cmAuthProtocol
CM-SECURITY-MIB ·
.1.3.6.1.4.1.2544.1.12.10.1.1
Object
scalar
r/w
CmRemoteAuthProtocol
Remote user authentication protocol.
Context
- MIB
- CM-SECURITY-MIB
- OID
.1.3.6.1.4.1.2544.1.12.10.1.1- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cmSecurityObjects
- Siblings
- 16
Syntax
CmRemoteAuthProtocol
- Source
- CmRemoteAuthProtocol
- Base type
Enumeration
Values & Constraints
Type Values
1 | none |
2 | radius |
3 | tacacs |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| f3TacacsPrivLevelControlEnabled This object allows to enable/disable the use of ENABLE authorization
control to determine
the Privilege Level configured by the remote authentication server.
This object is only … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.10.1.10 |
| f3TacacsDefaultPrivLevel This object allows specification of the default privilege level of the
TACACS+ user, when the use of ENABLE authorization control is DISABLED, i.e.
f3TacacsPrivLevelControlEnable… | scalar | CmSecurityPrivLevel | .1.3.6.1.4.1.2544.1.12.10.1.11 |
| f3NasIpv6Addr This object describe the ipv6 address. | scalar | IPV6-TCIpv6Address | .1.3.6.1.4.1.2544.1.12.10.1.12 |
| f3SecurityTrapType This object provides ability to manage whether report security trap. | scalar | SnmpSecurityTrapType | .1.3.6.1.4.1.2544.1.12.10.1.13 |
| f3SecurityTrapInfo This object is used to describe the security trap info.
This object is used only in trap and GET operation on this object
will return empty string. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2544.1.12.10.1.14 |
| f3PrivilegeChangeTable This table is used for Restricted User Login via NMS.
This is for users with lower privileges to elevate them to higher ones for limited amount of time. | table | - | .1.3.6.1.4.1.2544.1.12.10.1.15 |
| f3UserPrivMgmtControl This object is used to enable/disable User Privilege Management. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.10.1.16 |
| f3UserPrivRspTimeout This object is used to set response timeout for user privilege
upgrade request in minutes. | scalar | minutes Integer32 | .1.3.6.1.4.1.2544.1.12.10.1.17 |
| cmAccessOrder Order of access for security, i.e. try 'local' first or
'remote' first. | scalar | CmSecurityAccessOrder | .1.3.6.1.4.1.2544.1.12.10.1.2 |
| cmAuthType In case of remote authentication, the chosen protocol. | scalar | CmSecurityAuthType | .1.3.6.1.4.1.2544.1.12.10.1.3 |
| cmNASIpAddress In case of remote authentication RADIUS,
the Network Access Server's IP Address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.12.10.1.4 |
| cmSecurityUserTable A list of entries corresponding to the security users.
Entries cannot be created in this table by management
application action. | table | - | .1.3.6.1.4.1.2544.1.12.10.1.5 |
| cmRemoteAuthServerTable A list of entries corresponding to the remote authentication
servers.
Entries cannot be created in this table by management
application action. | table | - | .1.3.6.1.4.1.2544.1.12.10.1.6 |
| cmSecurityPolicyStrength This object represents the security policy
strength of the system. Based on this value,
the system puts additional restrictions on
the user id and password rules. | scalar | CmSecurityPolicyStrength | .1.3.6.1.4.1.2544.1.12.10.1.7 |
| cmRemoteAuthServerAccountingEnabled This object allows to enable/disable RADIUS Accounting
on all authentication servers. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.10.1.8 |
| f3UsmUserTable This table is the extension of the F3 USM User Table. | table | - | .1.3.6.1.4.1.2544.1.12.10.1.9 |