componentLevelActivityVpdTopologyPath

CME-MIB · .1.3.6.1.4.1.2.3.51.2.2.21.22.1.15

Object

column mandatory OctetString
The chassis and each installed component is represented by a hardware 
topology tree, where each node in the tree represents a component. 
              
As an example, the root of the tree is the chassis and is represented
by the pair 'CHASSIS, 1'. This pair indicates the first instance of
the chassis. If a blade is inserted in slot 4 of the chassis, its
topology path is 'CHASSIS, 1, BLADE, 4'. With this format, the
components in the chassis can be determined along with their relative
hierarchy to each other.
              
The topology path's numeric designations for the components are:
              
 CHASSIS,                0x01   Chassis
 MM,                     0x02   Management Module
 BLADE,                  0x03   Main system board of a blade
 POWER,                  0x04   Power Supply, Power Module, etc
 COOLING,                0x05   Fan, blower, or other cooling device
 IO_MODULE,              0x06   Has I/O interface, i.e. - switch or bridge
 MEDIA,                  0x07   Media device
 PROCESSOR,              0x08   Any processor, processor module, etc
 STORAGE,                0x09   Any type of storage device
 EXPANSION,              0x0A   Expansion Card (not covered by more specific type)
 MEMORY,                 0x0B   Any memory device, module, etc
 MFRU,                   0x0C   Managed FRU Device
 PANEL,                  0x0D   Any sort of panel device, such as a front panel
 BLADE_EXPANSION_MODULE, 0x0E   Expansion option (BEM) such as PEU, BSE, etc
 CARD_EXPANSION,         0x0F   Expansion card, ie. daughter card
 CARD_HS_EXPANSION,      0x10   High Speed Expansion card, ie. daughter card
 INTERPOSER,             0x11   Interposer device
 CLOCK,                  0x12   Clock card
 MUX,                    0x13   Mulitplexer card
 ADDIN,                  0x14   cKVM card & other addin cards
 STORAGE_MODULE,         0x15   Container of one or more Storage Devices
 SYS_EXPANSION_CARD,     0x16   Management card
 BATTERY,                0x17   A single battery
 BATTERY_MODULE,         0x18   Container of one or more batteries
 REAR_LED,               0x19   Rear LED card
 MEMORY_BANK,            0x1A   Memory banks
 AIR_FILTER,             0x1B   Filter mechanism (bezel)
 SERIAL_PORT_MODULE,     0x1C   Container of one or more serial ports
 PARENT,                 0x1D   Reference to parent for multi-parent support
 PHY_PORT,               0x1E   Physical port
 IO_EXPANDER,            0x1F   RAID card
 CABLE,                  0x20   Cable/Interconnect
 FAN_MUX,                0x29   Fan multiplexer card
  PCI_EXPRESS,            0x32   PCI express card on (PEN)
  FLASH_DIMM,             0x33   Used for SPD devices that matches the silkscreen of the DIMM slot
  RACK,                   0x50   Rack
  PLATFORM,               0x51   Generic Platform like rack mounted server/appliance
  DATAPLEX,               0x52   DataPlex
  OTHER,                  0x53   Other unknown etc.
  PERIPHERAL_MODULE,      0x54 
  SYSTEM_BOARD,           0x55   System board
  PROCESSOR_MODULE,       0x56 
  BACK_PANEL,             0x57 
  POWER_SYSTEM_BOARD,     0x58 
  STORAGE_BACKPLANE,      0x59   Drive back plane
  PROC_BOARD,             0x5A   Holds 1 or more processors
  POWER_DI,               0x5B   Power mgt / power distribution board
  CHASSIS_BACK_PANEL,     0x5C 
  SUB_CHASSIS,            0x5D 
  OTHER_CHASSIS_BOARD,    0x5E 
  DEVICE_MODULE,          0x5F 
  REMOTE_DEVICE,          0x60   Remote mgt communication device
  EXTERNAL_ENVIRONMENT,   0x61   Such as external temp sensor for outside box temps
  PROC_MEMORY_MODULE,     0x62   Processors and memory on same module

Context

MIB
CME-MIB
OID
.1.3.6.1.4.1.2.3.51.2.2.21.22.1.15
Type
column
Access
readonly
Status
mandatory
Parent
inventoryManagementActivityVpdEntry
Table
inventoryManagementActivityVpdTable
Siblings
8

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-100

Related Objects

Sibling Objects