eth40gLldpStatusIf
CORIANT-GROOVE-MIB ·
.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.19
Object
column
Enumeration
Port level lldp control.
Value of 'rxonly', then the LLDP agent will receive lldp,
when lldp-status-ne is also enabled.
Value of 'disabled', then LLDP agent will not filter and
receive LLDP frames on this port. If there is remote systems
information which is received on this port and stored in
the system before the lldp-status becomes disabled,
then the information will naturally age out.
Note: txOnly and txAndRx modes are not supported in Transponder module.
default value :disabled
Context
- MIB
- CORIANT-GROOVE-MIB
- OID
.1.3.6.1.4.1.42229.1.2.4.1.8.1.1.19- Type
- column
- Access
- readonly
- Status
- current
- Parent
- eth40gEntry
- Table
- eth40gTable
- Siblings
- 20
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | notApplicable |
2 | rxonly |
3 | txandrx |
4 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eth40gEthFecType The FEC working type of etyn port.
default value :auto | column | CoriantTypesEthFec | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.1 |
| eth40gClientShutdown The switching of client-shutdown.
default value :no | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.10 |
| eth40gClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0 | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.11 |
| eth40gNearEndAls The switching of near end ALS.
default value :no | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.12 |
| eth40gAlsDegradeMode The switching of defect BERSD-ODU trig ALS
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.13 |
| eth40gLoopbackEnable The enable switching of loopback function.
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.14 |
| eth40gLoopbackType The type mode of loopback function
default value :none | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.15 |
| eth40gTestSignalType The type mode of test signal.
default value :NONE | column | CoriantTypesTestSignalType | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.16 |
| eth40gTestSignalEnable The enable switching of test signal function
default value :NONE | column | CoriantTypesTestSignalConfig | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.17 |
| eth40gServiceLabel Path/service name of cross-connection related facility.
default value : | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.18 |
| eth40gEthFecTypeState The FEC working state of etyn port.
default value :disabled | column | CoriantTypesEthFec | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.2 |
| eth40gHoldoffSignal Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value… | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.20 |
| eth40gManagedBy Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
de… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.21 |
| eth40gTransmitInterpacketgap Specifies the minimum transmit IPG value.
default value :8 | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.3 |
| eth40gGfpPayloadFcs Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed;
Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used.
… | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.4 |
| eth40gMappingMode The mapping mode of client port packets into ODUk.
default value :not-applicable | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.5 |
| eth40gAdminStatus The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independent… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.6 |
| eth40gOperStatus The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operation… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.7 |
| eth40gAvailStatus Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' '… | column | Bits | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.8 |
| eth40gAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.8.1.1.9 |