bertTestStreamIndex
CM-SA-MIB ·
.1.3.6.1.4.1.2544.1.12.8.1.19.1.1
Object
column
SNMPv2-SMIInteger32
An integer index value corresponding to the stream index for which the BERT was initiated.
Context
- MIB
- CM-SA-MIB
- OID
.1.3.6.1.4.1.2544.1.12.8.1.19.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- bertTestStreamEntry
- Table
- bertTestStreamTable
- Siblings
- 25
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bertTestStreamMonEndTime The end time of the BERT for this stream. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2544.1.12.8.1.19.1.10 |
| bertTestStreamMonElapsedTime The elapsed time of BERT for this stream in seconds. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.8.1.19.1.11 |
| bertTestStreamMonSyncState The Sync State of the BERT. | column | BertSyncState | .1.3.6.1.4.1.2544.1.12.8.1.19.1.12 |
| bertTestStreamMonRxPattern Allows specification of the Rx pattern of this BERT Test stream. | column | BertPattern | .1.3.6.1.4.1.2544.1.12.8.1.19.1.13 |
| bertTestStreamMonSyncCounts Allows specification of the Sync counts from test start. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.19.1.14 |
| bertTestStreamMonRxBitErrsSinceStart Allows specification of the Received Errors since test start. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.19.1.15 |
| bertTestStreamMonRxBitsSinceStart Allows specification of the Received Bits since test start. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.19.1.16 |
| bertTestStreamMonRxESsSinceStart Allows specification of the Error seconds since test start. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.19.1.17 |
| bertTestStreamMonRxErrRateSinceStart Allows specification of the Received BER Unit since test start. | column | CM-FACILITY-MIBBitErrRate | .1.3.6.1.4.1.2544.1.12.8.1.19.1.18 |
| bertTestStreamMonRxErrRateMultiplierSinceStart Allows specification of the Received BER value with 0.1 Step since test start. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.8.1.19.1.19 |
| bertTestStreamName Symbolic Stream Name that can be associated with an BERT stream. | column | OctetString | .1.3.6.1.4.1.2544.1.12.8.1.19.1.2 |
| bertTestStreamMonRxBitErrsSinceLastSync Allows specification of the Received Errors since last sync. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.19.1.20 |
| bertTestStreamMonRxBitsSinceLastSync Allows specification of the Received Bits since last sync. | column | CM-COMMON-MIBPerfCounter64 | .1.3.6.1.4.1.2544.1.12.8.1.19.1.21 |
| bertTestStreamMonRxESsSinceLastSync Allows specification of the Received Error seconds since last sync. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.19.1.22 |
| bertTestStreamMonRxErrRateSinceLastSync Allows specification of the Received BER Unit since last sync. | column | CM-FACILITY-MIBBitErrRate | .1.3.6.1.4.1.2544.1.12.8.1.19.1.23 |
| bertTestStreamMonRxErrRateMultiplierSinceLastSync Allows specification of the Received BER value with 0.1 Step since last sync. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.19.1.24 |
| bertTestStreamConfigChangedFlag This object provides information on whether the associated bertConfigStream is changed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.8.1.19.1.25 |
| bertTestStreamMonOOSSsSinceStart This object means the Out of Sync Seconds since start. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2544.1.12.8.1.19.1.26 |
| bertTestStreamTxPattern Allows specification of the Tx pattern of this BERT Test stream. | column | BertPattern | .1.3.6.1.4.1.2544.1.12.8.1.19.1.3 |
| bertTestStreamErrInjectEnabled This object allows specification of whether Bit Error be injected. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2544.1.12.8.1.19.1.4 |
| bertTestStreamErrInjectRate Bit Error Rate, applicable when Error Injection is enabled. | column | CM-FACILITY-MIBBitErrRate | .1.3.6.1.4.1.2544.1.12.8.1.19.1.5 |
| bertTestStreamErrInjectRateMultiplier BER value with 0.1 Step, in this release is fixed 10,
only applicable when Error Injection is enabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2544.1.12.8.1.19.1.6 |
| bertTestStreamUserPatternLength User defined testing pattern length. | column | BertUserPatternLength | .1.3.6.1.4.1.2544.1.12.8.1.19.1.7 |
| bertTestStreamUserPattern User defined testing pattern in a HEX format display string,
applicable when test pattern is user defined. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2544.1.12.8.1.19.1.8 |
| bertTestStreamMonStartTime The start time of the BERT for this stream. | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2544.1.12.8.1.19.1.9 |