cXgcpConnCodec

CISCO-XGCP-MIB · .1.3.6.1.4.1.9.9.318.1.4.1.1.10

Object

column Enumeration

Specifies the codec type to be used with the Call.
The following codec types are defined:
              
notApplicable        - no Codec Type is defined
g711ulaw             - G.711 mu-law
g711alaw             - G.711 A-law
g726k32             - G.726 32K
g726k24             - G.726 24K
g726k16             - G.726 16K
g729                 - G.729
g729a                - G.729-A
g729b                - G.729-B
g729bLowComp         - G.729-B Low Complexity
g728                 - G.728
g723                 - G.723
g7231HighRate        - G.723.1 High Rate
g7231aHighRate       - G.723.1 Annex A High Rate
g7231LowRate         - G.723.1 Low Rate
g7231aLowRate        - G.723.1 Annex A Low Rate
gsmFullRate          - GSM full rate
gsmHalfRate          - GSM half rate
gsmEnhancedFullRate  - GSM enhanced full rate
gsmEnhancedHalfRate  - GSM enhanced half rate
g729ab               - G.729-A-B.
clearChannel         - Nx64 clear channel
nse                  - For NSE
xnse                 - For X-NSE
nte                  - For telephone-event
t38                  - T-38
modemRelay           - Modem Relay
mdsteModemRelay      - For X+mdste
sse                  - For SSE
codecUnknown         - Unknown Codec

Context

MIB: CISCO-XGCP-MIB
OID: .1.3.6.1.4.1.9.9.318.1.4.1.1.10
Type: column
Access: readonly
Status: current
Parent: cXgcpConnectionEntry
Table: cXgcpConnectionTable
Siblings: 15

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	notApplicable
`1`	g711ulaw
`2`	g711alaw
`3`	g726k32
`4`	g726k24
`5`	g726k16
`6`	g729
`7`	g729a
`8`	g729b
`9`	g729bLowComp
`10`	g728
`11`	g723
`12`	g7231HighRate
`13`	g7231aHighRate
`14`	g7231LowRate
`15`	g7231aLowRate
`16`	gsmFullRate
`17`	gsmHalfRate
`18`	gsmEnhancedFullRate
`19`	gsmEnhancedHalfRate
`20`	g729ab
`128`	clearChannel
`129`	nse
`130`	xnse
`131`	nte
`132`	t38
`133`	modemRelay
`134`	mdsteModemRelay
`135`	sse
`200`	codecUnknown

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cXgcpConnId Connection ID generated by the gateway and sent in the ACK message.	column	Unsigned32	`.1.3.6.1.4.1.9.9.318.1.4.1.1.1`
cXgcpConnLastSuccEvent A call event is defined as something that happens to a call at a given time. This object contains the latest MG call event that was successful.	column	CXgcpCallEvent	`.1.3.6.1.4.1.9.9.318.1.4.1.1.11`
cXgcpConnLastSuccIntEvent This object contains the latest MG internal call event that was successful.	column	CXgcpCallEvent	`.1.3.6.1.4.1.9.9.318.1.4.1.1.12`
cXgcpConnLastFailedEvent This object contains the latest MG call event that was failed.	column	CXgcpCallEvent	`.1.3.6.1.4.1.9.9.318.1.4.1.1.13`
cXgcpConnLastReqEvent This object contains the latest requested MG call event.	column	CXgcpCallEvent	`.1.3.6.1.4.1.9.9.318.1.4.1.1.14`
cXgcpConnEventResult Represents possible MG call event results. normalOk - Normal event processed OK invalidOk - Invalid event processed OK callRecordRele…	column	Enumeration	`.1.3.6.1.4.1.9.9.318.1.4.1.1.15`
cXgcpConnEncrSuite Specifies what type of encryption suite is used to encode the information sent through this connection. none - No Encryption suite is used aes128Cm - AES-128 co…	column	Enumeration	`.1.3.6.1.4.1.9.9.318.1.4.1.1.16`
cXgcpConnEndPoint The physical or virtual entity that acts as a source or sink of data in the MG is called an endpoint. Every end point in the MG is assigned a textual name by the MG.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.318.1.4.1.1.2`
cXgcpConnCallId Call ID associated with this connection. Call ID is a parameter that identifies the call to which this connection belongs to. A call ID is unique within a VMG instance.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.4.1.9.9.318.1.4.1.1.3`
cXgcpConnLocalUdpPort The local UDP port used for the connection.	column	CISCO-TCCiscoPort	`.1.3.6.1.4.1.9.9.318.1.4.1.1.4`
cXgcpConnRemoteUdpPort The remote UDP port used for the connection.	column	CISCO-TCCiscoPort	`.1.3.6.1.4.1.9.9.318.1.4.1.1.5`
cXgcpConnMode Represents possible MG connection modes. invalid - Invalid value for mode sendOnly - The GW should only send packets recvOnly - The GW should only receive packets sendRe…	column	Enumeration	`.1.3.6.1.4.1.9.9.318.1.4.1.1.6`
cXgcpConnVccId VCCI used for the VoAAL2 call. The object should have a non-zero value only if the associated call is of VoAAL2 type. For all other calls the value should be '0'.	column	Unsigned32	`.1.3.6.1.4.1.9.9.318.1.4.1.1.7`
cXgcpConnChannelId CID used for the VoAAL2 call. The object should have a non-zero value only if the associated call is of VoAAL2 type. For all other calls the value should be '0'.	column	Unsigned32	`.1.3.6.1.4.1.9.9.318.1.4.1.1.8`
cXgcpConnCallState Represents possible MG call states. idle - Idle setting - Incoming call from PSTN connecting - CRCX message received conferencing …	column	Enumeration	`.1.3.6.1.4.1.9.9.318.1.4.1.1.9`