esaProbeHistoryMaxRoundTripDelay
CM-SA-MIB ·
.1.3.6.1.4.1.2544.1.12.8.1.8.1.20
Object
column
SNMPv2-SMIUnsigned32
The maximum round-trip delay(in microseconds) across all packets received in the current interval. The reflector's processing time is excluded from the value.
Context
- MIB
- CM-SA-MIB
- OID
.1.3.6.1.4.1.2544.1.12.8.1.8.1.20- Type
- column
- Access
- readonly
- Status
- current
- Parent
- esaProbeHistoryEntry
- Table
- esaProbeHistoryTable
- Siblings
- 70
Syntax
SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| esaProbeHistoryDestinationIndex An integer index value used to uniquely identify
a destination (Reflector) Index, in a point-to-multi point SLA.
For Release 4.1 GE206, this value is 1, since only point-to-point… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.1 |
| esaProbeHistoryP2RSyncErrs The number of (time) Synchronization Errors from probe to reflector
in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.10 |
| esaProbeHistoryP2RLostPkts The number of Lost Pkts from probe to reflector in the current interval.
For Y.1731 probes, these are the actual data frames lost. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.11 |
| esaProbeHistoryR2PPkts The total number of Received Packets in the current interval.
In the case of Y.1731 probes, this reflects the number of DMRs
(Delay Measurement Replies) received and this will alw… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.12 |
| esaProbeHistoryR2PErredPkts The total number of Received Packets in the current interval,
which had errors such as length of received packet is less than
the protocol header length, packet was received after… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.13 |
| esaProbeHistoryR2PSyncErrs The number of (time) Synchronization Errors from reflector to probe
in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.14 |
| esaProbeHistoryR2PLostPkts The number of Lost Pkts from reflector to probe in the current interval.
For Y.1731 probes, these are the actual data frames lost. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.15 |
| esaProbeHistoryLostPkts The total number of Lost Packets in the current interval.
Packets which are not received from the reflector end beyond
the configured timeout value are termed as lost.
NOTE: This … | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.16 |
| esaProbeHistorySeqGaps The total number of sequence gaps across all
packets received in the current interval. If (Received Seq Number)
is greater than or equal to (Last Received Seq Number + 2))
it is t… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.17 |
| esaProbeHistoryOutOfSeqErrs The total number of out of sequence errors across all
packets received in the current interval. If (Received Seq Number)
is less than or equal to (Last Received Seq Number),
it is… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.18 |
| esaProbeHistoryMinRoundTripDelay The minimum round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.19 |
| esaProbeHistoryCOSIndex An integer index value used to uniquely identify
SLA for a specific Class of Service.
For Release 4.1 GE206, this value is 1, since the COS
is explicitly specified in the Probe p… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.2 |
| esaProbeHistoryAvgRoundTripDelay The average round-trip delay(in microseconds) across all
packets received in the current interval.
The reflector's processing time is excluded from the value. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.21 |
| esaProbeHistorySumRoundTripDelay The total sum of round trip delay(in microseconds)
in the current interval.
The reflector's processing time is excluded from the value. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.22 |
| esaProbeHistorySumOfSqRoundTripDelay The sum of square of round trip delays in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.23 |
| esaProbeHistoryMinOnewayP2RDelay The minimum one-way source to destination delay(in microseconds)
across all packets received in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.24 |
| esaProbeHistoryMaxOnewayP2RDelay The maximum one-way source to destination delay(in microseconds)
across all packets received in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.25 |
| esaProbeHistoryAvgOnewayP2RDelay The average one-way source to destination delay(in microseconds)
across all packets received in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.26 |
| esaProbeHistorySumOnewayP2RDelay The total sum of one-way delay from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.27 |
| esaProbeHistorySumOfSqOnewayP2RDelay The sum of square of one-way delay from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.28 |
| esaProbeHistoryMinOnewayR2PDelay The minimum one-way destination to source delay(in microseconds)
across all packets received in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.29 |
| esaProbeHistoryIndex An arbitrary integer index value used to uniquely identify
this ESA Probe statistics history entry. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.3 |
| esaProbeHistoryMaxOnewayR2PDelay The maximum one-way destination to source delay(in microseconds)
across all packets received in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.30 |
| esaProbeHistoryAvgOnewayR2PDelay The average one-way destination to source delay(in microseconds)
across all packets received in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.31 |
| esaProbeHistorySumOnewayR2PDelay The total sum of one-way delay from destination to source
in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.32 |
| esaProbeHistorySumOfSqOnewayR2PDelay The sum of square of one-way delay from destination to source
in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.33 |
| esaProbeHistoryMinPosP2RJitter The minimum positive one-way jitter from source to
destination in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.34 |
| esaProbeHistoryMaxPosP2RJitter The maximum positive one-way jitter from source to
destination in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.35 |
| esaProbeHistoryNumPosP2RJitter The total number of positive one-way jitters from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.36 |
| esaProbeHistorySumPosP2RJitter The total sum of positive one-way jitters from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.37 |
| esaProbeHistorySumOfSqPosP2RJitter The sum of square of positive one-way jitters from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.38 |
| esaProbeHistoryMinNegP2RJitter The minimum negative one-way jitter from source to
destination in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.39 |
| esaProbeHistoryTime Indicates the time of history bin creation. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2544.1.12.8.1.8.1.4 |
| esaProbeHistoryMaxNegP2RJitter The maximum negative one-way jitter from source to
destination in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.40 |
