genGroupShowModuleInformation
CONFIG-MIB ·
.1.3.6.1.4.1.81.8.1.1.51
Object
String that includes all information of the Show Module CLI Command. TAB String indicates new column, while CR String indicates new line.
Context
- MIB
- CONFIG-MIB
- OID
.1.3.6.1.4.1.81.8.1.1.51- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- genGroupEntry
- Table
- genGroupTable
- Siblings
- 56
Syntax
RFC1213-MIBDisplayString
- Source
- RFC1213-MIBDisplayString
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| genGroupId mandatory Index which identifies the group inside the chassis for which this
entry contains information. Equals the number of the slot by which
the group is accessed. This value is never gr… | column | Integer32 | .1.3.6.1.4.1.81.8.1.1.1 |
| genGroupFullConfig obsolete Attribute describing the full configuration of a group in internal
application format. | column | OctetString | .1.3.6.1.4.1.81.8.1.1.10 |
| genGroupRedun12 mandatory Value on(1) of this attribute defines a redundancy (backup) relationship
between synchronous external ports 1 and 2 on a module.
Value blocked(3) of this attribute defines that … | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.11 |
| genGroupRedun34 mandatory Value ON of this attribute defines a redundancy (backup) relationship
between synchronous external ports 3 and 4 on a module. | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.12 |
| genGroupRedun13-14 mandatory Value ON of this attribute defines a redundancy (backup) relationship
between synchronous external ports 13 and 14 on a module. | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.13 |
| genGroupStandAloneMode mandatory Value ON of this attribute indicates the sensor's operation Stand Alone
mode . Internal ports are disabled and the card functions in a local
star configuration toward its extern… | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.14 |
| genGroupInterProcCommStatus mandatory This attribute describes the status of the communication between the
microprocessor of the sensor and the microprocessor of the agent on cards
with embedded agents. | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.15 |
| genGroupCommStatus mandatory This attribute describes the communication status of the group with
the SNMP Agent as detected and reported by the agent. | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.16 |
| genGroupHWStatus mandatory This attribute describes the status of the group hardware as detected
by the sensors software. | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.17 |
| genGroupSupplyVoltageFault mandatory A value 'on' of this attribute informs of a 'voltage supply
out-of-range' error condition on sensor equipped with
hardware which checks this condition. | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.18 |
| genGroupIntTemp mandatory Internal temperature of the enclosure as measured by the
specific module instance.Value '999' means not supported. | column | Integer32 | .1.3.6.1.4.1.81.8.1.1.19 |
| genGroupSWVersion mandatory ASCII string for description and display of the group software version. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.81.8.1.1.2 |
| genGroupSpecificOID mandatory This attribute provides the OID of another group containing
additional more specific information regarding this instance. | column | ObjectIdentifier | .1.3.6.1.4.1.81.8.1.1.20 |
| genGroupConfigurationSymbol mandatory Defines the Configuration Symbol attached to any hardware module manufactured.
One single character A..Z defines the CS version. For older modules which did not
support this opti… | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.81.8.1.1.21 |
| genGroupLastChange mandatory This attribute contains the value of sysUpTime at the time any change
pertaining to the specified group occurred. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.81.8.1.1.22 |
| genGroupRedunRecovery mandatory This attribute is relevant for the cards with redundancy feature (LTR-108F).
It defines the behaviour in case of main port failure:
on(1) - the data path returns to the main port … | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.23 |
| genGroupHWVersion mandatory Defines the Hardware version of the module.
Current modules use a single character A - D.
Very old modules which do not support this mib will be returned an asterisk '*' | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.81.8.1.1.24 |
| genGroupHeight mandatory This item describes the physical height of the module in Us (1U=1.75''). | column | Integer32 | .1.3.6.1.4.1.81.8.1.1.25 |
| genGroupWidth mandatory This item describes the physical width of the module in HP units (1HP=0.5 mm). | column | Integer32 | .1.3.6.1.4.1.81.8.1.1.26 |
| genGroupIntrusionControl mandatory Group intrusion security mode (not supported or
Security Bypass or Secure) assigned to this module.
Security Bypass - all ports in this group are not secure.
Secure - ports in th… | column | OctetString | .1.3.6.1.4.1.81.8.1.1.27 |
| genGroupThresholdStatus mandatory This item is a bitmap that defines the threshold status of the
module, in relation to the alarmPolicyTable. If the ring is
monitored by the agent according to policy number x in… | column | OctetString | .1.3.6.1.4.1.81.8.1.1.28 |
| genGroupEavesdropping mandatory Group eavesdropping security mode (not supported or
Security Bypass or Secure) assigned to this module.
Security Bypass - all ports in this group are not secure.
Secure - ports i… | column | OctetString | .1.3.6.1.4.1.81.8.1.1.29 |
| genGroupKernelVersion mandatory ASCII string for description and display of the group kernel version. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.81.8.1.1.3 |
| genGroupMainSWVersion mandatory ASCII string for description and display of the main CPU software
version in modules that utilize more than one management processor. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.81.8.1.1.30 |
| genGroupMPSActivityStatus mandatory This attribute defines the status of the main
PS inside the stackable hub. | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.31 |
| genGroupBUPSActivityStatus mandatory This attribute defines the status of the backup PS
externally connected to the module. | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.32 |
| genGroupPrepareCounters mandatory This item should help the agent to prepare
a large amount of counters. The agent should
reset this value to none(1), when it has terminated
to prepare the counters.
fethGroupCount… | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.33 |
| genGroupPortLastChange mandatory This item contains the last two bytes of the TimeStamp of
the last change of each port as follows:
Bytes 0 -1: port 1,
Bytes 2 -3: port 2,
Bytes 4 -5: port 3, and so on.
