chHWPSUTypeName
CONFIG-MIB ·
.1.3.6.1.4.1.81.7.11.1.1.10
Object
column
mandatory
OctetString
String with the power supply name.
Context
- MIB
- CONFIG-MIB
- OID
.1.3.6.1.4.1.81.7.11.1.1.10- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- chHWPSUEntry
- Table
- chHWPSUTable
- Siblings
- 12
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| chHWPSUId mandatory PSU index for identifying the PSU.
The index for each hub:
Stackable: odd number - internal, even number - backup
LET 36: 1 - lower; 2 - higher,
LET 20: 1 - right; 2 - left,
LET 1… | column | Integer32 | .1.3.6.1.4.1.81.7.11.1.1.1 |
| chHWPSUDescr mandatory Descriptor of the PSU in ASCII format. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.81.7.11.1.1.11 |
| chHWPSUPoECapacity mandatory Indicates the maximum PoE power in milliwatts
provided by this PSU. | column | Integer32 | .1.3.6.1.4.1.81.7.11.1.1.12 |
| chHWPSUPoEConsumption mandatory Indicates the PoE power consumption in milliwatts
drawn from this PSU. | column | Integer32 | .1.3.6.1.4.1.81.7.11.1.1.13 |
| chHWPSUActivityStatus mandatory This attribute defines the status of the PSU in what concerns
supplying power to the chassis.
NotActive(1) - indicates a disabled or defective PSU which cannot supply
power to… | column | Enumeration | .1.3.6.1.4.1.81.7.11.1.1.2 |
| chHWPSULocation mandatory Describes the location of the PSU:
LET-36: lower, upper.
LET-20: right, left.
LET-10: unknown. | column | Enumeration | .1.3.6.1.4.1.81.7.11.1.1.3 |
| chHWPSUVoltage mandatory Indicates voltage of PSU expressed in milliVolts. | column | Integer32 | .1.3.6.1.4.1.81.7.11.1.1.4 |
| chHWPSUVoltHighThresh mandatory Indicates voltage High threshold of the PSU in the HUB.
The PSU output working voltage needed to support a module
in the HUB should be V +/- 5%. This value is hard-coded.
The Age… | column | Integer32 | .1.3.6.1.4.1.81.7.11.1.1.5 |
| chHWPSUVoltLowThresh mandatory Indicates voltage Low threshold of the PSU in the HUB.
The PSU output working voltage needed to support a module
in the HUB should be V +/- 5%. This value is hard-coded.
The Agen… | column | Integer32 | .1.3.6.1.4.1.81.7.11.1.1.6 |
| chHWPSUCapacity mandatory Indicates the maximum of electrical power of PSU
expressed in milliWatts. | column | Integer32 | .1.3.6.1.4.1.81.7.11.1.1.7 |
| chHWPSUConsumption mandatory Indicates the consumption of electrical power of PSU
expressed in milliWatts. | column | Integer32 | .1.3.6.1.4.1.81.7.11.1.1.8 |
| chHWPSUType mandatory Attribute describing the type of the PSU. | column | Enumeration | .1.3.6.1.4.1.81.7.11.1.1.9 |