cXgcpMediaGwQuarantineProcess
CISCO-XGCP-MIB ·
.1.3.6.1.4.1.9.9.318.1.2.1.1.12
Object
This object is used to determine how to handle persistent
events.
If this object is set to 'true', the quarantined events
should be processed, otherwise the quarantined events is
discarded.
Context
- MIB
- CISCO-XGCP-MIB
- OID
.1.3.6.1.4.1.9.9.318.1.2.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cXgcpMediaGwEntry
- Table
- cXgcpMediaGwTable
- Siblings
- 24
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cXgcpMediaGwRequestTimeOut The request timeout is the period that the XGCP protocol
waits before retransmitting an unacknowledged message.
It is the responsibility of the requesting entity to
provide suit… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.318.1.2.1.1.1 |
| cXgcpMediaGwAckSdpEnabled This object specifies the ACK SDP is enabled or not.
If this object is set to 'true', then it sends ADP with ACK
when CODEC or reportable NTE delta changed, or an a… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.318.1.2.1.1.10 |
| cXgcpMediaGwUndottedNotation This object enables/disables the undotted notation
for CODEC.
This object is used to set CODEC notation to
'dotted' or 'undotted' in SDP between the gateway
and t… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.318.1.2.1.1.11 |
| cXgcpMediaGwQuarantineLoop This object controls the default quarantine mode.
If this object is set to 'true', the default quarantine
mode is 'loop', not 'step'.
When this object is set to 'tr… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.318.1.2.1.1.13 |
| cXgcpMediaGwQuarantinePersist This object specifies how the persist events will
be handled in quarantine processing.
If this object is set to 'true', the persistent events
bypass quarantine buffer.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.318.1.2.1.1.14 |
| cXgcpMediaGwPiggybackMsg This object enables/disables the piggyback message
generating.
If the piggyback message generating is enabled,
a call agent can send several MGCP messages in the
same UDP packe… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.318.1.2.1.1.15 |
| cXgcpMediaGwMaxMsgSize This object specifies the maximum allowed xGCP message
size which is used for checking if the size will be
supported by the call agent via (AuditEndPoint) response.
A value of 0… | column | bytes Integer32 | .1.3.6.1.4.1.9.9.318.1.2.1.1.16 |
| cXgcpMediaGwLastFailMgcAddrType This object indicates the address type, either IPv4 or
IPv6, of cxeCallCtrlLastFailMgcAddr. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.318.1.2.1.1.17 |
| cXgcpMediaGwLastFailMgcAddr This object indicates the address of last MGC which the
media gateway had tried to communicate with but failed. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.318.1.2.1.1.18 |
| cXgcpMediaGwDtmfRelay When this object is set to 'true', the digits will be
sent as peer-to-peer packet in the bearer.
When this object is set to 'false', the digits will be
sent as regular voice packe… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.318.1.2.1.1.19 |
| cXgcpMediaGwRequestRetries This object specifies the number of retries for a request
that exceeds timeout without acknowledge before it tries
to connect to another MGC. | column | times Integer32 | .1.3.6.1.4.1.9.9.318.1.2.1.1.2 |
| cXgcpMediaGwCaleaEnabled CALEA, Communication Assistance for Law Enforcement Act,
is a feature that allows for a lawful intercept of a
call details and call contents originating or terminating
on specif… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.318.1.2.1.1.20 |
| cXgcpMediaGwConfiguredPackages This object represents the bit map of MGCP packages
configured and supported in the gateway.
Bit 0 - Not Found
Bit 1 - Package DC (Don't care package)
Bit 2 … | column | Bits | .1.3.6.1.4.1.9.9.318.1.2.1.1.21 |
| cXgcpMediaGwConnOosRsipBehavior This object specifies the RSIP behavior of the endpoints with
active calls (in connections) when they are forced to
out-of-service.
The following values can be set … | column | Enumeration | .1.3.6.1.4.1.9.9.318.1.2.1.1.22 |
| cXgcpMediaGwLongDurTimer This object specifies the long duration timer. It is used
to define the long duration of a connection. Once the timer
expires, a notification will be sent to the MGC to indicate
… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.318.1.2.1.1.23 |
| cXgcpMediaGwProfile This object specifies the XGCP profile in the media
gateway level.
The value of 0 means the XGCP default profile is
used in the media gateway level.
… | column | CISCO-MEDIA-GATEWAY-MIBCCallControlProfileIndexOrZero | .1.3.6.1.4.1.9.9.318.1.2.1.1.24 |
| cXgcpMediaGwAnnexabSdpEnabled This object specifies the format for parsing or generating
G.723 or G.729 codec in SDP message for the media gateway.
The value 'true' means using Annex A and B in … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.318.1.2.1.1.25 |
| cXgcpMediaGwRequestRetryMethod This object specifies command retry method. | column | CXgcpRetryMethod | .1.3.6.1.4.1.9.9.318.1.2.1.1.3 |
| cXgcpMediaGwMaxExpTimeout This object specifies the maximum timeout for
exponential command retry by the media gateway. | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.318.1.2.1.1.4 |
| cXgcpMediaGwRestartMwd The maximum waiting delay (MWD) timeout value is used
for the media gateway to send the first Restart In
Progress to the MGC.
When a gateway is powered on, it sho… | column | milliseconds Integer32 | .1.3.6.1.4.1.9.9.318.1.2.1.1.5 |
| cXgcpMediaGwRestartDelay This object specifies the Restart Delay Timeout for
the restart process for a gateway to send out
RestartInProgress when it is powered on or
been reset.
The purpos… | column | seconds Integer32 | .1.3.6.1.4.1.9.9.318.1.2.1.1.6 |
| cXgcpMediaGwDefaultPackage This object represents the default capability package
supported in the gateway.
packageDC ( 1) - Don't Care package
packageG ( 2) - Generic package
packageD … | column | Enumeration | .1.3.6.1.4.1.9.9.318.1.2.1.1.7 |
| cXgcpMediaGwSupportedPackages This object represents the bit map of MGCP supported
packages.
Bit 0 - Not Found
Bit 1 - Package DC (Don't care package)
Bit 2 - Package G (Generic pa… | column | Bits | .1.3.6.1.4.1.9.9.318.1.2.1.1.8 |
| cXgcpMediaGwSimpleSdpEnabled This object is used to enable/disable building of
s, t, o lines in SDP message.
where o field indicates the owner/creator and session
identifier
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.318.1.2.1.1.9 |