cXgcpConnMode
CISCO-XGCP-MIB ·
.1.3.6.1.4.1.9.9.318.1.4.1.1.6
Object
column
Enumeration
Represents possible MG connection modes.
invalid - Invalid value for mode
sendOnly - The GW should only send packets
recvOnly - The GW should only receive packets
sendRecv - The GW can send and receive packets
inActive - The GW should neither send nor receive
packets
loopBack - The GW should place the circuit in loopback
mode
contTest - The GW should place the circuit in test mode
data - The GW should use the circuit for network
access for data
netwLoop - The GW should place the connection in
network loopback mode
netwTest - The GW should place the connection in
network continuity test mode
conference - The GW should place the connection in
conference mode.
Context
- MIB
- CISCO-XGCP-MIB
- OID
.1.3.6.1.4.1.9.9.318.1.4.1.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cXgcpConnectionEntry
- Table
- cXgcpConnectionTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | invalid |
1 | sendOnly |
2 | recvOnly |
3 | sendRecv |
4 | inActive |
5 | loopBack |
6 | contTest |
7 | data |
8 | netwLoop |
9 | netwTest |
10 | conference |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cXgcpConnId Connection ID generated by the gateway and sent in the
ACK message. | column | Unsigned32 | .1.3.6.1.4.1.9.9.318.1.4.1.1.1 |
| cXgcpConnCodec Specifies the codec type to be used with the Call.
The following codec types are defined:
notApplicable - no Codec Type is defined
g711ulaw - G.7… | column | Enumeration | .1.3.6.1.4.1.9.9.318.1.4.1.1.10 |
| cXgcpConnLastSuccEvent A call event is defined as something that happens to a call at a
given time. This object contains the latest MG call event
that was successful. | column | CXgcpCallEvent | .1.3.6.1.4.1.9.9.318.1.4.1.1.11 |
| cXgcpConnLastSuccIntEvent This object contains the latest MG internal call event
that was successful. | column | CXgcpCallEvent | .1.3.6.1.4.1.9.9.318.1.4.1.1.12 |
| cXgcpConnLastFailedEvent This object contains the latest MG call event that was
failed. | column | CXgcpCallEvent | .1.3.6.1.4.1.9.9.318.1.4.1.1.13 |
| cXgcpConnLastReqEvent This object contains the latest requested MG call event. | column | CXgcpCallEvent | .1.3.6.1.4.1.9.9.318.1.4.1.1.14 |
| cXgcpConnEventResult Represents possible MG call event results.
normalOk - Normal event processed OK
invalidOk - Invalid event processed OK
callRecordRele… | column | Enumeration | .1.3.6.1.4.1.9.9.318.1.4.1.1.15 |
| cXgcpConnEncrSuite Specifies what type of encryption suite is used to encode the
information sent through this connection.
none - No Encryption suite is used
aes128Cm - AES-128 co… | column | Enumeration | .1.3.6.1.4.1.9.9.318.1.4.1.1.16 |
| cXgcpConnEndPoint The physical or virtual entity that acts as a source or sink of data
in the MG is called an endpoint. Every end point in the MG is
assigned a textual name by the MG. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.318.1.4.1.1.2 |
| cXgcpConnCallId Call ID associated with this connection. Call ID is a parameter that
identifies the call to which this connection belongs to. A call ID is
unique within a VMG instance. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.318.1.4.1.1.3 |
| cXgcpConnLocalUdpPort The local UDP port used for the connection. | column | CISCO-TCCiscoPort | .1.3.6.1.4.1.9.9.318.1.4.1.1.4 |
| cXgcpConnRemoteUdpPort The remote UDP port used for the connection. | column | CISCO-TCCiscoPort | .1.3.6.1.4.1.9.9.318.1.4.1.1.5 |
| cXgcpConnVccId VCCI used for the VoAAL2 call. The object should have a non-zero
value only if the associated call is of VoAAL2 type. For all other
calls the value should be '0'. | column | Unsigned32 | .1.3.6.1.4.1.9.9.318.1.4.1.1.7 |
| cXgcpConnChannelId CID used for the VoAAL2 call. The object should have a non-zero
value only if the associated call is of VoAAL2 type. For all other
calls the value should be '0'. | column | Unsigned32 | .1.3.6.1.4.1.9.9.318.1.4.1.1.8 |
| cXgcpConnCallState Represents possible MG call states.
idle - Idle
setting - Incoming call from PSTN
connecting - CRCX message received
conferencing … | column | Enumeration | .1.3.6.1.4.1.9.9.318.1.4.1.1.9 |