genPortDescr
CONFIG-MIB ·
.1.3.6.1.4.1.81.9.1.1.5
Object
column
mandatory
OctetString
Descriptor of the port in ASCII (readable) format, mainly for use with generic management applications.
Context
- MIB
- CONFIG-MIB
- OID
.1.3.6.1.4.1.81.9.1.1.5- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- genPortEntry
- Table
- genPortTable
- Siblings
- 22
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| genPortGroupId mandatory Index which identifies the group inside the chassis for which this
entry contains information. Equals the number of the slot by which
the group containing the port is accessed. Th… | column | Integer32 | .1.3.6.1.4.1.81.9.1.1.1 |
| genPortAdminStatus mandatory A disabled port neither transmits nor receives. The port must be explicitly
enabled to restore operation. For token ring ports, this attribute is read-only. | column | Enumeration | .1.3.6.1.4.1.81.9.1.1.10 |
| genPortSpecificOID mandatory This attribute provides the OID of another group containing
additional more specific information regarding this instance. | column | ObjectIdentifier | .1.3.6.1.4.1.81.9.1.1.11 |
| genPortThresholdStatus mandatory This item is a bitmap that defines the threshold status of
the port, in relation to the alarmPolicyTable. If the port is
monitored by the agent according to policy number x in t… | column | OctetString | .1.3.6.1.4.1.81.9.1.1.12 |
| genPortEavesdropping mandatory Eavesdropping security mechanism (Off or On) assigned to this port.
On - perform Eavesdropping security mechanism in the port.
The information is coded in internal format. | column | OctetString | .1.3.6.1.4.1.81.9.1.1.13 |
| genPortFaultMask mandatory Each bit of this item describes the situation of the port
regarding specific fault. For example:
bit 1: on indicates 'port autopartition fault'
bit4 : on indicates 'Ethernet port … | column | OctetString | .1.3.6.1.4.1.81.9.1.1.14 |
| genPortSWRdFault mandatory Attribute that reports to the Agent of any fault occurs in the
port for the Soft Redundancy application | column | Enumeration | .1.3.6.1.4.1.81.9.1.1.15 |
| genPortActivation mandatory A disabled port neither transmits nor receives. The port must be
Explicitly enabled to restore operation. | column | Enumeration | .1.3.6.1.4.1.81.9.1.1.16 |
| genPortFunctionalStatus mandatory The functional status of the port:
ok(1) - fully functional port, transmitting and receiving packets.
rld(2) - receive link down condition on the port - Indicates
a cable or con… | column | Enumeration | .1.3.6.1.4.1.81.9.1.1.17 |
| genPortIfMap mandatory This MIB object defines the mapping of the LANNET box port to a
MIB-II interface. If the port corresponds to a stack of interfaces - like
the case of ATM ports, the interface nu… | column | Integer32 | .1.3.6.1.4.1.81.9.1.1.18 |
| genPortVLANMode mandatory This item defines the VLAN operation mode of the port:
perPortOnly(1) - indicates that all received packets are mapped to the VLAN, defined on the
port, and packet… | column | Enumeration | .1.3.6.1.4.1.81.9.1.1.19 |
| genPortId mandatory Index which identifies the port inside the group for which this
entry contains information. It generally corresponds with the number
by which the port is identified and is marked … | column | Integer32 | .1.3.6.1.4.1.81.9.1.1.2 |
| genPortAdminPermission mandatory This item defines whether or not the Agent is permitted to change a
Port Status from Disable to Enable.
Permit(1) - The agent is permitted to do so.
NotPermit(2) - The agent is… | column | Enumeration | .1.3.6.1.4.1.81.9.1.1.20 |
| genPortName mandatory Name of the port in ASCII format, mainly filled by network
managers for easily recognize the specific use of a switched port. | column | OctetString | .1.3.6.1.4.1.81.9.1.1.21 |
| genPortClassification mandatory Classification assigned to this port.
regular - this port is connected to regular stations.
Topology changes that may occur on it will not generate the
sending of topology change … | column | Enumeration | .1.3.6.1.4.1.81.9.1.1.22 |
| genPortVLANBindingMode mandatory VLAN binding mode assigned to this port.
static - this port supports only the egress VLAN list as configured
manually in its corresponding
dot1qVlanStaticEgressPort. This is th… | column | Enumeration | .1.3.6.1.4.1.81.9.1.1.23 |
| genPortFunctionality mandatory Describes the functionality of the port according to international standards. | column | Enumeration | .1.3.6.1.4.1.81.9.1.1.3 |
| genPortType mandatory Attribute describing the type of port. | column | Enumeration | .1.3.6.1.4.1.81.9.1.1.4 |
| genPortActivityStatus mandatory This attribute defines the status of ports that may be part of a redundancy scheme.
notActive(1) - indicates a disabled port which cannot transmit or receive
packets even if inc… | column | Enumeration | .1.3.6.1.4.1.81.9.1.1.6 |
| genPortSecurityPolicy mandatory Security policy (noPolicy or Trap Only or Trap and Close) assigned to this port.
noPolicy - do not perform intrusion control security mechanism.
Trap Only - perform intrusion cont… | column | OctetString | .1.3.6.1.4.1.81.9.1.1.7 |
| genPortSecureAddresses mandatory This attribute defines the security information (physical addresses)
relevant for the entry. Coded in internal format, cryptographic
methods may be used for privacy purposes. | column | OctetString | .1.3.6.1.4.1.81.9.1.1.8 |
| genPortIntPortConnection mandatory The value of this attribute defines the internal port to which the port
is connected. A value 0 of this attribute would indicate no internal
port connection (stand-alone mode). An… | column | Integer32 | .1.3.6.1.4.1.81.9.1.1.9 |