ecpaTestStreamOuterVlanId
CM-SA-MIB ·
.1.3.6.1.4.1.2544.1.12.8.1.3.1.11
Object
Outer VLAN Id associated with the ECPA stream. Valid only if ecpaTestStreamOuterVlanEnabled is enabled.
Context
- MIB
- CM-SA-MIB
- OID
.1.3.6.1.4.1.2544.1.12.8.1.3.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ecpaTestStreamEntry
- Table
- ecpaTestStreamTable
- Siblings
- 53
Syntax
CM-COMMON-MIBVlanId
- Source
- CM-COMMON-MIBVlanId
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..4095
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ecpaTestStreamIndex An integer index value corresponding to the stream index
for which the ECPA test was initiated. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.1 |
| ecpaTestStreamOuterVlanEnabled Allows specification of a VLAN tagged ECPA stream. This variable
enables the outer VLAN specification, in the case of a
doubly tagged ECPA stream. If a singly tagged ECPA stream… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.8.1.3.1.10 |
| ecpaTestStreamOuterVlanPrio Outer VLAN Priority associated with the ECPA stream. Valid only
if ecpaTestStreamOuterVlanEnabled is enabled. | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.8.1.3.1.12 |
| ecpaTestStreamOuterVlanEtherType EtherType associated with the Outer VLAN Tag. Valid only
if ecpaTestStreamOuterVlanEnabled is enabled. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.13 |
| ecpaTestStreamInnerVlanEnabled Allows specification of a VLAN tagged ECPA stream. This variable
enables the outer VLAN specification, in the case of a
doubly tagged ECPA stream. If a singly tagged ECPA stream… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.8.1.3.1.14 |
| ecpaTestStreamInnerVlanId Inner VLAN Id associated with the ECPA stream. Valid only
if ecpaTestStreamInnerVlanEnabled is enabled. | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.8.1.3.1.15 |
| ecpaTestStreamInnerVlanPrio Inner VLAN Priority associated with the ECPA stream. Valid only
if ecpaTestStreamInnerVlanEnabled is enabled. | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.8.1.3.1.16 |
| ecpaTestStreamInnerVlanEtherType EtherType associated with the Inner VLAN Tag. Valid only
if ecpaTestStreamInnerVlanEnabled is enabled. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.17 |
| ecpaTestStreamIpVersion This object enables specification of IP data in the generated
test traffic. Value of `ipv4' allows test data to be
IP v4 compatible.
Value of `ipv6' allows test data to be IP v… | column | CM-COMMON-MIBIpVersion | .1.3.6.1.4.1.2544.1.12.8.1.3.1.18 |
| ecpaTestStreamIpV4Address This object enables specification of ipv4 IP Address for
the test stream.This is used when ecpaTestStreamIpVersion is ipv4. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.12.8.1.3.1.19 |
| ecpaTestStreamSourcePort An integer index value corresponding to the ifIndex
for which the ECPA test was initiated. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.8.1.3.1.2 |
| ecpaTestStreamIpV6Address This object enables specification of ipv6 IP Address for
the test stream.This is used when ecpaTestStreamIpVersion is ipv6. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2544.1.12.8.1.3.1.20 |
| ecpaTestStreamPrioMapMode This object enables specification of Priority Mapping Mode for
the test stream. | column | CM-COMMON-MIBIpPriorityMapMode | .1.3.6.1.4.1.2544.1.12.8.1.3.1.21 |
| ecpaTestStreamPrioVal This object enables specification of Priority Value for
ecpaTestStreamPrioMapMode as TOS/DSCP. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.22 |
| ecpaTestStreamMonStartTime The start time of the ECPA test for this stream. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2544.1.12.8.1.3.1.23 |
| ecpaTestStreamMonEndTime The end time of the ECPA test for this stream. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2544.1.12.8.1.3.1.24 |
| ecpaTestStreamMonElapsedTime The elapsed time of ECPA test for this stream in seconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.25 |
| ecpaTestStreamMonTxFrames The total number of frames transmitted(generated) so far.
This object does not exist if the ecpaControlTestStatus indicates
initial state. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.26 |
| ecpaTestStreamMonRxFrames The total number of frames received so far.
This object does not exist if the ecpaControlTestStatus indicates
initial state. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.27 |
| ecpaTestStreamMonRxPercentSuccess Received frames as a percentage of transmitted frames.
This object does not exist if the ecpaControlTestStatus indicates
initial state. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.28 |
| ecpaTestStreamMonRxOutOfSeqErrs The total number of out of sequence errors received so far.
This object does not exist if the ecpaControlTestStatus indicates
initial state. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.29 |
| ecpaTestStreamName Symbolic Stream Name that can be associated with an ECPA stream. | column | OctetString | .1.3.6.1.4.1.2544.1.12.8.1.3.1.3 |
| ecpaTestStreamMonRxSeqGaps The total number of sequence gaps received so far.
