chHWPSULocation

CONFIG-MIB · .1.3.6.1.4.1.81.7.11.1.1.3

MIB view Table view

Object

column mandatory Enumeration

Describes the location of the PSU:
LET-36: lower, upper.
LET-20: right, left.
LET-10: unknown.

Context

MIB: CONFIG-MIB
OID: .1.3.6.1.4.1.81.7.11.1.1.3
Type: column
Access: readonly
Status: mandatory
Parent: chHWPSUEntry
Table: chHWPSUTable
Siblings: 12

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	other
`2`	internal
`3`	external
`4`	right
`5`	left
`6`	lower
`7`	upper
`8`	unknown
`9`	notExist
`10`	middle

Related Objects

Sibling Objects

Object	Type	Syntax	OID
chHWPSUId mandatory PSU index for identifying the PSU. The index for each hub: Stackable: odd number - internal, even number - backup LET 36: 1 - lower; 2 - higher, LET 20: 1 - right; 2 - left, LET 1…	column	Integer32	`.1.3.6.1.4.1.81.7.11.1.1.1`
chHWPSUTypeName mandatory String with the power supply name.	column	OctetString	`.1.3.6.1.4.1.81.7.11.1.1.10`
chHWPSUDescr mandatory Descriptor of the PSU in ASCII format.	column	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.81.7.11.1.1.11`
chHWPSUPoECapacity mandatory Indicates the maximum PoE power in milliwatts provided by this PSU.	column	Integer32	`.1.3.6.1.4.1.81.7.11.1.1.12`
chHWPSUPoEConsumption mandatory Indicates the PoE power consumption in milliwatts drawn from this PSU.	column	Integer32	`.1.3.6.1.4.1.81.7.11.1.1.13`
chHWPSUActivityStatus mandatory This attribute defines the status of the PSU in what concerns supplying power to the chassis. NotActive(1) - indicates a disabled or defective PSU which cannot supply power to…	column	Enumeration	`.1.3.6.1.4.1.81.7.11.1.1.2`
chHWPSUVoltage mandatory Indicates voltage of PSU expressed in milliVolts.	column	Integer32	`.1.3.6.1.4.1.81.7.11.1.1.4`
chHWPSUVoltHighThresh mandatory Indicates voltage High threshold of the PSU in the HUB. The PSU output working voltage needed to support a module in the HUB should be V +/- 5%. This value is hard-coded. The Age…	column	Integer32	`.1.3.6.1.4.1.81.7.11.1.1.5`
chHWPSUVoltLowThresh mandatory Indicates voltage Low threshold of the PSU in the HUB. The PSU output working voltage needed to support a module in the HUB should be V +/- 5%. This value is hard-coded. The Agen…	column	Integer32	`.1.3.6.1.4.1.81.7.11.1.1.6`
chHWPSUCapacity mandatory Indicates the maximum of electrical power of PSU expressed in milliWatts.	column	Integer32	`.1.3.6.1.4.1.81.7.11.1.1.7`
chHWPSUConsumption mandatory Indicates the consumption of electrical power of PSU expressed in milliWatts.	column	Integer32	`.1.3.6.1.4.1.81.7.11.1.1.8`
chHWPSUType mandatory Attribute describing the type of the PSU.	column	Enumeration	`.1.3.6.1.4.1.81.7.11.1.1.9`