esaProbeStatsIntervalType
CM-SA-MIB ·
.1.3.6.1.4.1.2544.1.12.8.1.7.1.4
Object
column
EsaProbePmIntervalType
Indicates the type of collection, i.e. whether it is current, or rollover.
Context
- MIB
- CM-SA-MIB
- OID
.1.3.6.1.4.1.2544.1.12.8.1.7.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- esaProbeStatsEntry
- Table
- esaProbeStatsTable
- Siblings
- 70
Syntax
EsaProbePmIntervalType
- Source
- EsaProbePmIntervalType
- Base type
Enumeration
Values & Constraints
Type Values
1 | current |
2 | rollover |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| esaProbeStatsDestinationIndex An integer index value used to uniquely identify
a destination (Reflector) Index, in a point-to-multi point SLA.
For Release 4.1 GE206, this value is 1, since only point-to-point… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.1 |
| esaProbeStatsP2RSyncErrs The number of (time) Synchronization Errors from probe to reflector
in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.10 |
| esaProbeStatsP2RLostPkts The number of Lost Pkts from probe to reflector in the current interval.
For Y.1731 probes, these are the actual data frames lost. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.11 |
| esaProbeStatsR2PPkts The total number of Received Packets in the current interval.
In the case of Y.1731 probes, this reflects the number of DMRs
(Delay Measurement Replies) received and this will alw… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.12 |
| esaProbeStatsR2PErredPkts The total number of Received Packets in the current interval,
which had errors such as length of received packet is less than
the protocol header length, packet was received after… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.13 |
| esaProbeStatsR2PSyncErrs The number of (time) Synchronization Errors from reflector to probe
in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.14 |
| esaProbeStatsR2PLostPkts The number of Lost Pkts from reflector to probe in the current interval.
For Y.1731 probes, these are the actual data frames lost. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.15 |
| esaProbeStatsLostPkts The total number of Lost Packets in the current interval.
Packets which are not received from the reflector end beyond
the configured timeout value are termed as lost.
NOTE: This … | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.16 |
| esaProbeStatsSeqGaps The total number of sequence gaps across all
packets received in the current interval. If (Received Seq Number)
is greater than or equal to (Last Received Seq Number + 2))
it is t… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.17 |
| esaProbeStatsOutOfSeqErrs The total number of out of sequence errors across all
packets received in the current interval. If (Received Seq Number)
is less than or equal to (Last Received Seq Number),
it is… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.18 |
| esaProbeStatsMinRoundTripDelay The minimum round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.19 |
| esaProbeStatsCOSIndex An integer index value used to uniquely identify
SLA for a specific Class of Service.
For Release 4.1 GE206, this value is 1, since the COS
is explicitly specified in the Probe p… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.2 |
| esaProbeStatsMaxRoundTripDelay The maximum round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.20 |
| esaProbeStatsAvgRoundTripDelay The average round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.21 |
| esaProbeStatsSumRoundTripDelay The total sum of round trip delay(in microseconds)
in the current interval.
The reflector's processing time is excluded from the value. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.22 |
| esaProbeStatsSumOfSqRoundTripDelay The sum of square of round trip delays in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.23 |
| esaProbeStatsMinOnewayP2RDelay The minimum one-way source to destination delay(in microseconds)
across all packets received in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.24 |
| esaProbeStatsMaxOnewayP2RDelay The maximum one-way source to destination delay(in microseconds)
across all packets received in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.25 |
| esaProbeStatsAvgOnewayP2RDelay The average one-way source to destination delay(in microseconds)
across all packets received in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.26 |
| esaProbeStatsSumOnewayP2RDelay The total sum of one-way delay from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.27 |
| esaProbeStatsSumOfSqOnewayP2RDelay The sum of square of one-way delay from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.28 |
| esaProbeStatsMinOnewayR2PDelay The minimum one-way destination to source delay(in microseconds)
across all packets received in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.29 |
| esaProbeStatsIndex An arbitrary integer index value used to uniquely identify
this ESA Probe statistics entry.
Index 1 corresponds to current and index 2 to rollover. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.3 |
| esaProbeStatsMaxOnewayR2PDelay The maximum one-way destination to source delay(in microseconds)
across all packets received in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.30 |
| esaProbeStatsAvgOnewayR2PDelay The average one-way destination to source delay(in microseconds)
across all packets received in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.31 |
| esaProbeStatsSumOnewayR2PDelay The total sum of one-way delay from destination to source
in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.32 |
| esaProbeStatsSumOfSqOnewayR2PDelay The sum of square of one-way delay from destination to source
in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.33 |
| esaProbeStatsMinPosP2RJitter The minimum positive one-way jitter from source to
destination in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.34 |
| esaProbeStatsMaxPosP2RJitter The maximum positive one-way jitter from source to
destination in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.35 |
| esaProbeStatsNumPosP2RJitter The total number of positive one-way jitters from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.36 |
| esaProbeStatsSumPosP2RJitter The total sum of positive one-way jitters from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.37 |
| esaProbeStatsSumOfSqPosP2RJitter The sum of square of positive one-way jitters from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.38 |
| esaProbeStatsMinNegP2RJitter The minimum negative one-way jitter from source to
destination in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.39 |
| esaProbeStatsMaxNegP2RJitter The maximum negative one-way jitter from source to
destination in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.40 |
| esaProbeStatsNumNegP2RJitter The total number of negative one-way jitters from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.41 |
| esaProbeStatsSumNegP2RJitter The total sum of negative one-way jitters from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.42 |
| esaProbeStatsSumOfSqNegP2RJitter The sum of square of negative one-way jitters from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.43 |
| esaProbeStatsMinPosR2PJitter The minimum positive one-way jitter from destination to source
in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.44 |
| esaProbeStatsMaxPosR2PJitter The maximum positive one-way jitter from destination to
source in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.45 |
| esaProbeStatsNumPosR2PJitter The total number of positive one-way jitters from destination to
source in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.46 |
| esaProbeStatsSumPosR2PJitter The total sum of positive one-way jitters from destination to
source in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.47 |
| esaProbeStatsSumOfSqPosR2PJitter The sum of square of positive one-way jitters from destination to
source in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.48 |
| esaProbeStatsMinNegR2PJitter The minimum negative one-way jitter from destination to source
in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.49 |
| esaProbeStatsCOS The Class of Service.
