componentIPv4ConfigDHCPEnable
CME-MIB ·
.1.3.6.1.4.1.2.3.51.2.22.32.16.1.1.11
Object
column
mandatory
r/w
Enumeration
IP config method on the component network interface to modify mode to static IP, DHCP and 'try DHCP then try static'. If this network interface doesn't support DHCP, show 'notApplicable(255)'.
Context
- MIB
- CME-MIB
- OID
.1.3.6.1.4.1.2.3.51.2.22.32.16.1.1.11- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- componentIPv4ConfigEntry
- Table
- componentIPv4ConfigTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | useStatic |
1 | useDhcp |
2 | tryDhcpThenTryStatic |
255 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| componentIPv4ConfigTopologyPath mandatory The unique identifier for a component in this table. The chassis and each
installed component is represented by a hardware topology tree, where
each node in the tree represents a … | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.32.16.1.1.1 |
| componentIPv4ConfigVlanId mandatory This is the Virtual LAN ID for supported network
interface cards (NICs). The range of valid VLAN ID's
is 0 to 4095. | column | Integer32 | .1.3.6.1.4.1.2.3.51.2.22.32.16.1.1.10 |
| componentIPv4ConfigMACAddr mandatory Show the component network interface MAC address. If this
network interface doesn't support MAC, show
'notApplicable'. | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.32.16.1.1.12 |
| componentIPv4ConfigPortIndex mandatory The physical port number of the given entry. | column | Integer32 | .1.3.6.1.4.1.2.3.51.2.22.32.16.1.1.2 |
| componentIPv4ConfigName mandatory The name of the component as a null terminated string. | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.32.16.1.1.3 |
| componentIPv4ConfigPortLabel mandatory Show string label that identifies the interface. | column | OctetString | .1.3.6.1.4.1.2.3.51.2.22.32.16.1.1.4 |
| componentIPv4ConfigPhysicalLinkStatus mandatory Indicates whether this network interface port is up or down.
If this network interface doesn't support up/down, show
'notApplicable(255)'. | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.22.32.16.1.1.5 |
| componentIPv4ConfigPhysicalLinkState mandatory Configuration object for requesting the physical port
to be either, down(0), up(1) or loopback(2). To get the
current status of a physical port, use the object,
componentIPv4Confi… | column | Enumeration | .1.3.6.1.4.1.2.3.51.2.22.32.16.1.1.6 |
| componentIPv4ConfigIPAddr mandatory Show/modify current IP address of the component network
interface. Note that only if the
componentIPv4ConfigPhysicalLinkStatus is 'up(1)' and the
componentIPv4ConfigDHCPEnable is… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.22.32.16.1.1.7 |
| componentIPv4ConfigSubnetMask mandatory Show or modifie current subnet mask of the component network
interface. Note that only if the
componentIPv4ConfigPhysicalLinkStatus is 'up(1)' and the
componentIPv4ConfigDHCPEnab… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.22.32.16.1.1.8 |
| componentIPv4ConfigGatewayAddr mandatory Show or modify current IP gateway of the component network
interface. Note that only if the
componentIPv4ConfigPhysicalLinkStatus is 'up(1)' and the
componentIPv4ConfigDHCPEnable… | column | RFC1155-SMIIpAddress | .1.3.6.1.4.1.2.3.51.2.22.32.16.1.1.9 |