cwtPrimIP

CISCO-WAN-TOPOLOGY-MIB · .1.3.6.1.4.1.9.9.234.1.2.1.1.8
MIB view Table view

Object

column r/w INET-ADDRESS-MIBInetAddress 
Primary IP address of the corresponding node.  This value 
is taken from the PNNI Nodal PTSE.  The primary IP address is
used by the NMS to manage the switch.  The type of interface
(i.e. ATM interface, LAN interface, etc) for this IP address
is specified by cwtPrimIPIfType.  The NMS will use this IP
address first, but if it can not connect to the switch on
this address, then it will try to contact the switch using
the secondary IP address instead.

Context

MIB
CISCO-WAN-TOPOLOGY-MIB
OID
.1.3.6.1.4.1.9.9.234.1.2.1.1.8
Type
column
Access
readwrite
Status
current
Parent
cwtNodeInfoEntry
Table
cwtNodeInfoTable
Siblings
14

Syntax

INET-ADDRESS-MIBInetAddress
Source
INET-ADDRESS-MIBInetAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cwtIndex
This is the index into the topology database array. This value should remain persistent while the topology database exists, which means that it'll be consistent across boots. H…
columnCwtNodeInfoTableIndex.1.3.6.1.4.1.9.9.234.1.2.1.1.1
cwtSecIPIfName
This object specifies the name of the interface for the associated instance of cwtSecIP.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.234.1.2.1.1.10
cwtSecIPAddrType
This object specifies the type of address contained in the associated instance of cwtSecIP.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.234.1.2.1.1.11
cwtSecIP
Secondary IP address of the corresponding node. This value is taken from the PNNI Nodal PTSE. This value is used by the NMS to manage the switch. Please refer to the Descript…
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.9.9.234.1.2.1.1.12
cwtSysObjId
This variable contains the sysObjectID of the node, which is used to identify different hardware platforms. The actual values are defined in CISCO-PRODUCTS-MIB.
columnObjectIdentifier.1.3.6.1.4.1.9.9.234.1.2.1.1.13
cwtNodeInfoTimeOutFlag
This variable indicates if the PTSE of this node is currently contained in the PNNI PTSE database. The nodal information in the persistent topology database is derived from the…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.234.1.2.1.1.14
cwtRowStatus
In our implementation, we'll be supporting 'active', 'createAndGo', and 'destroy'. The value of this variable is set to 'active' by the managed system for each valid entry. I…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.9.9.234.1.2.1.1.15
cwtGatewayNodeFlag
This variable indicates if the corresponding entry is a Gateway Node or not. If this value contains 'true', the corresponding node is a Gateway Node. If this value contains 'fal…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.234.1.2.1.1.2
cwtNodeId
The unique Id which identifies the node in the entry. This value is different from cwtIndex because it is a unique number which identifies a node in the ATM network, while cwt…
columnPNNI-MIBPnniNodeId.1.3.6.1.4.1.9.9.234.1.2.1.1.3
cwtNodeName
The configured name of the node.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.234.1.2.1.1.4
cwtPrimIPIfType
This object specifies the type of interface for the associated instance of cwtPrimIP.
columnIANAifType-MIBIANAifType.1.3.6.1.4.1.9.9.234.1.2.1.1.5
cwtPrimIPIfName
This object specifies the name of the interface for the associated instance of cwtPrimIP.
columnSNMP-FRAMEWORK-MIBSnmpAdminString.1.3.6.1.4.1.9.9.234.1.2.1.1.6
cwtPrimIPAddrType
This object specifies the type of address contained in the associated instance of cwtPrimIP.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.9.9.234.1.2.1.1.7
cwtSecIPIfType
This object specifies the type of interface for the associated instance of cwtSecIP.
columnIANAifType-MIBIANAifType.1.3.6.1.4.1.9.9.234.1.2.1.1.9