ochOsPropagateShutdown

CORIANT-GROOVE-MIB · .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.29
MIB view Table view

Object

column CoriantTypesYesNo 
When the attribute value is set to yes, the transmit laser will
be shutdown if the whole service of the direction has signal failure,
the function mainly used in regeneration node to propagate signal failure as LOS.
              	
              	
	default value :no

Context

MIB
CORIANT-GROOVE-MIB
OID
.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.29
Type
column
Access
readonly
Status
current
Parent
ochOsEntry
Table
ochOsTable
Siblings
36

Syntax

CoriantTypesYesNo
Source
CoriantTypesYesNo
Base type
Enumeration

Values & Constraints

Type Values
1yes
2no

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ochOsModulationFormat
Currently och-os modulation format
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.1
ochOsFecType
The FEC type of och-os default value :SDFEC25
columnCoriantTypesOtukFec.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.10
ochOsRxAttenuation
This is to support configurable optical attenuation at receiver side which is based on the hardware capability on the port. default…
columnCoriantTypesOpticalDB.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.11
ochOsTxFilterRollOff
Transmitter filter roll off factor. default value :0.2
columnOctetString.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.12
ochOsPreemphasis
Preemphasis of transmitted signal. default value :enabled
columnCoriantTypesEnableSwitch.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.13
ochOsPreemphasisValue
Preemphasis of transmitted signal. default value :1.0
columnOctetString.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.14
ochOsAdminStatus
The administrative state specifies the permission to use or prohibition against using the resource. The administrative state can be modified by the user, and operates independent…
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.15
ochOsOperStatus
The operational state specifies whether or not a resource is able to provide service. The operational state shall be visible to the operator. The user cannot modify the operation…
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.16
ochOsAvailStatus
Provided to qualify the operational, usage and/or administrative status attributes. The value shall be a bits, management interface shall show the string with space separator ' '…
columnBits.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.17
ochOsAliasName
User defined alias for this entity. Must be an alphanumeric string with dash or underscore
columnOctetString.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.18
ochOsLoopbackEnable
The enable switching of loopback function. default value :disabled
columnCoriantTypesEnableSwitch.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.19
ochOsLineEncoding
Currently line-encoding mode default value :non-differential
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.2
ochOsLoopbackType
The type mode of loopback function default value :none
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.20
ochOsServiceLabel
Path/service name of cross-connection related facility. default value :
columnOctetString.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.21
ochOsDGD
Value of Differential Group Delay UNITS:ps
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.22
ochOsCD
Value of Chromatic Dispersion UNITS:ps/nm
columnInteger32.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.23
ochOsOSNR
Current value of OSNR. The result could be OSNR value with dB
columnCoriantTypesOpticalDB.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.24
ochOsQFactor
Current value of Q-factor
columnCoriantTypesOpticalDB.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.25
ochOsPreFecBer
Current value of PreFEC Bit Error Ratio. default value :-99.0
columnOctetString.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.26
ochOsCdRangeLow
low value of chromatic dispersion search range. UNITS:ps/nm default value :-45000
columnInteger32.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.27
ochOsCdRangeHigh
high value of chromatic dispersion search range. UNITS:ps/nm default value :45000
columnInteger32.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.28
ochOsFrequency
The laser frequency. For tx-lo-independent laser-type, it set the tx laser frequency only. UNITS:MHz default value :0
columnCoriantTypesFreq.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.3
ochOsFastSopMode
Specify if enable fast SOP (state of polarization) change tracking; if enabled, the interface will tolerate very fast SOP and transient. default …
columnCoriantTypesEnableSwitch.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.31
ochOsRateClass
Carried OTN signal basic rate class
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.32
ochOsManagedBy
Describes whether this CRS was system created or not. A system created CRS implies a HW cross connection, that is not manageable by the user. de…
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.33
ochOsBICHM
The BICHM (bit interleaved coded hybrid modulation) incremental step in 1/128 bits/symbol added to base modulation bits/symbol for the hybrid modes modulation-format. 0: Base mod…
columnInteger32.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.34
ochOsCdCompensationMode
chromatic dispersion compensation value source mode default value :auto
columnEnumeration.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.35
ochOsCdCompensationValue
manual chromatic dispersion compensation value UNITS:ps/nm
columnInteger32.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.36
ochOsPropagateShutdownHoldoffTimer
The hold off time of propagate shutdown. UNITS:milliseconds default value :0
columnUnsigned32.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.37
ochOsSOPVector
The RX SOP (State Of Polarization) Stokes Vector S1 S2 S3 S1: the degree of linearly polarized light aligned to horizontal (X) axis S2: the degree of linearly polarized light alig…
columnOctetString.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.38
ochOsActualFrequency
The actual laser frequency. If rx-frequency is 0, it reflects both Rx and Tx frequency for coherent interface. UNITS:MHz default value :0
columnCoriantTypesFreqGeneric.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.4
ochOsRxFrequency
The rx laser frequency. Special for 0 means it is same as tx laser frequency. Conditions:../../possible-pluggable-types != 'SFP+' UNITS:MHz default value :0
columnCoriantTypesFreq.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.5
ochOsActualRxFrequency
The actual rx laser frequency for coherent interface with separating Lo laser from Tx. 0 means Lo and Tx share the same laser where 'frequency' attriute will indicate both Tx and …
columnCoriantTypesFreqGeneric.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.6
ochOsLaserEnable
The enable switching of output laser. default value :disabled
columnCoriantTypesEnableSwitch.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.7
ochOsRequiredTxOpticalPower
This is to support adjustable optical power of Line side. default value :1.0
columnCoriantTypesOpticalPower.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.8
ochOsActualTxOpticalPower
This is the actual transmitting optical power of Line side. default value :-99.0
columnCoriantTypesOpticalPower.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.9