cmmTransLengthOM3
CMM-CHASSIS-MIB ·
.1.3.6.1.4.1.36673.100.1.2.2.1.24
Object
column
10 m Integer32
Link length supported for 50 um OM3 fiber, units of 10 m. '-100001' indicates unavailable
Context
- MIB
- CMM-CHASSIS-MIB
- OID
.1.3.6.1.4.1.36673.100.1.2.2.1.24- Type
- column
- Access
- readonly
- Status
- current
- Units
- 10 m
- Parent
- cmmTransEEPROMEntry
- Table
- cmmTransEEPROMTable
- Siblings
- 40
Syntax
10 m Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cmmTransIndex A unique value, greater than zero,for each slot within the unit | column | Integer32 | .1.3.6.1.4.1.36673.100.1.2.2.1.1 |
| cmmTransSonetCompliance Sonet Compliance codes of transceiver.
Blank indicates unavailable | column | Bits | .1.3.6.1.4.1.36673.100.1.2.2.1.10 |
| cmmTransFiberChnlLinkLen Fiber Channel Link Length.
Blank indicates unavailable | column | Bits | .1.3.6.1.4.1.36673.100.1.2.2.1.11 |
| cmmTransFiberChnlTransTech Fiber Channel Transmitter Technology.
Blank indicates unavailable | column | Bits | .1.3.6.1.4.1.36673.100.1.2.2.1.12 |
| cmmTransFiberChnlTransMedia Fiber Channel Transmitter Media.
Blank indicates unavailable | column | Bits | .1.3.6.1.4.1.36673.100.1.2.2.1.13 |
| cmmTransSFPFiberChnlSpeed SFP Fiber Channel Speed.
Blank indicates unavailable | column | Bits | .1.3.6.1.4.1.36673.100.1.2.2.1.14 |
| cmmTransQSFPFiberChnlSpeed QSFP Fiber Channel Speed.
Blank indicates unavailable | column | Bits | .1.3.6.1.4.1.36673.100.1.2.2.1.15 |
| cmmTransSFPInfiniBandCompliance SFP InfiniBand Compliance. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.2.1.16 |
| cmmTransSFPEsconCompliance SFP Enterprise Systems Connection compliance. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.2.1.17 |
| cmmTransSfpPlusCableTech SFP+ Cable Technology. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.2.1.18 |
| cmmTransEncoding Code for high speed serial encoding algorithm. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.2.1.19 |
| cmmTransType Transceiver type | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.2.1.2 |
| cmmTransLengthKmtrs Link length supported for single mode fiber, units of km.
'-100001' indicates unavailable | column | km Integer32 | .1.3.6.1.4.1.36673.100.1.2.2.1.20 |
| cmmTransLengthMtrs Link length supported for single mode fiber, units of 100 m.
'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | 100 m Integer32 | .1.3.6.1.4.1.36673.100.1.2.2.1.21 |
| cmmTransLengthOM1 Link length supported for 62.5 um OM1 fiber, units of 10 m.
'-100001' indicates unavailable | column | 10 m Integer32 | .1.3.6.1.4.1.36673.100.1.2.2.1.22 |
| cmmTransLengthOM2 Link length supported for 50 um OM2 fiber, units of 10 m.
'-100001' indicates unavailable | column | 10 m Integer32 | .1.3.6.1.4.1.36673.100.1.2.2.1.23 |
| cmmTransLengthOM4 Link length supported for 50 um OM4 fiber, units of 10 m.
'-100001' indicates unavailable | column | 10 m Integer32 | .1.3.6.1.4.1.36673.100.1.2.2.1.25 |
| cmmTransVendorName Transceiver vendor name.
Blank indicates unavailable | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.36673.100.1.2.2.1.26 |
| cmmTransVendorOUI Transceiver vendor IEEE company ID.
Blank indicates unavailable | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.36673.100.1.2.2.1.27 |
| cmmTransVendorPartNumber Part number provided by tarnsceiver vendor.
Blank indicates unavailable | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.36673.100.1.2.2.1.28 |
| cmmTransVendorRevision Revision level for part number provided by vendor.
Blank indicates unavailable | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.36673.100.1.2.2.1.29 |
| cmmTransNoOfChannels Number of channels available for this transceiver.
'-100001' indicates unavailable | column | Integer32 | .1.3.6.1.4.1.36673.100.1.2.2.1.3 |
| cmmTransCheckCode Check code for Base ID Fields.
Blank indicates unavailable | column | OctetString | .1.3.6.1.4.1.36673.100.1.2.2.1.30 |
| cmmTransCheckCodeExtended Check code for the Extended ID Fields.
Blank indicates unavailable | column | OctetString | .1.3.6.1.4.1.36673.100.1.2.2.1.31 |
| cmmTransNominalBitRate Nominal signalling rate, units of 100MBd.
'-100001' indicates unavailable | column | 100MBd Integer32 | .1.3.6.1.4.1.36673.100.1.2.2.1.32 |
| cmmTransBitRateMax Upper bit rate margin, units of 1% above the Nominal Bit Rate.
Value '0' indicates this field is not specified.
'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | Integer32 | .1.3.6.1.4.1.36673.100.1.2.2.1.33 |
| cmmTransBitRateMin Lower bit rate margin, units of 1% below the Nominal Bit Rate.
Value '0' indicates this field is not specified.
'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | Integer32 | .1.3.6.1.4.1.36673.100.1.2.2.1.34 |
| cmmTransVendorSerialNumber Serial number provided by vendor.
Blank indicates unavailable | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.36673.100.1.2.2.1.35 |
| cmmTransDateCode Vendor's manufacturing date code.
Blank indicates unavailable | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.36673.100.1.2.2.1.36 |
| cmmTransDDMSupport Indicates whether diagnostics monitoring is
supported or not. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.2.1.37 |
| cmmTransMaxCaseTemp Maximum case temperature in Celsius.'-100001' indicates unavailable
'-100002' indicates not-applicable. | column | 0.01 C Integer32 | .1.3.6.1.4.1.36673.100.1.2.2.1.38 |
| cmmTransSFPOptionsImp Transceiver Options Implemented for SFP Transceiver.
Blank indicates unavailable | column | Bits | .1.3.6.1.4.1.36673.100.1.2.2.1.39 |
| cmmTransidentifier The Type of transceiver present eg:SFP/SFP+/SFP28/QSFP/QSFP+/QSFP28. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.2.1.4 |
| cmmTransQSFPOptionsImp Transceiver Options Implemented for QSFP Transceiver.
Blank indicates unavailable | column | Bits | .1.3.6.1.4.1.36673.100.1.2.2.1.40 |
| cmmTransPresence Indicates Transceiver presence status. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.2.1.41 |
| cmmTransSFPextendedidentifier Extended identifier of SFP transceiver for additional information. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.2.1.5 |
| cmmTransQSFPextendedidentifier Extended identifier of QSFP transceiver for additional information.
Blank indicates unavailable | column | Bits | .1.3.6.1.4.1.36673.100.1.2.2.1.6 |
| cmmTransconnectortype Connector type for the transceiver. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.2.1.7 |
| cmmTransEthCompliance Values of Ethernet Compliance codes. | column | Enumeration | .1.3.6.1.4.1.36673.100.1.2.2.1.8 |
| cmmTransExtEthCompliance Bitmap of Extended Ethernet Compliance codes.
Blank indicates unavailable | column | Bits | .1.3.6.1.4.1.36673.100.1.2.2.1.9 |