ochOsLoopbackEnable
CORIANT-GROOVE-MIB ·
.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.19
Object
column
CoriantTypesEnableSwitch
The enable switching of loopback function.
default value :disabled
Context
- MIB
- CORIANT-GROOVE-MIB
- OID
.1.3.6.1.4.1.42229.1.2.4.1.19.1.1.19- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ochOsEntry
- Table
- ochOsTable
- Siblings
- 36
Syntax
CoriantTypesEnableSwitch
- Source
- CoriantTypesEnableSwitch
- Base type
Enumeration
Values & Constraints
Type Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ochOsModulationFormat Currently och-os modulation format | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.1 |
| ochOsFecType The FEC type of och-os
default value :SDFEC25 | column | CoriantTypesOtukFec | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.10 |
| ochOsRxAttenuation This is to support configurable optical attenuation at receiver side which is based on the hardware capability on the port.
default… | column | CoriantTypesOpticalDB | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.11 |
| ochOsTxFilterRollOff Transmitter filter roll off factor.
default value :0.2 | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.12 |
| ochOsPreemphasis Preemphasis of transmitted signal.
default value :enabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.13 |
| ochOsPreemphasisValue Preemphasis of transmitted signal.
default value :1.0 | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.14 |
| ochOsAdminStatus The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independent… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.15 |
| ochOsOperStatus The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operation… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.16 |
| ochOsAvailStatus Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' '… | column | Bits | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.17 |
| ochOsAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.18 |
| ochOsLineEncoding Currently line-encoding mode
default value :non-differential | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.2 |
| ochOsLoopbackType The type mode of loopback function
default value :none | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.20 |
| ochOsServiceLabel Path/service name of cross-connection related facility.
default value : | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.21 |
| ochOsDGD Value of Differential Group Delay
UNITS:ps | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.22 |
| ochOsCD Value of Chromatic Dispersion
UNITS:ps/nm | column | Integer32 | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.23 |
| ochOsOSNR Current value of OSNR.
The result could be OSNR value with dB | column | CoriantTypesOpticalDB | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.24 |
| ochOsQFactor Current value of Q-factor | column | CoriantTypesOpticalDB | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.25 |
| ochOsPreFecBer Current value of PreFEC Bit Error Ratio.
default value :-99.0 | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.26 |
| ochOsCdRangeLow low value of chromatic dispersion search range.
UNITS:ps/nm
default value :-45000 | column | Integer32 | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.27 |
| ochOsCdRangeHigh high value of chromatic dispersion search range.
UNITS:ps/nm
default value :45000 | column | Integer32 | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.28 |
| ochOsPropagateShutdown When the attribute value is set to yes, the transmit laser will
be shutdown if the whole service of the direction has signal failure,
the function mainly used in regeneration node… | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.29 |
| ochOsFrequency The laser frequency. For tx-lo-independent laser-type, it set the tx laser frequency only.
UNITS:MHz
default value :0 | column | CoriantTypesFreq | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.3 |
| ochOsFastSopMode Specify if enable fast SOP (state of polarization) change tracking; if enabled, the interface
will tolerate very fast SOP and transient.
default … | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.31 |
| ochOsRateClass Carried OTN signal basic rate class | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.32 |
| ochOsManagedBy Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
de… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.33 |
| ochOsBICHM The BICHM (bit interleaved coded hybrid modulation) incremental step in 1/128 bits/symbol added to base modulation bits/symbol for the hybrid modes modulation-format.
0: Base mod… | column | Integer32 | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.34 |
| ochOsCdCompensationMode chromatic dispersion compensation value source mode
default value :auto | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.35 |
| ochOsCdCompensationValue manual chromatic dispersion compensation value
UNITS:ps/nm | column | Integer32 | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.36 |
| ochOsPropagateShutdownHoldoffTimer The hold off time of propagate shutdown.
UNITS:milliseconds
default value :0 | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.37 |
| ochOsSOPVector The RX SOP (State Of Polarization) Stokes Vector S1 S2 S3
S1: the degree of linearly polarized light aligned to horizontal (X) axis
S2: the degree of linearly polarized light alig… | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.38 |
| ochOsActualFrequency The actual laser frequency.
If rx-frequency is 0, it reflects both Rx and Tx frequency for coherent interface.
UNITS:MHz
default value :0 | column | CoriantTypesFreqGeneric | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.4 |
| ochOsRxFrequency The rx laser frequency. Special for 0 means it is same as tx laser frequency.
Conditions:../../possible-pluggable-types != 'SFP+'
UNITS:MHz
default value :0 | column | CoriantTypesFreq | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.5 |
| ochOsActualRxFrequency The actual rx laser frequency for coherent interface with separating Lo laser from Tx.
0 means Lo and Tx share the same laser where 'frequency' attriute will indicate both Tx and … | column | CoriantTypesFreqGeneric | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.6 |
| ochOsLaserEnable The enable switching of output laser.
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.7 |
| ochOsRequiredTxOpticalPower This is to support adjustable optical power of Line side.
default value :1.0 | column | CoriantTypesOpticalPower | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.8 |
| ochOsActualTxOpticalPower This is the actual transmitting optical power of Line side.
default value :-99.0 | column | CoriantTypesOpticalPower | .1.3.6.1.4.1.42229.1.2.4.1.19.1.1.9 |