cwtFeederLMIType
CISCO-WAN-TOPOLOGY-MIB ·
.1.3.6.1.4.1.9.9.234.1.3.1.1.8
Object
column
Enumeration
This object identifies the 'link' type.
feeder(1) is applicable when cwtFeederType contains
a value other than fdrNON(12). xLMI(2) is applicable
only when cwtFeederType contains a value of fdrNON(12).
Both feeder(1) and xLMI(2) are CISCO proprietary
interfaces. xLMI stands for 'extended local management
interface.
Context
- MIB
- CISCO-WAN-TOPOLOGY-MIB
- OID
.1.3.6.1.4.1.9.9.234.1.3.1.1.8- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cwtFeederInfoEntry
- Table
- cwtFeederInfoTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | feeder |
2 | xLMI |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cwtFeederIndex This is the index into the feeder database array.
This value should remain persistent while the feeder
database exists, which means that it'll be consistent
across boots. However… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.234.1.3.1.1.1 |
| cwtFeederName The configured name of the feeder. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.234.1.3.1.1.10 |
| cwtFeederLanIPAddrType This object specifies the type of address contained
in the associated instance of cwtFeederLanIP. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.234.1.3.1.1.11 |
| cwtFeederLanIP This object specifies the LAN IP address of the
'feeder'. The type of this address is specified by
cwtFeederLanIPAddrType. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.234.1.3.1.1.12 |
| cwtFeederAtmIPAddrType This object specifies the type of address contained
in the associated instance of cwtFeederAtmIP. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.9.9.234.1.3.1.1.13 |
| cwtFeederAtmIP This object identifies the ATM IP address of the
'feeder'. The type of this address is specified by
cwtFeederAtmIP. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.9.9.234.1.3.1.1.14 |
| cwtFeederModelNumber This variable contains the 'model number' of the
corresponding feeder. This is an implementation specific
integer value which is used to differentiate between
feeder platforms. | column | Integer32 | .1.3.6.1.4.1.9.9.234.1.3.1.1.15 |
| cwtFeederRowStatus In our implementation, we'll be supporting 'active',
and 'destroy'. The value of this
variable is set to 'active' by the managed system for
each valid entry. If a management sta… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.234.1.3.1.1.16 |
| cwtLocalNodeId The unique Id which identifies the node the feeder is
attached to. | column | PNNI-MIBPnniNodeId | .1.3.6.1.4.1.9.9.234.1.3.1.1.2 |
| cwtLocalIfIndex This variable contains the 'ifIndex' of the
local port this feeder is connected to. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.234.1.3.1.1.3 |
| cwtLocalIfName The textual name of the interface of the local
port this feeder is connected to. This should
contain the same 'ifName' associated with the
'cwtLocalIfIndex'.
If t… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.234.1.3.1.1.4 |
| cwtFeederShelf This variable contains the physcial shelf
number of the feeder module. | column | Integer32 | .1.3.6.1.4.1.9.9.234.1.3.1.1.5 |
| cwtFeederSlot This variable contains the physical slot
number of the feeder module. | column | Integer32 | .1.3.6.1.4.1.9.9.234.1.3.1.1.6 |
| cwtFeederPort This variable contains the physical port
number of the feeder module. | column | Integer32 | .1.3.6.1.4.1.9.9.234.1.3.1.1.7 |
| cwtFeederType This identifies the feeder type. fdrNON(12) is applicable
when cwfLMIType is xLMI(2). Other values are applicable
when cwtFeederLMIType is feeder(1).
The possible values are :
fd… | column | Enumeration | .1.3.6.1.4.1.9.9.234.1.3.1.1.9 |