cwtRowStatus
CISCO-WAN-TOPOLOGY-MIB ·
.1.3.6.1.4.1.9.9.234.1.2.1.1.15
Object
In our implementation, we'll be supporting 'active', 'createAndGo', and 'destroy'. The value of this variable is set to 'active' by the managed system for each valid entry. If a management station wants to delete an entry from the database, this value is set to 'destroy'. If a management station wants to create a new entry, this value is set to 'createAndGo'.
Context
- MIB
- CISCO-WAN-TOPOLOGY-MIB
- OID
.1.3.6.1.4.1.9.9.234.1.2.1.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cwtNodeInfoEntry
- Table
- cwtNodeInfoTable
- Siblings
- 14
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cwtIndex This is the index into the topology database array.
This value should remain persistent while the topology
database exists, which means that it'll be consistent
across boots. H… | column | CwtNodeInfoTableIndex | .1.3.6.1.4.1.9.9.234.1.2.1.1.1 |
| cwtSecIPIfName This object specifies the name of the interface for the
associated instance of cwtSecIP. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.234.1.2.1.1.10 |
| cwtSecIPAddrType This object specifies the type of address contained in the
associated instance of cwtSecIP. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.234.1.2.1.1.11 |
| cwtSecIP Secondary IP address of the corresponding node. This value
is taken from the PNNI Nodal PTSE. This value is used by
the NMS to manage the switch. Please refer to the
Descript… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.234.1.2.1.1.12 |
| cwtSysObjId This variable contains the sysObjectID of the node,
which is used to identify different hardware platforms.
The actual values are defined in CISCO-PRODUCTS-MIB. | column | ObjectIdentifier | .1.3.6.1.4.1.9.9.234.1.2.1.1.13 |
| cwtNodeInfoTimeOutFlag This variable indicates if the PTSE of this node
is currently contained in the PNNI PTSE database. The
nodal information in the persistent topology database
is derived from the… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.234.1.2.1.1.14 |
| cwtGatewayNodeFlag This variable indicates if the corresponding entry
is a Gateway Node or not. If this value contains
'true', the corresponding node is a Gateway Node.
If this value contains 'fal… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.234.1.2.1.1.2 |
| cwtNodeId The unique Id which identifies the node in the entry.
This value is different from cwtIndex because it is a
unique number which identifies a node in the ATM network,
while cwt… | column | PNNI-MIBPnniNodeId | .1.3.6.1.4.1.9.9.234.1.2.1.1.3 |
| cwtNodeName The configured name of the node. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.234.1.2.1.1.4 |
| cwtPrimIPIfType This object specifies the type of interface for the
associated instance of cwtPrimIP. | column | IANAifType-MIBIANAifType | .1.3.6.1.4.1.9.9.234.1.2.1.1.5 |
| cwtPrimIPIfName This object specifies the name of the interface for the
associated instance of cwtPrimIP. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.234.1.2.1.1.6 |
| cwtPrimIPAddrType This object specifies the type of address contained in the
associated instance of cwtPrimIP. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.234.1.2.1.1.7 |
| cwtPrimIP Primary IP address of the corresponding node. This value
is taken from the PNNI Nodal PTSE. The primary IP address is
used by the NMS to manage the switch. The type of interfa… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.234.1.2.1.1.8 |
| cwtSecIPIfType This object specifies the type of interface for the
associated instance of cwtSecIP. | column | IANAifType-MIBIANAifType | .1.3.6.1.4.1.9.9.234.1.2.1.1.9 |