esaProbeStatsY1731RxLmSamples

CM-SA-MIB · .1.3.6.1.4.1.2544.1.12.8.1.7.1.56
MIB view Table view

Object

column SNMPv2-TCTruthValue 
This attribute is only applicable to Y.1731 probes. This flag
indicates that at least one loss measurement sample was received
for this bin period (LMRs received). This is used by the user
to differentiate between valid zero frame loss and not receiving
any LMRs.

Context

MIB
CM-SA-MIB
OID
.1.3.6.1.4.1.2544.1.12.8.1.7.1.56
Type
column
Access
readonly
Status
current
Parent
esaProbeStatsEntry
Table
esaProbeStatsTable
Siblings
70

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration

Values & Constraints

Type Values
1true
2false

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
esaProbeStatsDestinationIndex
An integer index value used to uniquely identify a destination (Reflector) Index, in a point-to-multi point SLA. For Release 4.1 GE206, this value is 1, since only point-to-point…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.8.1.7.1.1
esaProbeStatsP2RSyncErrs
The number of (time) Synchronization Errors from probe to reflector in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.10
esaProbeStatsP2RLostPkts
The number of Lost Pkts from probe to reflector in the current interval. For Y.1731 probes, these are the actual data frames lost.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.11
esaProbeStatsR2PPkts
The total number of Received Packets in the current interval. In the case of Y.1731 probes, this reflects the number of DMRs (Delay Measurement Replies) received and this will alw…
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.12
esaProbeStatsR2PErredPkts
The total number of Received Packets in the current interval, which had errors such as length of received packet is less than the protocol header length, packet was received after…
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.13
esaProbeStatsR2PSyncErrs
The number of (time) Synchronization Errors from reflector to probe in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.14
esaProbeStatsR2PLostPkts
The number of Lost Pkts from reflector to probe in the current interval. For Y.1731 probes, these are the actual data frames lost.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.15
esaProbeStatsLostPkts
The total number of Lost Packets in the current interval. Packets which are not received from the reflector end beyond the configured timeout value are termed as lost. NOTE: This …
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.16
esaProbeStatsSeqGaps
The total number of sequence gaps across all packets received in the current interval. If (Received Seq Number) is greater than or equal to (Last Received Seq Number + 2)) it is t…
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.17
esaProbeStatsOutOfSeqErrs
The total number of out of sequence errors across all packets received in the current interval. If (Received Seq Number) is less than or equal to (Last Received Seq Number), it is…
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.18
esaProbeStatsMinRoundTripDelay
The minimum round-trip delay(in microseconds) across all packets received in the current interval. The reflector's processing time is excluded from the value.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.19
esaProbeStatsCOSIndex
An integer index value used to uniquely identify SLA for a specific Class of Service. For Release 4.1 GE206, this value is 1, since the COS is explicitly specified in the Probe p…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2544.1.12.8.1.7.1.2
esaProbeStatsMaxRoundTripDelay
The maximum round-trip delay(in microseconds) across all packets received in the current interval. The reflector's processing time is excluded from the value.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.20
esaProbeStatsAvgRoundTripDelay
The average round-trip delay(in microseconds) across all packets received in the current interval. The reflector's processing time is excluded from the value.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.21
esaProbeStatsSumRoundTripDelay
The total sum of round trip delay(in microseconds) in the current interval. The reflector's processing time is excluded from the value.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.22
esaProbeStatsSumOfSqRoundTripDelay
The sum of square of round trip delays in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.23
esaProbeStatsMinOnewayP2RDelay
The minimum one-way source to destination delay(in microseconds) across all packets received in the current interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.24
esaProbeStatsMaxOnewayP2RDelay
The maximum one-way source to destination delay(in microseconds) across all packets received in the current interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.25
esaProbeStatsAvgOnewayP2RDelay
The average one-way source to destination delay(in microseconds) across all packets received in the current interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.26
esaProbeStatsSumOnewayP2RDelay
The total sum of one-way delay from source to destination in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.27
esaProbeStatsSumOfSqOnewayP2RDelay
The sum of square of one-way delay from source to destination in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.28
esaProbeStatsMinOnewayR2PDelay
The minimum one-way destination to source delay(in microseconds) across all packets received in the current interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.29
esaProbeStatsIndex
An arbitrary integer index value used to uniquely identify this ESA Probe statistics entry. Index 1 corresponds to current and index 2 to rollover.
columnInteger32.1.3.6.1.4.1.2544.1.12.8.1.7.1.3
esaProbeStatsMaxOnewayR2PDelay
The maximum one-way destination to source delay(in microseconds) across all packets received in the current interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.30
esaProbeStatsAvgOnewayR2PDelay
The average one-way destination to source delay(in microseconds) across all packets received in the current interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.31
esaProbeStatsSumOnewayR2PDelay
The total sum of one-way delay from destination to source in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.32
esaProbeStatsSumOfSqOnewayR2PDelay
The sum of square of one-way delay from destination to source in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.33
esaProbeStatsMinPosP2RJitter
The minimum positive one-way jitter from source to destination in the current interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.34
esaProbeStatsMaxPosP2RJitter
The maximum positive one-way jitter from source to destination in the current interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.35
esaProbeStatsNumPosP2RJitter
The total number of positive one-way jitters from source to destination in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.36
esaProbeStatsSumPosP2RJitter
The total sum of positive one-way jitters from source to destination in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.37
esaProbeStatsSumOfSqPosP2RJitter
