genPortFunctionality

CONFIG-MIB · .1.3.6.1.4.1.81.9.1.1.3
MIB view Table view

Object

column mandatory Enumeration 
Describes the functionality of the port according to international standards.

Context

MIB
CONFIG-MIB
OID
.1.3.6.1.4.1.81.9.1.1.3
Type
column
Access
readonly
Status
mandatory
Parent
genPortEntry
Table
genPortTable
Siblings
22

Syntax

Enumeration

Values & Constraints

Enumerated Values
1private
2repeaterAUI
3repeaterThin
4repeater10BaseT
5tenBaseFSyncAct
6foirl
7xcvr
8lobe
9ri
10ro
11serial
12localTalk
13fddi
14clock
15genTokenRing
16dte
17activeLobe
18genActiveTokenRing
19tenBaseFB
20eth10BaseT
21fiber
22wan
23star
24activeRI
25activeRO
26fl
27sonet-oc3
28a100BaseTX
29a100BaseFX
30oc3
31anATM-Main
32anATM-Secondary
33a1000BaseFX
40sonet
41fimVoice
42sdh-stm1
43eth1000BaseSX
44eth1000BaseLX
45eth10BaseFL
46ethLAG
47lag100
48lag1000
49eth1000BaseTX
50eth1000BaseCX
51gBICNotPresent
52gBICNotSupported
53eth1000BaseX-Proprietary
54oc12
55sFP-NotPresent
56sFP-NotSupported
57eth10BaseTwInPWR
58eth100BaseTXwInPWR

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
genPortGroupId mandatory
Index which identifies the group inside the chassis for which this entry contains information. Equals the number of the slot by which the group containing the port is accessed. Th…
columnInteger32.1.3.6.1.4.1.81.9.1.1.1
genPortAdminStatus mandatory
A disabled port neither transmits nor receives. The port must be explicitly enabled to restore operation. For token ring ports, this attribute is read-only.
columnEnumeration.1.3.6.1.4.1.81.9.1.1.10
genPortSpecificOID mandatory
This attribute provides the OID of another group containing additional more specific information regarding this instance.
columnObjectIdentifier.1.3.6.1.4.1.81.9.1.1.11
genPortThresholdStatus mandatory
This item is a bitmap that defines the threshold status of the port, in relation to the alarmPolicyTable. If the port is monitored by the agent according to policy number x in t…
columnOctetString.1.3.6.1.4.1.81.9.1.1.12
genPortEavesdropping mandatory
Eavesdropping security mechanism (Off or On) assigned to this port. On - perform Eavesdropping security mechanism in the port. The information is coded in internal format.
columnOctetString.1.3.6.1.4.1.81.9.1.1.13
genPortFaultMask mandatory
Each bit of this item describes the situation of the port regarding specific fault. For example: bit 1: on indicates 'port autopartition fault' bit4 : on indicates 'Ethernet port …
columnOctetString.1.3.6.1.4.1.81.9.1.1.14
genPortSWRdFault mandatory
Attribute that reports to the Agent of any fault occurs in the port for the Soft Redundancy application
columnEnumeration.1.3.6.1.4.1.81.9.1.1.15
genPortActivation mandatory
A disabled port neither transmits nor receives. The port must be Explicitly enabled to restore operation.
columnEnumeration.1.3.6.1.4.1.81.9.1.1.16
genPortFunctionalStatus mandatory
The functional status of the port: ok(1) - fully functional port, transmitting and receiving packets. rld(2) - receive link down condition on the port - Indicates a cable or con…
columnEnumeration.1.3.6.1.4.1.81.9.1.1.17
genPortIfMap mandatory
This MIB object defines the mapping of the LANNET box port to a MIB-II interface. If the port corresponds to a stack of interfaces - like the case of ATM ports, the interface nu…
columnInteger32.1.3.6.1.4.1.81.9.1.1.18
genPortVLANMode mandatory
This item defines the VLAN operation mode of the port: perPortOnly(1) - indicates that all received packets are mapped to the VLAN, defined on the port, and packet…
columnEnumeration.1.3.6.1.4.1.81.9.1.1.19
genPortId mandatory
Index which identifies the port inside the group for which this entry contains information. It generally corresponds with the number by which the port is identified and is marked …
columnInteger32.1.3.6.1.4.1.81.9.1.1.2
genPortAdminPermission mandatory
This item defines whether or not the Agent is permitted to change a Port Status from Disable to Enable. Permit(1) - The agent is permitted to do so. NotPermit(2) - The agent is…
columnEnumeration.1.3.6.1.4.1.81.9.1.1.20
genPortName mandatory
Name of the port in ASCII format, mainly filled by network managers for easily recognize the specific use of a switched port.
columnOctetString.1.3.6.1.4.1.81.9.1.1.21
genPortClassification mandatory
Classification assigned to this port. regular - this port is connected to regular stations. Topology changes that may occur on it will not generate the sending of topology change …
columnEnumeration.1.3.6.1.4.1.81.9.1.1.22
genPortVLANBindingMode mandatory
VLAN binding mode assigned to this port. static - this port supports only the egress VLAN list as configured manually in its corresponding dot1qVlanStaticEgressPort. This is th…
columnEnumeration.1.3.6.1.4.1.81.9.1.1.23
genPortType mandatory
Attribute describing the type of port.
columnEnumeration.1.3.6.1.4.1.81.9.1.1.4
genPortDescr mandatory
Descriptor of the port in ASCII (readable) format, mainly for use with generic management applications.
columnOctetString.1.3.6.1.4.1.81.9.1.1.5
genPortActivityStatus mandatory
This attribute defines the status of ports that may be part of a redundancy scheme. notActive(1) - indicates a disabled port which cannot transmit or receive packets even if inc…
columnEnumeration.1.3.6.1.4.1.81.9.1.1.6
genPortSecurityPolicy mandatory
Security policy (noPolicy or Trap Only or Trap and Close) assigned to this port. noPolicy - do not perform intrusion control security mechanism. Trap Only - perform intrusion cont…
columnOctetString.1.3.6.1.4.1.81.9.1.1.7
genPortSecureAddresses mandatory
This attribute defines the security information (physical addresses) relevant for the entry. Coded in internal format, cryptographic methods may be used for privacy purposes.
columnOctetString.1.3.6.1.4.1.81.9.1.1.8
genPortIntPortConnection mandatory
The value of this attribute defines the internal port to which the port is connected. A value 0 of this attribute would indicate no internal port connection (stand-alone mode). An…
columnInteger32.1.3.6.1.4.1.81.9.1.1.9