parTrkLineLoad
CISCO-WAN-PAR-MIB ·
.1.3.6.1.4.1.351.130.2.2.1.33
Object
column
SNMPv2-SMIInteger32
Specifies the bandwidth used by the connections routed over the trunk.
Context
- MIB
- CISCO-WAN-PAR-MIB
- OID
.1.3.6.1.4.1.351.130.2.2.1.33- Type
- column
- Access
- readonly
- Status
- current
- Parent
- parTrkEntry
- Table
- parTrkTable
- Siblings
- 32
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| parTrkId This object specifies the logical trunk number
associated with the trunk at the local node. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.2.2.1.1 |
| parTrkCnfgTrafficClassTs This object indicates whether Time Stamped
traffic can be routed over the trunk. If the value
is true(1) it can be rerouted otherwise not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.130.2.2.1.10 |
| parTrkCnfgTrafficClassVoice This object indicates whether Voice traffic
can be routed over the trunk. If the value is
true(1), it can be rerouted otherwise not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.130.2.2.1.11 |
| parTrkCnfgTrafficClassCbr This object indicates whether Constant Bit Rate
traffic can be routed over the trunk. If the value
is true(1), it can be rerouted otherwise not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.130.2.2.1.12 |
| parTrkCnfgTrafficClassVbr This object indicates whether Variable Bit Rate
traffic can be routed over the trunk. If the value
is true(1), it can be rerouted otherwise not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.130.2.2.1.13 |
| parTrkCnfgTrafficClassAbr This object indicates whether Available Bit Rate
traffic can be routed over the trunk. If the value
is true(1), it can be rerouted otherwise not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.130.2.2.1.14 |
| parTrkCnfgAdminStatus This object can be used to add or delete the trunk.
The value of this object can be set to add(1) only
if the parIfOperStatus is up(1). The value can be
set to delete if parIfO… | column | Enumeration | .1.3.6.1.4.1.351.130.2.2.1.15 |
| parTrkCnfgRoutingCost This object specifies the cost associated with
the trunk for the purpose of routing the connections.
This object has significance if cost based routing
feature is enabled(parCmP… | column | Integer32 | .1.3.6.1.4.1.351.130.2.2.1.16 |
| parTrkCnfgVccConids The maximum number of routing resource available
on the trunk for VCC connections. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.2.2.1.17 |
| parTrkCnfgVpcConids The maximum number of routing resource available
on the trunk for VPC connections | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.2.2.1.18 |
| parTrkLocalSlotNumber This object specifies the slot number of the
interface card associated with the trunk at the
local node. | column | Integer32 | .1.3.6.1.4.1.351.130.2.2.1.19 |
| parTrkStatReserve Specifies the bandwidth reserved as Statistical
Reserve on the trunk in units of cells per second.
This object cannot take a value beyond the bandwidth
capacity of the trunk. | column | cells-per-second SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.2.2.1.2 |
| parTrkLocalPortNumber This object specifies the port number of the interface card
associated with the trunk at the local node. | column | Integer32 | .1.3.6.1.4.1.351.130.2.2.1.20 |
| parTrkLocalVTrunkId This object specifies the Virtual trunk of the
interface card associated with the trunk at the
local node. The value of this object is between
1 and 254, inclusive for a virtua… | column | Integer32 | .1.3.6.1.4.1.351.130.2.2.1.21 |
| parTrkRemoteNodeId This object specifies the node number of the
node attached to the remote end of the trunk. | column | Integer32 | .1.3.6.1.4.1.351.130.2.2.1.22 |
| parTrkRemoteTrunkId This object specifies the logical trunk number
at the node on the remote end of the trunk. | column | Integer32 | .1.3.6.1.4.1.351.130.2.2.1.23 |
| parTrkRemoteSlotNumber This object specifies the slot number of the
interface card to which the trunk is attached
on the remote node. | column | Integer32 | .1.3.6.1.4.1.351.130.2.2.1.24 |
| parTrkRemotePortNumber This object specifies the port number of the
interface card to which the trunk is attached
on the remote node. | column | Integer32 | .1.3.6.1.4.1.351.130.2.2.1.25 |
| parTrkRemoteVTrunkId This object specifies the Virtual trunk of the
interface card associated with the trunk at the
remote node. The value of this object is between
1 and 254, inclusive for a virtu… | column | Integer32 | .1.3.6.1.4.1.351.130.2.2.1.26 |
| parTrkRemoteNodeIP This object specifies the IP address for the
Remote node, used for communication with NMS | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.351.130.2.2.1.27 |
| parTrkRemoteNodeType Specifies the type of the node. | column | Enumeration | .1.3.6.1.4.1.351.130.2.2.1.28 |
| parTrkRemoteNodeName This object specifies the name of the remote
node and is unique among all the nodes in the network. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.351.130.2.2.1.29 |
| parTrkCnfgCcRestrict This object specifies the operators preference for
routing control plane traffic on the interface.
If the object is set to False, then the interface may
be chosen for control pl… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.130.2.2.1.3 |
| parTrkAlarmStatus This object specifies the severity of the alarm
on the trunk.
clear(1) : No Alarm
minor(2) : Minor Alarm
major(3) : Major Alarm. | column | Enumeration | .1.3.6.1.4.1.351.130.2.2.1.30 |
| parTrkAlarmType This object specifies the type of alarm on
the trunk. The value of this object has no
significance if parTrunkAlarmStatus indicates no alarm.
rsrcunavail(1) : re… | column | Enumeration | .1.3.6.1.4.1.351.130.2.2.1.31 |
| parTrkBwCapacity Specifies the bandwidth capacity of the trunk. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.2.2.1.32 |
| parTrkCnfgLineType This object specifies the type of interface terrestrial
or satellite. The interfaces configured as terrestrial(1)
are preferred over those configured as satellite(2) for
routin… | column | Enumeration | .1.3.6.1.4.1.351.130.2.2.1.4 |
| parTrkCnfgPassSync This object specifies whether the trunk can be
used to pass clock sync.
If the value of this object is True, clock can be
synchronized through the trunk; otherwise not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.130.2.2.1.5 |
| parTrkCnfgDerouteDelay This object specifies the value of deroute delay
timer in seconds. | column | seconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.2.2.1.6 |
| parTrkCnfgTrafficClassFst This object indicates whether Foresight traffic
can be routed over the trunk. If the value is true(1),
it can be rerouted otherwise not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.130.2.2.1.7 |
| parTrkCnfgTrafficClassFr This object indicates whether Frame Relay traffic
can be routed over the trunk. If the value is true(1),
it can be rerouted otherwise not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.130.2.2.1.8 |
| parTrkCnfgTrafficClassNts This object indicates whether Non-Time Stamped
traffic can be routed over the trunk. If the value
is true(1) it can be rerouted otherwise not. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.130.2.2.1.9 |