eth10gAdminStatus
CORIANT-GROOVE-MIB ·
.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.6
Object
column
Enumeration
The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independently of the operability and usage of the resource.
default value :up
Context
- MIB
- CORIANT-GROOVE-MIB
- OID
.1.3.6.1.4.1.42229.1.2.4.1.1.1.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- eth10gEntry
- Table
- eth10gTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | down |
3 | upNoAlm |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eth10gEthFecType The FEC working type of etyn port.
default value :auto | column | CoriantTypesEthFec | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.1 |
| eth10gClientShutdown The switching of client-shutdown.
default value :no | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.10 |
| eth10gClientShutdownHoldoffTimer The hold off time of client shutdown or replacement siganl at egress direction.
UNITS:milliseconds
default value :0 | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.11 |
| eth10gNearEndAls The switching of near end ALS.
default value :no | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.12 |
| eth10gAlsDegradeMode The switching of defect BERSD-ODU trig ALS
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.13 |
| eth10gLoopbackEnable The enable switching of loopback function.
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.14 |
| eth10gLoopbackType The type mode of loopback function
default value :none | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.15 |
| eth10gTestSignalType The type mode of test signal.
default value :NONE | column | CoriantTypesTestSignalType | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.16 |
| eth10gTestSignalEnable The enable switching of test signal function
default value :NONE | column | CoriantTypesTestSignalConfig | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.17 |
| eth10gServiceLabel Path/service name of cross-connection related facility.
default value : | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.18 |
| eth10gLldpStatusIf Port level lldp control.
Value of 'rxonly', then the LLDP agent will receive lldp,
when lldp-status-ne is also enabled.
Value of 'disabled', t… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.19 |
| eth10gEthFecTypeState The FEC working state of etyn port.
default value :disabled | column | CoriantTypesEthFec | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.2 |
| eth10gUpiValue The value of ODU2 upi in PREAMBLE mapping mode.
default value :not-applicable | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.20 |
| eth10gHoldoffSignal Specify if specific signal will be sent out during hold off time
which avoid downstream equipment consequent action in the duration.
default value… | column | CoriantTypesYesNo | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.21 |
| eth10gManagedBy Describes whether this CRS was system created or not.
A system created CRS implies a HW cross connection, that is not
manageable by the user.
de… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.22 |
| eth10gTransmitInterpacketgap Specifies the minimum transmit IPG value.
default value :8 | column | Unsigned32 | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.3 |
| eth10gGfpPayloadFcs Enabled: GFP payload FCS will be used, Ethernet frame FCS will be removed;
Disabled: GFP payload FCS will not be inserted, Ethernet frame FCS will be used.
… | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.4 |
| eth10gMappingMode The mapping mode of client port packets into ODUk.
default value :not-applicable | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.5 |
| eth10gOperStatus The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operation… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.7 |
| eth10gAvailStatus Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' '… | column | Bits | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.8 |
| eth10gAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore | column | OctetString | .1.3.6.1.4.1.42229.1.2.4.1.1.1.1.9 |