ecpaControlAction
CM-SA-MIB ·
.1.3.6.1.4.1.2544.1.12.8.1.1.1.11
Object
column
r/w
EcpaControlAction
This object enables starting/stopping of traffic generation as well as resetting of monitored streams. This object may not be specified at configuration creation time - in this case it will take the value of `none'. This allows manager to explicitly control the start and stop of traffic generation/monitoring activity. Value of `stop' is invalid if the activity is specified but not started. Value of `start' is valid during creation time, as well as when activity is already stopped. Specification of `reset' resets the specified streams to default values, as well as clears the control specification. Get on this variable gives the most recent SNMP set specification.
Context
- MIB
- CM-SA-MIB
- OID
.1.3.6.1.4.1.2544.1.12.8.1.1.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ecpaControlEntry
- Table
- ecpaControlTable
- Siblings
- 13
Syntax
EcpaControlAction
- Source
- EcpaControlAction
- Base type
Enumeration
Values & Constraints
Type Values
0 | not-applicable |
1 | start |
2 | stop |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ecpaControlIndex An arbitrary integer index value used to uniquely identify
this Etherjack Connection Performance Analyzer Control Test head.
There is only one test head per card. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.8.1.1.1.1 |
| ecpaControlStream3 This object specifies which stream should be included in the
ECPA execution. Value of 0 indicates that no streams is selected
by ecpaControlStream3. Non 0 value indicates the
sel… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.8.1.1.1.10 |
| ecpaControlTestStatus This object reflects the current status of test set configuration
entry. Upon creation, the status has a value of `initial'; the
status changes to `in-progress' upon ecpaControlAc… | column | EcpaTestStatus | .1.3.6.1.4.1.2544.1.12.8.1.1.1.12 |
| ecpaControlStorageType The type of storage configured for this entry. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.2544.1.12.8.1.1.1.13 |
| ecpaControlRowStatus The status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writ… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2544.1.12.8.1.1.1.14 |
| ecpaControlSourcePort Pointer to the Access or Network Port on which the ECPA test
will be started within a card. | column | SNMPv2-TCVariablePointer | .1.3.6.1.4.1.2544.1.12.8.1.1.1.2 |
| ecpaControlTestType The type of ECPA test to be performed. When 'duration' test is
specified, ECPA test is run for 'ecpaControlDuration' time.
When 'numFrames' test is specified, ECPA test is run fo… | column | EcpaTestType | .1.3.6.1.4.1.2544.1.12.8.1.1.1.3 |
| ecpaControlNumFrames This object enables specification of the number of frames
for traffic generation. Traffic Generation will be completed
after the specified number of frames are transmitted. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.8.1.1.1.4 |
| ecpaControlDuration This object enables specification of the time in seconds
for traffic generation. Traffic Generation will be stopped
after the specified time interval is exhausted. | column | Integer32 | .1.3.6.1.4.1.2544.1.12.8.1.1.1.5 |
| ecpaControlInjectorDirection This object enables specification of the direction of
traffic generation. This value must be specified if the
interface is used for traffic generation. Both of
ecpaControlInjector… | column | CM-COMMON-MIBTrafficDirection | .1.3.6.1.4.1.2544.1.12.8.1.1.1.6 |
| ecpaControlMonitorDirection This object enables specification of the direction of
receival of generated traffic. This value must be specified if the
interface is used for receiving/monitoring generated traff… | column | CM-COMMON-MIBTrafficDirection | .1.3.6.1.4.1.2544.1.12.8.1.1.1.7 |
| ecpaControlStream1 This object specifies which stream should be included in the
ECPA execution. Value of 0 indicates that no streams is selected
by ecpaControlStream1. Non 0 value indicates the
sel… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.8.1.1.1.8 |
| ecpaControlStream2 This object specifies which stream should be included in the
ECPA execution. Value of 0 indicates that no streams is selected
by ecpaControlStream2. Non 0 value indicates the
sel… | column | Integer32 | .1.3.6.1.4.1.2544.1.12.8.1.1.1.9 |