| esaProbeHistoryNumNegP2RJitter The total number of negative one-way jitters from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.41 |
| esaProbeHistorySumNegP2RJitter The total sum of negative one-way jitters from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.42 |
| esaProbeHistorySumOfSqNegP2RJitter The sum of square of negative one-way jitters from source to
destination in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.43 |
| esaProbeHistoryMinPosR2PJitter The minimum positive one-way jitter from destination to source
in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.44 |
| esaProbeHistoryMaxPosR2PJitter The maximum positive one-way jitter from destination to
source in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.45 |
| esaProbeHistoryNumPosR2PJitter The total number of positive one-way jitters from destination to
source in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.46 |
| esaProbeHistorySumPosR2PJitter The total sum of positive one-way jitters from destination to
source in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.47 |
| esaProbeHistorySumOfSqPosR2PJitter The sum of square of positive one-way jitters from destination to
source in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.48 |
| esaProbeHistoryMinNegR2PJitter The minimum negative one-way jitter from destination to source
in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.49 |
| esaProbeHistoryValid Indicates the validity of the bin. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.8.1.8.1.5 |
| esaProbeHistoryMaxNegR2PJitter The maximum negative one-way jitter from destination to
source in the current interval. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.50 |
| esaProbeHistoryNumNegR2PJitter The total number of negative one-way jitters from destination to
source in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.51 |
| esaProbeHistorySumNegR2PJitter The total sum of negative one-way jitters from destination to
source in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.52 |
| esaProbeHistorySumOfSqNegR2PJitter The sum of square of negative one-way jitters from destination to
source in the current interval. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.53 |
| esaProbeHistoryY1731P2RNegLossOccurrences This attribute is only applicable to Y.1731 probes. This is the
number of occurences of negative frame loss from Source MEP (Probe)
to Destination MEP (Reflector). If these counts… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.54 |
| esaProbeHistoryY1731R2PNegLossOccurrences This attribute is only applicable to Y.1731 probes. This is the
number of occurences of negative frame loss from to Destination MEP
(Reflector) to Source MEP (Probe). If these cou… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.55 |
| esaProbeHistoryY1731RxLmSamples This attribute is only applicable to Y.1731 probes. This flag
indicates that at least one loss measurement sample was received
for this bin period (LMRs received). This is used by… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.8.1.8.1.56 |
| esaProbeHistoryY1731RxDmSamples This attribute is only applicable to Y.1731 probes. This flag
indicates that at least one delay measurement sample was received
for this bin period (DMRs received). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.8.1.8.1.57 |
| esaProbeHistoryY1731P2RFrames This attribute is only applicable to Y.1731 probes. This is the
number of data frames counted by the Source MEP (Probe) that
are transmitted towards the Destination MEP (Reflector… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.58 |
| esaProbeHistoryY1731R2PFrames This attribute is only applicable to Y.1731 probes. This is the
number of data frames counted by the Destination MEP (Reflector)
that are transmitted towards the Source MEP (Probe… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.59 |
| esaProbeHistoryAction Allows the Manager to clear the bin. | column | CM-COMMON-MIBCmPmBinAction | .1.3.6.1.4.1.2544.1.12.8.1.8.1.6 |
| esaProbeHistoryAvgAbsP2RJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the average absolute P2R Jitter value.
. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.60 |
| esaProbeHistoryAvgAbsR2PJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the average absolute R2P Jitter value.
. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.61 |
| esaProbeHistoryMinAbsP2RJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the minimum absolute P2R Jitter value.
. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.62 |
| esaProbeHistoryMinAbsR2PJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the minimum absolute R2P Jitter value.
. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.63 |
| esaProbeHistoryMaxAbsP2RJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the maximum absolute P2R Jitter value.
. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.64 |
| esaProbeHistoryMaxAbsR2PJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the maximum absolute R2P Jitter value.
. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.65 |
| esaProbeHistoryNumAbsP2RJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the number of absolute P2R Jitters. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.66 |
| esaProbeHistoryNumAbsR2PJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the number of absolute R2P Jitters. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.67 |
| esaProbeHistorySumAbsP2RJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of absolute P2R Jitter values. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.68 |
| esaProbeHistorySumAbsR2PJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of absolute R2P Jitter values. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.69 |
| esaProbeHistoryCOS The Class of Service.
For Release 4.1 GE206, this value is cos-not-applicable, since
multi COS SLA is not supported. | column | CM-COMMON-MIBClassOfServiceType | .1.3.6.1.4.1.2544.1.12.8.1.8.1.7 |
| esaProbeHistorySumOfSqAbsP2RJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of squares of absolute P2R Jitter values. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.70 |
| esaProbeHistorySumOfSqAbsR2PJitter This attribute is only applicable to Layer 3 ICMP Timestamp and Layer 2 Y.1731 probes.
This is the sum of squares of absolute R2P Jitter values. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.71 |
| esaProbeHistoryP2RPkts The total number of Transmitted Packets in the current interval.
In the case of Y.1731 probes, this reflects the number of DMRs
(Delay Measurement Replies) received and this will … | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.8 |
| esaProbeHistoryP2RErredPkts The total number of Packets in the current interval, for which
there was a problem in transmission. This error is counted
when there is a failure in packet transmission due to re… | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.8.1.9 |