vrrpv3OperStatus
CISCOSB-VRRPV3-MIB ·
.1.3.6.1.2.1.68.1.1.1.1.6
Object
column
Enumeration
The current state of the virtual router. This object
has three defined values:
- `initialize', which indicates that the
virtual router is waiting for a startup event.
- `backup', which indicates the virtual router is
monitoring the availability of the master router.
- `master', which indicates that the virtual router
is forwarding packets for IP addresses that are
associated with this router.
Context
- MIB
- CISCOSB-VRRPV3-MIB
- OID
.1.3.6.1.2.1.68.1.1.1.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vrrpv3OperationsEntry
- Table
- vrrpv3OperationsTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | initialize |
2 | backup |
3 | master |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vrrpv3OperationsVrId This object contains the Virtual Router Identifier
(VRID). | column | Vrrpv3VrIdTC | .1.3.6.1.2.1.68.1.1.1.1.1 |
| vrrpv3OperationsPreemptMode Controls whether a higher priority virtual router will
preempt a lower priority master. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.68.1.1.1.1.10 |
| vrrpv3OperationsAcceptMode Controls whether a virtual router in Master state
will accept packets addressed to the address owner's
IPv6 address as its own if it is not the IPv6 address
owner. Default is Fal… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.68.1.1.1.1.11 |
| vrrpv3OperationsUpTime This is the value of the `sysUpTime' object when this
virtual router (i.e., the `vrrpv3OperStatus')
transitioned out of `initialized'. | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.68.1.1.1.1.12 |
| vrrpv3OperationsRowStatus The RowStatus variable should be used in accordance to
installation and removal conventions for conceptual
rows. When `vrrpv3OperationsRowStatus' is set to
active(1), no other obj… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.68.1.1.1.1.13 |
| vrrpv3OperationsInetAddrType The IP address type of Vrrpv3OperationsEntry. This
value determines the type for both
vrrpv3OperationsMasterIpAddr and
vrrpv3OperationsPrimaryIpAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.68.1.1.1.1.2 |
| vrrpv3OperationsMasterIpAddr The master router's real IP address. Master router
would set this address to vrrpv3OperationsPrimaryIpAddr
while transitioning to master state. For backup
routers, this is the IP … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.68.1.1.1.1.3 |
| vrrpv3OperationsPrimaryIpAddr In the case where there are more than one IP
Address (associated IP addresses) for a given
`ifIndex', this object is used to specify the IP
address that will become the
vrrpv3Oper… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.68.1.1.1.1.4 |
| vrrpv3OperationsVirtualMacAddr The virtual MAC address of the virtual router.
Although this object can be derived from the
'vrrpv3OperationsVrId' object, it is defined so that it
is easily obtainable by a manag… | column | SNMPv2-TCMacAddress | .1.3.6.1.2.1.68.1.1.1.1.5 |
| vrrpv3OperationsPriority This object specifies the priority to be used for the
virtual router master election process. Higher values
imply higher priority.
A priority of '0', although not … | column | Unsigned32 | .1.3.6.1.2.1.68.1.1.1.1.7 |
| vrrpv3OperationsAddrCount The number of IP addresses that are associated with
this virtual router. This number is equal to the
number of rows in the vrrpv3AssociatedAddrTable that
correspond to a given if… | column | Integer32 | .1.3.6.1.2.1.68.1.1.1.1.8 |
| vrrpv3OperationsAdvInterval The time interval, in centiseconds, between sending
advertisement messages. Only the master router sends
VRRP advertisements. | column | centiseconds Integer32 | .1.3.6.1.2.1.68.1.1.1.1.9 |