This object does not exist if the ecpaControlTestStatus indicates
initial state. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.30 |
| ecpaTestStreamMonRxNonEcpaFrames The total number of non ECPA frames received during the execution. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.31 |
| ecpaTestStreamMonRxMinDelay The minimum delay (in microseconds) across all frames
received so far. This object does not exist if the
ecpaControlTestStatus indicates initial state. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.32 |
| ecpaTestStreamMonRxMaxDelay The maximum delay (in microseconds) across all frames
received so far. This object does not exist if the
ecpaControlTestStatus indicates initial state. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.33 |
| ecpaTestStreamMonRxAvgDelay The average delay (in microseconds) across all frames
received so far. This object does not exist if the
ecpaControlTestStatus indicates initial state. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.34 |
| ecpaTestStreamMonRx1stFrameSize Frame size of the Monitored First Frame. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.35 |
| ecpaTestStreamMonRx1stFrame1Octets The frame contents of the first received frame - first 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state. | column | OctetString | .1.3.6.1.4.1.2544.1.12.8.1.3.1.36 |
| ecpaTestStreamMonRx1stFrame2Octets The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state. | column | OctetString | .1.3.6.1.4.1.2544.1.12.8.1.3.1.37 |
| ecpaTestStreamMonRx1stFrame3Octets The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state. | column | OctetString | .1.3.6.1.4.1.2544.1.12.8.1.3.1.38 |
| ecpaTestStreamMonRx1stFrame4Octets The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state. | column | OctetString | .1.3.6.1.4.1.2544.1.12.8.1.3.1.39 |
| ecpaTestStreamFrameSize This object enables specification of fixed length frame size
in bytes for traffic generation. If not specified, default value
of 64 bytes is used. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.4 |
| ecpaTestStreamMonRx1stFrame5Octets The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state. | column | OctetString | .1.3.6.1.4.1.2544.1.12.8.1.3.1.40 |
| ecpaTestStreamMonRx1stFrame6Octets The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state. | column | OctetString | .1.3.6.1.4.1.2544.1.12.8.1.3.1.41 |
| ecpaTestStreamMonRx1stFrame7Octets The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state. | column | OctetString | .1.3.6.1.4.1.2544.1.12.8.1.3.1.42 |
| ecpaTestStreamMonRx1stFrame8Octets The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state. | column | OctetString | .1.3.6.1.4.1.2544.1.12.8.1.3.1.43 |
| ecpaTestStreamMonRx1stFrame9Octets The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state. | column | OctetString | .1.3.6.1.4.1.2544.1.12.8.1.3.1.44 |
| ecpaTestStreamMonRx1stFrame10Octets The frame contents of the first received frame - next 1024 bytes.
This object does not exist if the ecpaControlTestStatus indicates
initial state. | column | OctetString | .1.3.6.1.4.1.2544.1.12.8.1.3.1.45 |
| ecpaTestStreamMonRxBitRate The object provides the average bit rate on the ECPA test stream. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.46 |
| ecpaTestStreamInnerVlan2Enabled This variable indicates the second(inner) VLAN specification, in the case of a
3-tagged ECPA stream. If a three tagged ECPA stream is
desired, this indicates true. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.8.1.3.1.47 |
| ecpaTestStreamInnerVlan2Id This variable provides the Inner (second) VLAN Id associated with the ECPA stream.
Valid only if ecpaTestStreamInnerVlan2Enabled is enabled. | column | CM-COMMON-MIBVlanId | .1.3.6.1.4.1.2544.1.12.8.1.3.1.48 |
| ecpaTestStreamInnerVlan2Prio This variable provides the Inner (second) VLAN Priority associated with the ECPA stream.
Valid only if ecpaTestStreamInnerVlan2Enabled is enabled. | column | CM-COMMON-MIBVlanPriority | .1.3.6.1.4.1.2544.1.12.8.1.3.1.49 |
| ecpaTestStreamRate The object enables specification of the traffic generation rate. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.5 |
| ecpaTestStreamInnerVlan2EtherType This variable provides the EtherType associated with the Inner (second) VLAN Tag.
Valid only if ecpaTestStreamInnerVlan2Enabled is enabled. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.50 |
| ecpaTestStreamDestIpV4Address This object provides the destination ipv4 IP Address for
the test stream. This is valid when ecpaTestStreamIpVersion is ipv4. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2544.1.12.8.1.3.1.51 |
| ecpaTestStreamDestIpV6Address This object provides the destination ipv6 IP Address for
the test stream. This is valid when ecpaTestStreamIpVersion is ipv6. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2544.1.12.8.1.3.1.52 |
| ecpaTestStreamConfigChanged This object provides information on whether the associated ecpaConfigStream is changed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.8.1.3.1.53 |
| ecpaTestStreamRateHi The object enables specification of the higher 32 bits of the traffic generation rate. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.3.1.54 |
| ecpaTestStreamPayloadType This object enables specification of type of payload to generate
`fixed' type indicates a generation pattern of 5A, A5, 5A, A5 bytes.
`random' type indicates traffic generation wi… | column | EcpaPayloadType | .1.3.6.1.4.1.2544.1.12.8.1.3.1.6 |
| ecpaTestStreamSignature Indicates an 8-byte signature specified by the user in
hexadecimal or ASCII format. This signature is currently
used by the FSP150Mx products for test frame recognition and
wil… | column | OctetString | .1.3.6.1.4.1.2544.1.12.8.1.3.1.7 |
| ecpaTestStreamDestinationMAC Allows specification of destination MAC in the generated
traffic. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2544.1.12.8.1.3.1.8 |
| ecpaTestStreamSourceMAC Allows specification of source MAC in the generated
traffic. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2544.1.12.8.1.3.1.9 |