rlPolicyActionDropPolicy
CISCOSB-POLICY-MIB ·
.1.3.6.1.4.1.9.6.1.101.59.5.2.1.6
Object
column
r/w
Enumeration
No description available.
Context
- MIB
- CISCOSB-POLICY-MIB
- OID
.1.3.6.1.4.1.9.6.1.101.59.5.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rlPolicyActionEntry
- Table
- rlPolicyActionTable
- Siblings
- 23
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | alwaysDrop |
3 | tailDrop |
4 | randomDrop |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlPolicyActionIndex This enumerates the Action entry. | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.1 |
| rlPolicyActionChangeVpt Routed packets that run through the Rules receive VPT as define at the
service class they attached to, bridge packets receive through the
802.1p operation unless we define to chan… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.10 |
| rlPolicyActionNewVpt Priority Tag that will be written to packets . | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.11 |
| rlPolicyActionServiceClassPointer Specifies the index in rlPolicyServiceClassTable denoting
the service class to which the packet should be assigned
after the action specified in this entry is carried out.
A value… | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.12 |
| rlPolicyActionStatus The status of the table entry | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.13 |
| rlPolicyActionChangeDscpNonConform If true, the packet is re-marked with the value indicated by
newDscp for non conforming packets.
If false, the packet's DSCP value is not changed | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.14 |
| rlPolicyActionChangeNewDscpNonConform Indicates the new DSCP with which the packet should
be marked | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.15 |
| rlPolicyActionAdvancedTrustMode Indicates if egress queue is assigned for packets match
rule according to global trust mode or note. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.16 |
| rlPolicyActionNewIpPrecedence Indicates the new Ip- Precedence with which the packet should
be marked | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.17 |
| rlPolicyActionChangeIpPrecedence If true, the packet is re-marked with the value indicated by
newIpPrecedence above. If false, the packet's DSCP value is not changed | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.18 |
| rlPolicyActionReDirect Specified the redirection action/ | column | RlPolicyRedirectAction | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.19 |
| rlPolicyActionNewDscp Indicates the new DSCP with which the packet should
be marked | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.2 |
| rlPolicyActionNewInterface Relevant if rlQosClassMapRedirect is either
'redirectToInterface' or 'analyzerPort'.
Specified the output interface the packet is redireted to or
the port that gets copy of the pa… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.20 |
| rlPolicyActionChangeVidAction If 'mark', than the classified
traffic will be remarked with new VLAN id.
If 'disabled' VLAN id is not changed.
If markNestedVlan, if the egress interface defined as
VLAN tagged m… | column | RlPolicyMarkVlanAction | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.21 |
| rlPolicyActionNewVid If rlPolicyActionChangeVid is true,
specify the new Vlan id to assigned to the packet | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.22 |
| rlPolicyActionTrapTypeId If now zero, Indicates the trap type id the matched packets arrives with,
relevant when RedirectAction is trap or mirror. | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.23 |
| rlPolicyActionAddTunnel If not zero - Tunnel is added to matched packets. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.24 |
| rlPolicyActionChangeDscp If true, the packet is re-marked with the value indicated by
newDscp above. If false, the packet's DSCP value is not changed | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.3 |
| rlPolicyActionMinThreshold The min-threshold is the queue depth that a random
drop process will seek to manage the queue's depth to.
This object is in the action table rather than the
queue table because Di… | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.4 |
| rlPolicyActionMaxThreshold The max-threshold is the maximum permissible queue
depth. In tail drop scenarios, the queue will drop if a
packet is presented to it and it is instantaneously
full by this measure… | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.5 |
| rlPolicyActionDroppedPackets The number of packets dropped by this action | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.7 |
| rlPolicyActionNonDsInProfileDropPrecedence This paramer is used at non diffserv mode to attached the drop precedence
for packet InProfile (metering), only if there is a support for drop precedence
and with what level. | column | Enumeration | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.8 |
| rlPolicyActionNonDsOutProfileDropPrecedence This paramer is used at non diffserv mode to attached the drop precedence
for packet OutProfile (metering), only if there is a support for drop precedence
and with what level. | column | Enumeration | .1.3.6.1.4.1.9.6.1.101.59.5.2.1.9 |