticalPower | .1.3.6.1.4.1.42229.1.2.3.20.1.1.14 |
| opsProtectionLosThreshold The switching threshold of the protection port, power level below it will lead to loss of signal.
default value :-23.0 | column | CoriantTypesOpticalPower | .1.3.6.1.4.1.42229.1.2.3.20.1.1.15 |
| opsHoldoffTimer The hold off time of the protection switch.
UNITS:milliseconds
default value :0 | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.3.20.1.1.16 |
| opsWavelengthBand Specifies the band of the signal going through the optical protection switch unit.
UNITS:nm
default value :1550 | column | Enumeration | .1.3.6.1.4.1.42229.1.2.3.20.1.1.17 |
| opsFrequency The frequency of optical protection frequency, which will decide the pilot tone modulated on the channel.
UNITS:MHz
default value :0 | column | CoriantTypesFreq | .1.3.6.1.4.1.42229.1.2.3.20.1.1.18 |
| opsWorkingProtectionRelativeThreshold Specify the threshold of power difference between working path and protection path;
Setting to value 0 to disable the power difference as switch criteria;
Setting to non-zero val… | column | CoriantTypesOpticalDB | .1.3.6.1.4.1.42229.1.2.3.20.1.1.19 |
| opsWorkingEntity Identifier of the working port of the OPS. | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.42229.1.2.3.20.1.1.2 |
| opsRelativeThresholdHysteresis Specify relative threshold hysteresis for clearance of relative threshold crossing failure.
default value :2.0 | column | CoriantTypesOpticalDB | .1.3.6.1.4.1.42229.1.2.3.20.1.1.20 |
| opsRelativeThresholdOffset Specify relative threshold offset for protection switch per power difference between working and protection,
the offset is the value of (working power - protection power), the of… | column | CoriantTypesOpticalDB | .1.3.6.1.4.1.42229.1.2.3.20.1.1.21 |
| opsProtectionEntity Identifier of the protection port of the OPS | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.42229.1.2.3.20.1.1.3 |
| opsAdminStatus The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independent… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.3.20.1.1.4 |
| opsOperStatus The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operation… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.3.20.1.1.5 |
| opsAvailStatus Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' '… | column | Bits | .1.3.6.1.4.1.42229.1.2.3.20.1.1.6 |
| opsAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore | column | OctetString | .1.3.6.1.4.1.42229.1.2.3.20.1.1.7 |
| opsProtectionStatus Indicates the status of the protection switch. | column | Enumeration | .1.3.6.1.4.1.42229.1.2.3.20.1.1.8 |
| opsActivePath Indicating the active port of the protection switch.
default value :unknown | column | Enumeration | .1.3.6.1.4.1.42229.1.2.3.20.1.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| shelfId Identifier of the shelf.
It shall be an integer number and assigned implicitly by the system or setting through coder on the shelf. | column | CoriantTypesShelfId | .1.3.6.1.4.1.42229.1.2.3.1.1.1.1 |
| slotId Identifier of the slot. It shall be an integer number and assigned implicitly by the system. | column | CoriantTypesSlotId | .1.3.6.1.4.1.42229.1.2.3.2.1.1.1 |
| subslotId Identifier of the subslot. | column | CoriantTypesSlotId | .1.3.6.1.4.1.42229.1.2.3.4.1.1.1 |
| opsName The name assigned to identify a specific ops in the device | column | CoriantTypesNameIdentifier | .1.3.6.1.4.1.42229.1.2.3.20.1.1.1 |