oduRxDapi

CORIANT-GROOVE-MIB · .1.3.6.1.4.1.42229.1.2.4.1.5.1.1.30
MIB view Table view

Object

column OctetString 
The received dapi(Destination Access Point Identifier)

Context

MIB
CORIANT-GROOVE-MIB
OID
.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.30
Type
column
Access
readonly
Status
current
Parent
oduEntry
Table
oduTable
Siblings
38

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-15

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
odutypeL1
Level 1 ODU type
columnCoriantTypesOduType.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.1
oduOperStatus
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operation…
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.10
oduAvailStatus
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' '…
columnBits.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.11
oduAliasName
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
columnOctetString.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.12
oduServiceLabel
Path/service name of cross-connection related facility. default value :
columnOctetString.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.13
oduTribSlot
Tributary slots of ODU, range 1 to 80
columnCoriantTypesNumberList.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.14
oduRxPayloadType
Received payload-type of ODU
columnOctetString.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.15
oduTxPayloadType
Transmitter payload-type of ODU
columnOctetString.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.16
oduNimEnable
The enable switching of nim function default value :enabled
columnCoriantTypesEnableSwitch.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.17
oduDelayMeasurementEnable
The enable switching of delay-measurement function default value :disabled
columnCoriantTypesEnableSwitch.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.18
oduOpuConfigActual
The actual opu configuration type default value :not-applicable
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.19
oduidL1
Identifier of level 1 ODU
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.2
oduClientSignalType
The ODUflex rate for special signal type default value :not-applicable
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.20
oduExpSapi
The expected sapi(Source Access Point Identifier)
columnCoriantTypesTtiType15.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.21
oduExpDapi
The expected dapi(Destination Access Point Identifier)
columnCoriantTypesTtiType15.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.22
oduExpOperator
The expected operator TTI
columnCoriantTypesTtiType32.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.23
oduTxSapi
The transmitter sapi(Source Access Point Identifier)
columnCoriantTypesTtiType15.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.24
oduTxDapi
The transmitter dapi(Destination Access Point Identifier)
columnCoriantTypesTtiType15.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.25
oduTxOperator
The transmitter operator TTI
columnCoriantTypesTtiType32.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.26
oduTimDefectMode
The tim defect selection mode default value :NONE
columnCoriantTypesTimMode.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.27
oduTimAct
The enable switching of inserting AIS by tim function default value :disabled
columnCoriantTypesEnableSwitch.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.28
oduRxSapi
The received sapi(Source Access Point Identifier)
columnOctetString.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.29
odutypeL2
Level 2 ODU type
columnCoriantTypesOduType.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.3
oduRxOperator
The received operator TTI
columnOctetString.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.31
oduDegradeInterval
The consecutive number of 1s intervals with the number of detected block errors exceeding the block error threshold for each of those seconds for the purposes of SDBER detection. …
columnUnsigned32.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.32
oduDegradeThreshold
The threshold number of block errors at which a 1s interval will be considered degraded for the purposes of SDBER detection.
columnUnsigned32.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.33
oduTestSignalType
The type mode of test signal. default value :NONE
columnCoriantTypesTestSignalType.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.34
oduTestSignalEnable
The enable switching of test signal function default value :NONE
columnCoriantTypesTestSignalConfig.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.35
oduTerminationMode
Termination mode for ODU. It works for trace label, nim , Delay Measurement and test signal function validation default value :terminated
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.36
oduType
Describes the type of odu
columnCoriantTypesOduType.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.37
oduManagedBy
Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. de…
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.38
oduidL2
Identifier of level 2 ODU
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.4
oduMsimConfig
Specifies msim alarm reporting or not when msi value received not followed G.709 definition Conditions:../odu-type = 'ODU4' default value :enabled
columnCoriantTypesEnableSwitch.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.40
odutypeL3
Level 3 ODU type
columnCoriantTypesOduType.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.5
oduidL3
Identifier of level 3 ODU
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.6
odutypeL4
Level 4 ODU type
columnCoriantTypesOduType.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.7
oduidL4
Identifier of level 4 ODU
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.8
oduAdminStatus
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independent…
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.5.1.1.9