cXgcpConnCallState

CISCO-XGCP-MIB · .1.3.6.1.4.1.9.9.318.1.4.1.1.9
MIB view Table view

Object

column Enumeration 
Represents possible MG call states.
idle                   - Idle
setting                - Incoming call from PSTN
connecting             - CRCX message received
conferencing           - Call connected, await
                         conf
active                 - Conference created
confDestroying         - Destroying conference
disconnecting          - Conf destroyed, disconnect call
inactive               - call in inactive mode
voiceConnecting        - Creating telephony call leg only
voiceActive            - Telephony call leg created
confDissociating       - Destroying conf
callLegsDissociated    - Conf destroyed
hpConnecting           - connecting TDM hair-pin call leg
hpConnected            - one HP call leg connected
hpConferencing         - Conferencing TDM Hairpin call leg
hpActive               - TDM hair-pinning active state
voipConfDestroy        - Conf destroyed, make HP call
erroState              - call in error state
connectingInactive     - creating inactive connection
confDestroyingInactive - conf destroy inactive conn
confTest               - AAL2/IP continuity test
setupWait              - Waiting for setup information
waitNseSent            - Wait for NSE event to be sent
twcActive              - TWC call active
waitState              - App is waiting for call control
handOver               - App is grabbing back the control

Context

MIB
CISCO-XGCP-MIB
OID
.1.3.6.1.4.1.9.9.318.1.4.1.1.9
Type
column
Access
readonly
Status
current
Parent
cXgcpConnectionEntry
Table
cXgcpConnectionTable
Siblings
15

Syntax

Enumeration

Values & Constraints

Enumerated Values
0idle
1setting
2connecting
3conferencing
4active
5confDestroying
6disconnecting
7inactive
8voiceConnecting
9voiceActive
10confDissociating
11callLegsDissociated
12hpConnecting
13hpConnected
14hpConferencing
15hpActive
16voipConfDestroy
17erroState
18connectingInactive
19confDestroyingInactive
20confTest
21setupWait
22waitNseSent
23twcActive
24waitState
25handOver

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cXgcpConnId
Connection ID generated by the gateway and sent in the ACK message.
columnUnsigned32.1.3.6.1.4.1.9.9.318.1.4.1.1.1
cXgcpConnCodec
Specifies the codec type to be used with the Call. The following codec types are defined: notApplicable - no Codec Type is defined g711ulaw - G.7…
columnEnumeration.1.3.6.1.4.1.9.9.318.1.4.1.1.10
cXgcpConnLastSuccEvent
A call event is defined as something that happens to a call at a given time. This object contains the latest MG call event that was successful.
columnCXgcpCallEvent.1.3.6.1.4.1.9.9.318.1.4.1.1.11
cXgcpConnLastSuccIntEvent
This object contains the latest MG internal call event that was successful.
columnCXgcpCallEvent.1.3.6.1.4.1.9.9.318.1.4.1.1.12
cXgcpConnLastFailedEvent
This object contains the latest MG call event that was failed.
columnCXgcpCallEvent.1.3.6.1.4.1.9.9.318.1.4.1.1.13
cXgcpConnLastReqEvent
This object contains the latest requested MG call event.
columnCXgcpCallEvent.1.3.6.1.4.1.9.9.318.1.4.1.1.14
cXgcpConnEventResult
Represents possible MG call event results. normalOk - Normal event processed OK invalidOk - Invalid event processed OK callRecordRele…
columnEnumeration.1.3.6.1.4.1.9.9.318.1.4.1.1.15
cXgcpConnEncrSuite
Specifies what type of encryption suite is used to encode the information sent through this connection. none - No Encryption suite is used aes128Cm - AES-128 co…
columnEnumeration.1.3.6.1.4.1.9.9.318.1.4.1.1.16
cXgcpConnEndPoint
The physical or virtual entity that acts as a source or sink of data in the MG is called an endpoint. Every end point in the MG is assigned a textual name by the MG.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.318.1.4.1.1.2
cXgcpConnCallId
Call ID associated with this connection. Call ID is a parameter that identifies the call to which this connection belongs to. A call ID is unique within a VMG instance.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.318.1.4.1.1.3
cXgcpConnLocalUdpPort
The local UDP port used for the connection.
columnCISCO-TCCiscoPort.1.3.6.1.4.1.9.9.318.1.4.1.1.4
cXgcpConnRemoteUdpPort
The remote UDP port used for the connection.
columnCISCO-TCCiscoPort.1.3.6.1.4.1.9.9.318.1.4.1.1.5
cXgcpConnMode
Represents possible MG connection modes. invalid - Invalid value for mode sendOnly - The GW should only send packets recvOnly - The GW should only receive packets sendRe…
columnEnumeration.1.3.6.1.4.1.9.9.318.1.4.1.1.6
cXgcpConnVccId
VCCI used for the VoAAL2 call. The object should have a non-zero value only if the associated call is of VoAAL2 type. For all other calls the value should be '0'.
columnUnsigned32.1.3.6.1.4.1.9.9.318.1.4.1.1.7
cXgcpConnChannelId
CID used for the VoAAL2 call. The object should have a non-zero value only if the associated call is of VoAAL2 type. For all other calls the value should be '0'.
columnUnsigned32.1.3.6.1.4.1.9.9.318.1.4.1.1.8