rlOspfEnableTrapsOspfStateChange
CISCOSB-OSPF-MIB ·
.1.3.6.1.4.1.9.6.1.101.210.25
Object
A bit mask indicating enable SNMP notifications for OSPF State Change.
Bit 0, if set, for ifStateChange trap.
only the ospfIfStateChange trap.
Sends SNMP notifications when there has been a change in the state
of a non-virtual OSPF interface.
Bit 1, if set, for neighborStateChange trap.
enables only the ospfNbrStateChange trap.
Sends SNMP notifications when there has been a change in the state
of a non-virtual OSPF neighbor.
Bit 2, if set, for ospfVirtIfStateChange trap.
only the ospfVirtIfStateChange trap.
Sends SNMP notifications when there has been a change in the state
of a virtual OSPF interface.
Bit 3, if set, for ospfVirtNbrStateChange trap.
enables only the ospfVirtNbrStateChange trap.
Sends SNMP notifications when there has been a change in the state
of a virtual OSPF neighbor.
Context
- MIB
- CISCOSB-OSPF-MIB
- OID
.1.3.6.1.4.1.9.6.1.101.210.25- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rlOspf
- Siblings
- 22
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlOspfInstance Selected OSPF Process ID. Additional key value for
old fashion usage of OSPF standard MIB to support
multi OSPF instance. | scalar | RlOspfProcessID | .1.3.6.1.4.1.9.6.1.101.210.1 |
| rlOspfVirtIfTable Information about this router's virtual interfaces
that the OSPF Process is configured to carry on. | table | - | .1.3.6.1.4.1.9.6.1.101.210.10 |
| rlOspfNbrTable A table describing all non-virtual neighbors
in the locality of the OSPF router. | table | - | .1.3.6.1.4.1.9.6.1.101.210.11 |
| rlOspfVirtNbrTable This table describes all virtual neighbors.
Since virtual links are configured
in the Virtual Interface Table, this table is read-only. | table | - | .1.3.6.1.4.1.9.6.1.101.210.12 |
| rlOspfExtLsdbTable deprecated The OSPF Process's external LSA link state database.
This table is identical to the OSPF LSDB Table
in format, but contains only external link state
advertisements. Th… | table | - | .1.3.6.1.4.1.9.6.1.101.210.13 |
| rlOspfAreaAggregateTable The Area Aggregate Table acts as an adjunct
to the Area Table. It describes those address aggregates
that are configured to be propagated from an area.
Its purpose is to reduce t… | table | - | .1.3.6.1.4.1.9.6.1.101.210.14 |
| rlOspfLocalLsdbTable The OSPF Process's link-local link state database
for non-virtual links.
This table is identical to the OSPF LSDB Table
in format, but contains only link-local Link State
Advertis… | table | - | .1.3.6.1.4.1.9.6.1.101.210.18 |
| rlOspfVirtLocalLsdbTable The OSPF Process's link-local link state database
for virtual links.
This table is identical to the OSPF LSDB Table
in format, but contains only link-local Link State
A… | table | - | .1.3.6.1.4.1.9.6.1.101.210.19 |
| rlOspfGeneralGroupTable OSPF Instance General Variables | table | - | .1.3.6.1.4.1.9.6.1.101.210.2 |
| rlOspfEnableTrapsOspfErrors A bit mask indicating enable SNMP notifications for OSPF errors.
Bit 0, if set, for authenticationFailure trap.
enables only the ospfIfFailure trap.
Allows SNMP notific… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.6.1.101.210.20 |
| rlOspfEnableTrapsOspfLsa A bit mask indicating enable SNMP notifications for OSPF LSA
Bit 0, if set, for maxAgeLsa trap.
enable the ospfMaxAgeLsa trap.
Bit 1, if set, for originateLs… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.6.1.101.210.21 |
| rlOspfEnableTrapsOspfRateLimitSeconds Sets the rate limit window size, in seconds. A number from 2 to 60.
The default value is 10. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.6.1.101.210.22 |
| rlOspfEnableTrapsOspfRateLimitTrapNumber Sets the maximum number of traps sent during the window time.
A number from 0 to 300.
The default number is 7. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.6.1.101.210.23 |
| rlOspfEnableTrapsOspfTransmit A bit mask indicating enable SNMP notifications for OSPF transmit
Bit 0, if set, for packets trap.
enables only the ospfTxRetransmit trap.
Allows SNMP notifications to… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.6.1.101.210.24 |
| rlOspfExt | node | - | .1.3.6.1.4.1.9.6.1.101.210.26 |
| rlOspfAreaTable Information describing the configured parameters and
cumulative statistics of the router's attached areas.
The interfaces and virtual links are configured
as part of these areas. … | table | - | .1.3.6.1.4.1.9.6.1.101.210.3 |
| rlOspfStubAreaTable The set of metrics that will be advertised
by a default Area Border Router into a stub area. | table | - | .1.3.6.1.4.1.9.6.1.101.210.4 |
| rlOspfLsdbTable The OSPF Process's link state database (LSDB).
The LSDB contains the link state advertisements
from throughout the areas that the device is attached to. | table | - | .1.3.6.1.4.1.9.6.1.101.210.5 |
| rlOspfAreaRangeTable obsolete The Address Range Table acts as an adjunct to the Area
Table. It describes those Address Range Summaries that
are configured to be propagated from an Area to reduce
the amount of… | table | - | .1.3.6.1.4.1.9.6.1.101.210.6 |
| rlOspfHostTable The Host/Metric Table indicates what hosts are directly
attached to the router, what metrics and types
of service should be advertised for them,
and what areas they are found with… | table | - | .1.3.6.1.4.1.9.6.1.101.210.7 |
| rlOspfIfTable The OSPF Interface Table describes the interfaces
from the viewpoint of OSPF.
It augments the ipAddrTable with OSPF specific information. | table | - | .1.3.6.1.4.1.9.6.1.101.210.8 |
| rlOspfIfMetricTable The Metric Table describes the metrics to be advertised
for a specified interface at the various types of service.
As such, this table is an adjunct of the OSPF Interface
Table.
… | table | - | .1.3.6.1.4.1.9.6.1.101.210.9 |