No trap… | column | OctetString | .1.3.6.1.4.1.81.8.1.1.34 |
| genGroupIntPortLastChange mandatory This item contains the last two bytes of the TimeStamp of
the last change of each internal port as follows:
Bytes 0 -1: internal port 1,
Bytes 2 -3: internal port 2,
Bytes 4 -5: … | column | OctetString | .1.3.6.1.4.1.81.8.1.1.35 |
| genGroupFaultMask mandatory Each bit of this item describes the situation of the
group regarding specific fault.
For example:
bit 1: on indicates 'module internal
communication problem'
bit 2 : on indicates… | column | OctetString | .1.3.6.1.4.1.81.8.1.1.36 |
| genGroupTypeName mandatory String with the module name. | column | OctetString | .1.3.6.1.4.1.81.8.1.1.37 |
| genGroupAgentSlot mandatory This attribute defines the slot number of the Agent supporting this group.
If there is multiplexor, than the value will be the multiplxor slot number.
If there is no multiplexor, … | column | Integer32 | .1.3.6.1.4.1.81.8.1.1.38 |
| genGroupMngType mandatory This attribute defines the management type of the module. | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.39 |
| genGroupType mandatory Attribute describing the type of the group (module). | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.4 |
| genGroupNumberOfLogicalPorts mandatory Number of logical ports in group.
The logical ports represent the Link Aggregation Groups (LAGs) associated with
that module/switch. It is assumed that on each group the logical p… | column | Integer32 | .1.3.6.1.4.1.81.8.1.1.40 |
| genGroupNumberOfInterfaces mandatory The number of network interfaces (regardless of their current state)
present on this module. This will help determined the ifNumber for the entire system | column | Integer32 | .1.3.6.1.4.1.81.8.1.1.41 |
| genGroupCascadUpStatus mandatory The functional status of the P330 two cascading-up ports:
ok(1) - fully functional ports, transmitting and receiving packets.
rld(2) - receive link down condition on at least one … | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.42 |
| genGroupCascadDownStatus mandatory The functional status of the P330 two cascading-down ports:
ok(1) - fully functional ports, transmitting and receiving packets.
rld(2) - receive link down condition on at least on… | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.43 |
| genGroupSTARootPortID mandatory The port ID. Number through which the STA Root bridge can be reached.
If it is one of the P330 backplane port, its port id. will be from 201 to 204,
as referring to backplane Guit… | column | Integer32 | .1.3.6.1.4.1.81.8.1.1.44 |
| genGroupCopyPortInstruction mandatory This variable is used internally by the P330 Master for sending a contracted instruction code to
every Slave agent of the stack. The instruction is coded as follows:
1st Octet: 0… | column | OctetString | .1.3.6.1.4.1.81.8.1.1.45 |
| genGroupLicenseKey mandatory This MIB item contains the authorization key for SMON application,
and for other applications in the future. | column | OctetString | .1.3.6.1.4.1.81.8.1.1.46 |
| genGroupLogFileClear mandatory This attribute enables the user to clear all the log files attached of a specific module. | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.47 |
| genGroupBootVersion mandatory ASCII string for description and display of the booter version of the module. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.81.8.1.1.48 |
| genGroupResetLastStamp mandatory This attribute contains the value of sysUpTime at the time it polled | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.81.8.1.1.49 |
| genGroupDescr mandatory Descriptor of the group in ASCII (readable) format, mainly for use with
generic management applications. | column | OctetString | .1.3.6.1.4.1.81.8.1.1.5 |
| genGroupSerialNumber mandatory The burnt-in identifier of the device. This is a unique 7-digits number | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.81.8.1.1.50 |
| genGroupCascadingUpFault mandatory Enable /Disable the sending of cascading up fault traps for this module. | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.52 |
| genGroupCascadingDownFault mandatory Enable /Disable the sending of cascading down fault traps for this module. | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.53 |
| genGroupPortClassificationMask mandatory This is a mask of the port classification values of all ports of this module.
The index of the bits starts from 0, where bit 0 is unused.
If the n bit has value of 1 - it means th… | column | OctetString | .1.3.6.1.4.1.81.8.1.1.54 |
| genGroupPSUType mandatory This attribute defines the type main PSU of each module. | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.55 |
| genGroupPolicyType mandatory This attribute defines whether the module active
policy-list is enforced on all packets or only on routed
packets. | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.56 |
| genGroupFips140Ready mandatory This attribute reports on when module was manufactured compliant
to FIPS 140-2 standard. When reports off the module
is not FIPS compliant and cannot operate in FIPS approved
mo… | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.57 |
| genGroupNumberOfPorts mandatory Number of ports in group. It is assumed that on each group the ports
are assigned unique numbers in the range from 1 to genGroupNumberOfPorts.
They correspond to the number of po… | column | Integer32 | .1.3.6.1.4.1.81.8.1.1.6 |
| genGroupNumberOfIntPorts mandatory Number of internal ports (ports connected to the chassis buses) on
the module. | column | Integer32 | .1.3.6.1.4.1.81.8.1.1.7 |
| genGroupReset mandatory Setting the value of this attribute to 'on' is interpreted as a software
RESET command. Sensor software is reinitialized and according to the
sensor specifications, partial or to… | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.8 |
| genGroupAutoMan mandatory This attribute reflects the status of the Auto/Manual switch which
defines the working mode of sensors. In the MANUAL mode no set
operations may be performed on attributes relat… | column | Enumeration | .1.3.6.1.4.1.81.8.1.1.9 |