amplifierWorkingGainRange
CORIANT-GROOVE-MIB ·
.1.3.6.1.4.1.42229.1.2.3.9.1.1.29
Object
column
AmplifierGainRangeType
The current working gain range
default value :not-available
Context
- MIB
- CORIANT-GROOVE-MIB
- OID
.1.3.6.1.4.1.42229.1.2.3.9.1.1.29- Type
- column
- Access
- readonly
- Status
- current
- Parent
- amplifierEntry
- Table
- amplifierTable
- Siblings
- 29
Syntax
AmplifierGainRangeType
- Source
- AmplifierGainRangeType
- Base type
Enumeration
Values & Constraints
Type Values
1 | standard |
2 | low |
3 | high |
4 | notAvailable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| amplifierName User-defined name assigned to identify a specific amplifier in the device | column | CoriantTypesNameIdentifier | .1.3.6.1.4.1.42229.1.2.3.9.1.1.1 |
| amplifierControlMode Control mode of the amplifier.
default value :auto-max-pw | column | Enumeration | .1.3.6.1.4.1.42229.1.2.3.9.1.1.10 |
| amplifierMode The operating mode of the amplifier
default value :constant-gain | column | Enumeration | .1.3.6.1.4.1.42229.1.2.3.9.1.1.11 |
| amplifierType Type of the amplifier.
default value :variable-gain-EDFA | column | Enumeration | .1.3.6.1.4.1.42229.1.2.3.9.1.1.12 |
| amplifierTargetGain Setting gain to the amplifier for constant-gain mode in manual control mode. | column | CoriantTypesOpticalDB | .1.3.6.1.4.1.42229.1.2.3.9.1.1.13 |
| amplifierOperatingGain Operating gain of the amplifier, which is the actually configured gain on the amplifier. | column | CoriantTypesOpticalDB | .1.3.6.1.4.1.42229.1.2.3.9.1.1.14 |
| amplifierGainAdjustment The value is used for adjustment of gain when the amplifier in automatic control mode,
the automatically caculated gain will include offset of this attribute.
… | column | CoriantTypesOpticalDB | .1.3.6.1.4.1.42229.1.2.3.9.1.1.15 |
| amplifierOutputPowerMon Monitored aggregation signal output power.
UNITS:dBm | column | CoriantTypesOpticalPower | .1.3.6.1.4.1.42229.1.2.3.9.1.1.18 |
| amplifierOutputPowerMonWithAse Monitored aggregation total output power including both signal and ASE.
UNITS:dBm | column | CoriantTypesOpticalPower | .1.3.6.1.4.1.42229.1.2.3.9.1.1.19 |
| amplifierSupportingInputPort Identifier of the supporting input port. | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.42229.1.2.3.9.1.1.2 |
| amplifierInputPowerMon Monitored aggregation input power.
UNITS:dBm | column | CoriantTypesOpticalPower | .1.3.6.1.4.1.42229.1.2.3.9.1.1.20 |
| amplifierOutputVoa Configurable optical attenuation at output of the amplifier.
default value :0.0 | column | CoriantTypesOpticalDB | .1.3.6.1.4.1.42229.1.2.3.9.1.1.21 |
| amplifierPowerBeforeOutputVoa Monitored optical power after output VOA.
UNITS:dBm | column | CoriantTypesOpticalPower | .1.3.6.1.4.1.42229.1.2.3.9.1.1.22 |
| amplifierGainTilt Specify gain tilt of the amplifier.
default value :0.0 | column | CoriantTypesOpticalDB | .1.3.6.1.4.1.42229.1.2.3.9.1.1.23 |
| amplifierTiltControlMode Specify gain tilt control modes.
default value :manual | column | Enumeration | .1.3.6.1.4.1.42229.1.2.3.9.1.1.24 |
| amplifierActualGainTilt Actually setting of gain tilt on the amplifier.
default value :0.0 | column | CoriantTypesOpticalDB | .1.3.6.1.4.1.42229.1.2.3.9.1.1.25 |
| amplifierPumpStatus The amplifier's pump working status, enable or disable
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.3.9.1.1.26 |
| amplifierGainRangeControl The gain range working mode for multi gain range supported amplifier
default value :auto | column | Enumeration | .1.3.6.1.4.1.42229.1.2.3.9.1.1.27 |
| amplifierTargetGainRange The gain-range selected one for manual gain-range-mode
default value :standard | column | AmplifierGainRangeType | .1.3.6.1.4.1.42229.1.2.3.9.1.1.28 |
| amplifierSupportingOutputPort Identifier of the supporting output port. | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.42229.1.2.3.9.1.1.3 |
| amplifierActualOutputVoa Working optical attenuation at output of the amplifier.
default value :0.0 | column | CoriantTypesOpticalDB | .1.3.6.1.4.1.42229.1.2.3.9.1.1.30 |
| amplifierPartnerAmp The partner amplifier for in line amplifier working mode.
default value :not-available | column | OctetString | .1.3.6.1.4.1.42229.1.2.3.9.1.1.31 |
| amplifierEgressAverageChannelPower Based upon the total max power across the 4.8 THz passband.
Defined as optional for ODL support, but shall be considered as mandatory and provided
by the controller when the contr… | column | CoriantTypesOpticalPower | .1.3.6.1.4.1.42229.1.2.3.9.1.1.32 |
| amplifierAdminStatus The administrative state specifies the permission to use or prohibition
against using the resource. The administrative state can be modified by the user, and operates independent… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.3.9.1.1.4 |
| amplifierOperStatus The operational state specifies whether or not a resource is able to provide service.
The operational state shall be visible to the operator. The user cannot modify the operation… | column | Enumeration | .1.3.6.1.4.1.42229.1.2.3.9.1.1.5 |
| amplifierAvailStatus Provided to qualify the operational, usage and/or administrative status attributes.
The value shall be a bits, management interface shall show the string with space separator ' '… | column | Bits | .1.3.6.1.4.1.42229.1.2.3.9.1.1.6 |
| amplifierAliasName User defined alias for this entity. Must be an alphanumeric string with dash or underscore | column | OctetString | .1.3.6.1.4.1.42229.1.2.3.9.1.1.7 |
| amplifierEnable Configuration for enable or disable the amplifier.
default value :disabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.3.9.1.1.8 |
| amplifierInputLosShutdown Enable or disable the function of automatic shutdown per input LOS.
default value :enabled | column | CoriantTypesEnableSwitch | .1.3.6.1.4.1.42229.1.2.3.9.1.1.9 |