For Release 4.1 GE206, this value is cos-not-applicable, since
multi COS SLA is not supported. | column | CM-COMMON-MIBClassOfServiceType | .1.3.6.1.4.1.2544.1.12.8.1.7.1.5 |
| esaProbeStatsMaxNegR2PJitter The maximum negative one-way jitter from destination to
source in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.50 |
| esaProbeStatsNumNegR2PJitter The total number of negative one-way jitters from destination to
source in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.51 |
| esaProbeStatsSumNegR2PJitter The total sum of negative one-way jitters from destination to
source in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.52 |
| esaProbeStatsSumOfSqNegR2PJitter The sum of square of negative one-way jitters from destination to
source in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.53 |
| esaProbeStatsY1731P2RNegLossOccurrences This attribute is only applicable to Y.1731 probes. This is the
number of occurences of negative frame loss from Source MEP (Probe)
to Destination MEP (Reflector). If these counts… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.54 |
| esaProbeStatsY1731R2PNegLossOccurrences This attribute is only applicable to Y.1731 probes. This is the
number of occurences of negative frame loss from to Destination MEP
(Reflector) to Source MEP (Probe). If these cou… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.55 |
| esaProbeStatsY1731RxLmSamples This attribute is only applicable to Y.1731 probes. This flag
indicates that at least one loss measurement sample was received
for this bin period (LMRs received). This is used by… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.8.1.7.1.56 |
| esaProbeStatsY1731RxDmSamples This attribute is only applicable to Y.1731 probes. This flag
indicates that at least one delay measurement sample was received
for this bin period (DMRs received). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.8.1.7.1.57 |
| esaProbeStatsY1731P2RFrames This attribute is only applicable to Y.1731 probes. This is the
number of data frames counted by the Source MEP (Probe) that
are transmitted towards the Destination MEP (Reflector… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.58 |
| esaProbeStatsY1731R2PFrames This attribute is only applicable to Y.1731 probes. This is the
number of data frames counted by the Destination MEP (Reflector)
that are transmitted towards the Source MEP (Probe… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.59 |
| esaProbeStatsValid Indicates the validity of the bin. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.8.1.7.1.6 |
| esaProbeStatsAvgAbsP2RJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the average absolute P2R Jitter value.
. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.60 |
| esaProbeStatsAvgAbsR2PJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the average absolute R2P Jitter value.
. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.61 |
| esaProbeStatsMinAbsP2RJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the minimum absolute P2R Jitter value.
. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.62 |
| esaProbeStatsMinAbsR2PJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the minimum absolute R2P Jitter value.
. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.63 |
| esaProbeStatsMaxAbsP2RJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the maximum absolute P2R Jitter value.
. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.64 |
| esaProbeStatsMaxAbsR2PJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the maximum absolute R2P Jitter value.
. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.65 |
| esaProbeStatsNumAbsP2RJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the number of absolute P2R Jitters. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.66 |
| esaProbeStatsNumAbsR2PJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the number of absolute R2P Jitters. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.67 |
| esaProbeStatsSumAbsP2RJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of absolute P2R Jitter values. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.68 |
| esaProbeStatsSumAbsR2PJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of absolute R2P Jitter values. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.69 |
| esaProbeStatsAction Allows the Manager to clear the bin. | column | CM-COMMON-MIBCmPmBinAction | .1.3.6.1.4.1.2544.1.12.8.1.7.1.7 |
| esaProbeStatsSumOfSqAbsP2RJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of squares of absolute P2R Jitter values. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.70 |
| esaProbeStatsSumOfSqAbsR2PJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of squares of absolute R2P Jitter values. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.71 |
| esaProbeStatsP2RPkts The total number of Transmitted Packets in the current interval.
In the case of Y.1731 probes, this reflects the number of DMRs
(Delay Measurement Replies) received and this will … | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.8 |
| esaProbeStatsP2RErredPkts The total number of Packets in the current interval, for which
there was a problem in transmission. This error is counted
when there is a failure in packet transmission due to re… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.7.1.9 |