rlPhdResetButtonStatus
CISCOSB-Physicaldescription-MIB ·
.1.3.6.1.4.1.9.6.1.101.53.29
Object
scalar
r/w
Enumeration
This scalar mib holds the Reset button status configuration.
Context
- MIB
- CISCOSB-Physicaldescription-MIB
- OID
.1.3.6.1.4.1.9.6.1.101.53.29- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rlPhysicalDescription
- Siblings
- 29
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | enabled |
1 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlPhdMibVersion MIB's version, the current version is 3.
1: original version
2: a. new tables
rlPhdModuleHotSwapTable
rlPhdStackOrderTable
b. new scalars
rlPhdStackReor… | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.53.1 |
| rlPhdForceControllerUnit Force unit to be controller. | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.53.10 |
| rlPhdStackFixedUnit Determine which unit will be on bottom/top of list
on Show-List command(see . | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.53.11 |
| rlPhdStackFixedUnitLocation Determine the bottom/top object in the stack table. | scalar | Enumeration | .1.3.6.1.4.1.9.6.1.101.53.12 |
| rlPhdStackReloadUnit Reset a specific unit. | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.53.13 |
| rlPhdUnitGenParamTable For each module (board) there is an entry describing it in this
module | table | - | .1.3.6.1.4.1.9.6.1.101.53.14 |
| rlPhdUnitEnvParamTable For each module (board) there is an entry describing it in this
module | table | - | .1.3.6.1.4.1.9.6.1.101.53.15 |
| rlPhdStackOrderTopUnit This scalar mib holds the Top unit for the stack order command | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.53.16 |
| rlPhdStackOrderBottomUnit This scalar mib holds the Bottom unit for the stack order command | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.53.17 |
| rlPhdStackOrderPermutation This scalar mib holds stack permutation | scalar | OctetString | .1.3.6.1.4.1.9.6.1.101.53.18 |
| rlPhdNumberOfPoeUnits Shows the current number of poe units in the stack. | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.53.19 |
| rlPhdModuleTable For each module (board) there is an entry describing it in this
module | table | - | .1.3.6.1.4.1.9.6.1.101.53.2 |
| rlPhdPoeTable For each module (board) there is an entry describing it in this
module | table | - | .1.3.6.1.4.1.9.6.1.101.53.20 |
| rlPhdPhyLedStackUnit This scalar mib holds the unit number for the stack light command | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.53.21 |
| rlPhdPhyLedTimeout This scalar mib holds the timeout for the stack light command.
May be in the range 2..60 sec. (default - 5 sec.), if the timeout = 0
- all units return to normal state. | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.53.22 |
| rlCascadeTable For each cascaded port for stacking unit there is an entry describing it in this table | table | - | .1.3.6.1.4.1.9.6.1.101.53.23 |
| rlCascadeAdminTable For each unit there is an entry describing its cascade ports and speed after reset | table | - | .1.3.6.1.4.1.9.6.1.101.53.24 |
| rlPhdUnitStackPortTable The table listing information required for stack port.
The index for the table is ifindex; the ports that represented in that table are
operational stack ports or ports that can b… | table | - | .1.3.6.1.4.1.9.6.1.101.53.25 |
| rlPhdUnitIfsMappingTable Unit Interface Mapping description table. | table | - | .1.3.6.1.4.1.9.6.1.101.53.26 |
| rlPhdPhyLedTimeRemaining This scalar mib holds the time remaining for the stack light command timout to expire.
May be in the range 0..300 seconds, if the timeout = 0
- stack light command timeour expired. | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.53.27 |
| rlPhdPhyLedPattern This scalar mib holds the pattern configuration required for the stack light command. | scalar | LedLocatorPattern | .1.3.6.1.4.1.9.6.1.101.53.28 |
| rlPhdPortsTable Lists the physical or physical-related attributes of ports | table | - | .1.3.6.1.4.1.9.6.1.101.53.3 |
| rlPhdBeaconLightTable This table contains one entry. The entry contains port list and duration of interfaces that have configured beacon light (port locate). | table | - | .1.3.6.1.4.1.9.6.1.101.53.30 |
| rlPhdStackTable For each stack unit there is an entry describing it in this table | table | - | .1.3.6.1.4.1.9.6.1.101.53.4 |
| rlPhdModuleHotSwapTable For each module (board) there is an entry describing its Hot Swap
status | table | - | .1.3.6.1.4.1.9.6.1.101.53.5 |
| rlPhdStackOrderTable This table enables the user to configure the order
of the stack units as displayed on his GUI.
The order of the entries in this table corresponds
to the last configured order. If … | table | - | .1.3.6.1.4.1.9.6.1.101.53.6 |
| rlPhdStackReorder Setting this MIB object will cause the settings of the
rlPhdStackOrderDesiredUnitPosition MIB object instances to take effect.
After setting this MIB object and until a further ch… | scalar | Enumeration | .1.3.6.1.4.1.9.6.1.101.53.7 |
| rlPhdNumberOfUnits Shows the current number of units in the stack. | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.53.8 |
| rlPhdMaxNumberOfUnits Shows the maximum number of units in the stack. | scalar | Integer32 | .1.3.6.1.4.1.9.6.1.101.53.9 |