rlOspfIfBackupDesignatedRouterId
CISCOSB-OSPF-MIB ·
.1.3.6.1.4.1.9.6.1.101.210.8.1.25
Object
column
OSPF-MIBRouterID
The Router ID of the backup designated router.
Context
- MIB
- CISCOSB-OSPF-MIB
- OID
.1.3.6.1.4.1.9.6.1.101.210.8.1.25- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rlOspfIfEntry
- Table
- rlOspfIfTable
- Siblings
- 36
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlOspfIfProcessId A 32-bit integer uniquely identifying an OSPF process. | column | RlOspfProcessID | .1.3.6.1.4.1.9.6.1.101.210.8.1.1 |
| rlOspfIfHelloInterval The length of time, in seconds, between the Hello packets
that the router sends on the interface. This value must be
the same for all routers attached to a common network. | column | seconds OSPF-MIBHelloRange | .1.3.6.1.4.1.9.6.1.101.210.8.1.10 |
| rlOspfIfRtrDeadInterval The number of seconds that a router's Hello packets have
not been seen before its neighbors declare the router down.
This should be some multiple of the Hello interval. This
valu… | column | seconds RlOspfDeadIntervalRangeTC | .1.3.6.1.4.1.9.6.1.101.210.8.1.11 |
| rlOspfIfPollInterval The larger time interval, in seconds, between the Hello
packets sent to an inactive non-broadcast multi-access
neighbor. | column | seconds OSPF-MIBPositiveInteger | .1.3.6.1.4.1.9.6.1.101.210.8.1.12 |
| rlOspfIfState The OSPF Interface State. | column | Enumeration | .1.3.6.1.4.1.9.6.1.101.210.8.1.13 |
| rlOspfIfDesignatedRouter The IP address of the designated router. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.6.1.101.210.8.1.14 |
| rlOspfIfBackupDesignatedRouter The IP address of the backup designated
router. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.6.1.101.210.8.1.15 |
| rlOspfIfEvents The number of times this OSPF interface has
changed its state or an error has occurred.
Discontinuities in the value of this counter can occur
at re-initialization … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.6.1.101.210.8.1.16 |
| rlOspfIfAuthKey The cleartext password used as an OSPF
authentication key when simplePassword security
is enabled. This object does not access any OSPF
cryptogaphic (e.g., MD5) authentication ke… | column | OctetString | .1.3.6.1.4.1.9.6.1.101.210.8.1.17 |
| rlOspfIfStatus This object permits management of the table by
facilitating actions such as row creation,
construction, and destruction.
The value of this object has no effect on
w… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.6.1.101.210.8.1.18 |
| rlOspfIfMulticastForwarding The way multicasts should be forwarded on this
interface: not forwarded, forwarded as data
link multicasts, or forwarded as data link
unicasts. Data link multicasting is not
mean… | column | Enumeration | .1.3.6.1.4.1.9.6.1.101.210.8.1.19 |
| rlOspfIfIpAddress The IP address of this OSPF interface. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.6.1.101.210.8.1.2 |
| rlOspfIfDemand Indicates whether Demand OSPF procedures (hello
suppression to FULL neighbors and setting the
DoNotAge flag on propagated LSAs) should be
performed on this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.210.8.1.20 |
| rlOspfIfAuthType The authentication type specified for an interface.
Note that this object can be used to engage
in significant attacks against an OSPF router. | column | RlOspfAdminAuthenticationType | .1.3.6.1.4.1.9.6.1.101.210.8.1.21 |
| rlOspfIfLsaCount The total number of link-local link state advertisements
in this interface's link-local link state database. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.6.1.101.210.8.1.22 |
| rlOspfIfLsaCksumSum The 32-bit unsigned sum of the Link State
Advertisements' LS checksums contained in this
interface's link-local link state database.
