vrrpv3OperationsRowStatus
CISCOSB-VRRPV3-MIB ·
.1.3.6.1.2.1.68.1.1.1.1.13
Object
The RowStatus variable should be used in accordance to
installation and removal conventions for conceptual
rows. When `vrrpv3OperationsRowStatus' is set to
active(1), no other objects in the conceptual row can
be modified.
To create a row in this table, a manager sets this
object to either createAndGo(4) or createAndWait(5).
Until instances of all corresponding columns are
appropriately configured, the value of the
Corresponding instance of the
`vrrpv3OperationsRowStatus' column will be read as
notReady(3).
In particular, a newly created row cannot be made
active(1) until (minimally) the corresponding instance
of vrrpv3OperationsInetAddrType, vrrpv3OperationsVrId
and vrrpv3OperationsPrimaryIpAddr has been set and
there is at least one active row in the
`vrrpv3AssociatedIpAddrTable' defining an associated
IP address.
notInService(2) should be used to administratively
bring the row down.
A typical order of operation to add a row is:
1. Create a row in vrrpv3OperationsTable with
createAndWait(5).
2. Create one or more corresponding rows in
vrrpv3AssociatedIpAddrTable.
3. Populate the vrrpv3OperationsEntry.
4. set vrrpv3OperationsRowStatus to active(1).
A typical order of operation to delete an entry is:
1. Set vrrpv3OperationsRowStatus to notInService(2).
2. Set the corresponding rows in
vrrpv3AssociatedIpAddrTable to destroy(6) to delete the
entry.
3. set vrrpv3OperationsRowStatus to destroy(6) to
delete the entry.
Context
- MIB
- CISCOSB-VRRPV3-MIB
- OID
.1.3.6.1.2.1.68.1.1.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vrrpv3OperationsEntry
- Table
- vrrpv3OperationsTable
- Siblings
- 12
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vrrpv3OperationsVrId This object contains the Virtual Router Identifier
(VRID). | column | Vrrpv3VrIdTC | .1.3.6.1.2.1.68.1.1.1.1.1 |
| vrrpv3OperationsPreemptMode Controls whether a higher priority virtual router will
preempt a lower priority master. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.68.1.1.1.1.10 |
| vrrpv3OperationsAcceptMode Controls whether a virtual router in Master state
will accept packets addressed to the address owner's
IPv6 address as its own if it is not the IPv6 address
owner. Default is Fal… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.68.1.1.1.1.11 |
| vrrpv3OperationsUpTime This is the value of the `sysUpTime' object when this
virtual router (i.e., the `vrrpv3OperStatus')
transitioned out of `initialized'. | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.68.1.1.1.1.12 |
| vrrpv3OperationsInetAddrType The IP address type of Vrrpv3OperationsEntry. This
value determines the type for both
vrrpv3OperationsMasterIpAddr and
vrrpv3OperationsPrimaryIpAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.68.1.1.1.1.2 |
| vrrpv3OperationsMasterIpAddr The master router's real IP address. Master router
would set this address to vrrpv3OperationsPrimaryIpAddr
while transitioning to master state. For backup
routers, this is the IP … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.68.1.1.1.1.3 |
| vrrpv3OperationsPrimaryIpAddr In the case where there are more than one IP
Address (associated IP addresses) for a given
`ifIndex', this object is used to specify the IP
address that will become the
vrrpv3Oper… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.68.1.1.1.1.4 |
| vrrpv3OperationsVirtualMacAddr The virtual MAC address of the virtual router.
Although this object can be derived from the
'vrrpv3OperationsVrId' object, it is defined so that it
is easily obtainable by a manag… | column | SNMPv2-TCMacAddress | .1.3.6.1.2.1.68.1.1.1.1.5 |
| vrrpv3OperStatus The current state of the virtual router. This object
has three defined values:
- `initialize', which indicates that the
virtual router is waiting for a startu… | column | Enumeration | .1.3.6.1.2.1.68.1.1.1.1.6 |
| vrrpv3OperationsPriority This object specifies the priority to be used for the
virtual router master election process. Higher values
imply higher priority.
A priority of '0', although not … | column | Unsigned32 | .1.3.6.1.2.1.68.1.1.1.1.7 |
| vrrpv3OperationsAddrCount The number of IP addresses that are associated with
this virtual router. This number is equal to the
number of rows in the vrrpv3AssociatedAddrTable that
correspond to a given if… | column | Integer32 | .1.3.6.1.2.1.68.1.1.1.1.8 |
| vrrpv3OperationsAdvInterval The time interval, in centiseconds, between sending
advertisement messages. Only the master router sends
VRRP advertisements. | column | centiseconds Integer32 | .1.3.6.1.2.1.68.1.1.1.1.9 |