The sum of square of positive one-way jitters from source to destination in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.38
esaProbeStatsMinNegP2RJitter
The minimum negative one-way jitter from source to destination in the current interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.39
esaProbeStatsIntervalType
Indicates the type of collection, i.e. whether it is current, or rollover.
columnEsaProbePmIntervalType.1.3.6.1.4.1.2544.1.12.8.1.7.1.4
esaProbeStatsMaxNegP2RJitter
The maximum negative one-way jitter from source to destination in the current interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.40
esaProbeStatsNumNegP2RJitter
The total number of negative one-way jitters from source to destination in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.41
esaProbeStatsSumNegP2RJitter
The total sum of negative one-way jitters from source to destination in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.42
esaProbeStatsSumOfSqNegP2RJitter
The sum of square of negative one-way jitters from source to destination in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.43
esaProbeStatsMinPosR2PJitter
The minimum positive one-way jitter from destination to source in the current interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.44
esaProbeStatsMaxPosR2PJitter
The maximum positive one-way jitter from destination to source in the current interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.45
esaProbeStatsNumPosR2PJitter
The total number of positive one-way jitters from destination to source in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.46
esaProbeStatsSumPosR2PJitter
The total sum of positive one-way jitters from destination to source in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.47
esaProbeStatsSumOfSqPosR2PJitter
The sum of square of positive one-way jitters from destination to source in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.48
esaProbeStatsMinNegR2PJitter
The minimum negative one-way jitter from destination to source in the current interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.49
esaProbeStatsCOS
The Class of Service. For Release 4.1 GE206, this value is cos-not-applicable, since multi COS SLA is not supported.
columnCM-COMMON-MIBClassOfServiceType.1.3.6.1.4.1.2544.1.12.8.1.7.1.5
esaProbeStatsMaxNegR2PJitter
The maximum negative one-way jitter from destination to source in the current interval.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.50
esaProbeStatsNumNegR2PJitter
The total number of negative one-way jitters from destination to source in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.51
esaProbeStatsSumNegR2PJitter
The total sum of negative one-way jitters from destination to source in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.52
esaProbeStatsSumOfSqNegR2PJitter
The sum of square of negative one-way jitters from destination to source in the current interval.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.53
esaProbeStatsY1731P2RNegLossOccurrences
This attribute is only applicable to Y.1731 probes. This is the number of occurences of negative frame loss from Source MEP (Probe) to Destination MEP (Reflector). If these counts…
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.54
esaProbeStatsY1731R2PNegLossOccurrences
This attribute is only applicable to Y.1731 probes. This is the number of occurences of negative frame loss from to Destination MEP (Reflector) to Source MEP (Probe). If these cou…
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.55
esaProbeStatsY1731RxDmSamples
This attribute is only applicable to Y.1731 probes. This flag indicates that at least one delay measurement sample was received for this bin period (DMRs received).
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.8.1.7.1.57
esaProbeStatsY1731P2RFrames
This attribute is only applicable to Y.1731 probes. This is the number of data frames counted by the Source MEP (Probe) that are transmitted towards the Destination MEP (Reflector…
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.58
esaProbeStatsY1731R2PFrames
This attribute is only applicable to Y.1731 probes. This is the number of data frames counted by the Destination MEP (Reflector) that are transmitted towards the Source MEP (Probe…
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.59
esaProbeStatsValid
Indicates the validity of the bin.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2544.1.12.8.1.7.1.6
esaProbeStatsAvgAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the average absolute P2R Jitter value. .
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.60
esaProbeStatsAvgAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the average absolute R2P Jitter value. .
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.61
esaProbeStatsMinAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the minimum absolute P2R Jitter value. .
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.62
esaProbeStatsMinAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the minimum absolute R2P Jitter value. .
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.63
esaProbeStatsMaxAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the maximum absolute P2R Jitter value. .
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.64
esaProbeStatsMaxAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the maximum absolute R2P Jitter value. .
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2544.1.12.8.1.7.1.65
esaProbeStatsNumAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the number of absolute P2R Jitters.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.66
esaProbeStatsNumAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the number of absolute R2P Jitters.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.67
esaProbeStatsSumAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the sum of absolute P2R Jitter values.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.68
esaProbeStatsSumAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the sum of absolute R2P Jitter values.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.69
esaProbeStatsAction
Allows the Manager to clear the bin.
columnCM-COMMON-MIBCmPmBinAction.1.3.6.1.4.1.2544.1.12.8.1.7.1.7
esaProbeStatsSumOfSqAbsP2RJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the sum of squares of absolute P2R Jitter values.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.70
esaProbeStatsSumOfSqAbsR2PJitter
This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes. This is the sum of squares of absolute R2P Jitter values.
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.71
esaProbeStatsP2RPkts
The total number of Transmitted Packets in the current interval. In the case of Y.1731 probes, this reflects the number of DMRs (Delay Measurement Replies) received and this will …
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.8
esaProbeStatsP2RErredPkts
The total number of Packets in the current interval, for which there was a problem in transmission. This error is counted when there is a failure in packet transmission due to re…
columnCM-COMMON-MIBPerfCounter64.1.3.6.1.4.1.2544.1.12.8.1.7.1.9