The sum can be used to determine if there has
… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.6.1.101.210.8.1.23 |
| rlOspfIfDesignatedRouterId The Router ID of the designated router. | column | OSPF-MIBRouterID | .1.3.6.1.4.1.9.6.1.101.210.8.1.24 |
| rlOspfIfOperStatus The current operational state of the OSPF interface. | column | Enumeration | .1.3.6.1.4.1.9.6.1.101.210.8.1.26 |
| rlOspfIfAuthKeyChain The name of the authentication key-chain configured
on this interface. The key-chain is a reference to
which set of secret keys are to be accessed in order
to determine which se… | column | OctetString | .1.3.6.1.4.1.9.6.1.101.210.8.1.27 |
| rlOspfIfPassive Indicates whether this interface is a passive interface. If set
to TRUE, we suppress HELLO packets sent on and received from this
interface. We will therefore advertise this int… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.210.8.1.28 |
| rlOspfIfLsaRefreshIntvl Self-originated LSAs are periodically reflooded into the routing
domain, to add to the robustness of the OSPF protocol. This value
determines the interval between refreshes of LS… | column | seconds Integer32 | .1.3.6.1.4.1.9.6.1.101.210.8.1.29 |
| rlOspfAddressLessIf For the purpose of easing the instancing of
addressed and addressless interfaces; this
variable takes the value 0 on interfaces with
IP addresses and the corresponding value of
if… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.9.6.1.101.210.8.1.3 |
| rlOspfIfFastHelloMultiplier The number of Hellos that should be sent within 1 second when
using Fast Hellos on this interface. This value does not have
to be same for all routers attached to a common networ… | column | RlOspfFastHelloMultiplierRange | .1.3.6.1.4.1.9.6.1.101.210.8.1.30 |
| rlOspfIfMtuIgnore This object controls whether DC-OSPF checks the MTU size on
incoming Database Description packets. By default, if the
received MTU size in a DB Description packet is higher than
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.210.8.1.31 |
| rlOspfIfNameLookup A flag to note whether to look up Domain Name System (DNS) names
for use in all OSPF show EXEC command displays. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.6.1.101.210.8.1.32 |
| rlOspfIfIfIndex A 32-bit index identifying this interface, or zero if no index
value is known. For interfaces having no IP Address this field
is automatically set to the value of the address-les… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.6.1.101.210.8.1.33 |
| rlOspfIfActualAuthType The actual authentication type specified for an interface. | column | RlOspfAuthenticationType | .1.3.6.1.4.1.9.6.1.101.210.8.1.34 |
| rlOspfIfMd5DigestAuthKeyId A 32-bit key-id for this interface for generate MD5 digest
authentication for the OSPF packets. | column | Integer32 | .1.3.6.1.4.1.9.6.1.101.210.8.1.35 |
| rlOspfIfMd5DigestAuthKey The key to be used to generate MD5 digest authentication for
the OSPF packets. This field specifies the authentication string.
A separate key can be assigned to each subnetwork. A… | column | OctetString | .1.3.6.1.4.1.9.6.1.101.210.8.1.36 |
| rlOspfIfPrefixSuppression Prefix generation on the interface is suppressed - for any interface type, including loopbacks and passive interfaces.
None - behavior according to global config, see rlOspfPrefix… | column | Enumeration | .1.3.6.1.4.1.9.6.1.101.210.8.1.37 |
| rlOspfIfAreaId A 32-bit integer uniquely identifying the area
to which the interface connects. Area ID
0.0.0.0 is used for the OSPF backbone. | column | OSPF-MIBAreaID | .1.3.6.1.4.1.9.6.1.101.210.8.1.4 |
| rlOspfIfType The OSPF interface type.
By way of a default, this field may be intuited
from the corresponding value of ifType.
Broadcast LANs, such as Ethernet and IEEE 802.5,
take the value 'b… | column | Enumeration | .1.3.6.1.4.1.9.6.1.101.210.8.1.5 |
| rlOspfIfAdminStat The OSPF interface's administrative status.
The value formed on the interface, and the interface
will be advertised as an internal route to some area.
The value 'disabled' denotes… | column | OSPF-MIBStatus | .1.3.6.1.4.1.9.6.1.101.210.8.1.6 |
| rlOspfIfRtrPriority The priority of this interface. Used in
multi-access networks, this field is used in
the designated router election algorithm. The
value 0 signifies that the router is not eligi… | column | OSPF-MIBDesignatedRouterPriority | .1.3.6.1.4.1.9.6.1.101.210.8.1.7 |
| rlOspfIfTransitDelay The estimated number of seconds it takes to
transmit a link state update packet over this
interface. Note that the minimal value SHOULD be
1 second. | column | seconds RlOspfUpToRefreshIntervalTC | .1.3.6.1.4.1.9.6.1.101.210.8.1.8 |
| rlOspfIfRetransInterval The number of seconds between link state advertisement
retransmissions, for adjacencies belonging to this
interface. This value is also used when retransmitting
database descript… | column | seconds RlOspfUpToRefreshIntervalTC | .1.3.6.1.4.1.9.6.1.101.210.8.1.9 |