parNetParmHighTxRate

CISCO-WAN-PAR-MIB · .1.3.6.1.4.1.351.130.5.7.15
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
This object specifies the rate 
(in fast packets per second) at which the 
network handler sends control plane message cells 
 to high performance nodes 
(High performance node are BPX and MGX).

Context

MIB
CISCO-WAN-PAR-MIB
OID
.1.3.6.1.4.1.351.130.5.7.15
Type
scalar
Access
readwrite
Status
current
Parent
parNetworkingParms
Siblings
17

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
parNetParmCondInitialStgr
This object specifies the initial pause time (in milliseconds) per new node added on addition of node(s) in the network before initiating conditional updates.
scalarmilliseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.1
parNetParmCfTestInterval
This object specifies the minimum time interval between the comm fail tests for a trunk.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.10
parNetParmCfTestMultiplier
This object specifies the multiplier for the comm fail test interval for good trunks, that is, trunks not in comm fail.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.11
parNetParmNetwWindowSz
This object specifies the window size for the network handler for messages to any node. That is, the number of messages that the network handler can send simultaneous to a node …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.12
parNetParmNetwLetWait
This object specifies the maximum interval (in milliseconds) network handler waits for the letter (message) from the processes running on its nodes before checking the received…
scalarmilliseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.13
parNetParmCfDelay
TBD (in milliseconds).
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.14
parNetParmLowTxRate
This object specifies the rate (in fast packets per second) at which the network handler sends control plane message cells to low capacity nodes (Low capacity node are IPX and…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.16
parNetParmMaxNodeBlks
This object specifies the maximum number of blocks of size 256 bytes, that should be queued up for transmission to a node.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.17
parNetParmTopoMsgSegSz
This object specifies the maximum size (in bytes) of the segment into which the topology message, sent during network join, is divided.
scalarbytes SNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.18
parNetParmCondPerNodeInterval
This object specifies the minimum interval (in milliseconds) between sending of conditional updates to any two nodes.
scalarmilliseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.2
parNetParmCbDelay
This object specifies the minimum interval (in milliseconds) between initiating comm break tests between any two nodes.
scalarmilliseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.3
parNetParmCbOffset
Offset for CB.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.4
parNetParmMsgTimeout
This object specifies the timeout (in milliseconds) for acknowledgment for control plane message sent to another node.
scalarmilliseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.5
parNetParmMsgMaxTimeout
This object specifies the maximum number of times a network handler timeout waiting for acknowledgment for control plane message sent to another node reachable through all ter…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.6
parNetParmMsgMaxTimeoutSat
This object specifies the maximum number of times a network handler timeout waiting for acknowledgment for control plane message sent to another node reachable through all sat…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.7
parNetParmBlindMaxTimeout
This object specifies the maximum number of times a network handler timeout waiting for acknowledgment for control plane blind message sent to another node.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.8
parNetParmCbMaxTimeout
This object specifies the maximum number of times a network handler timeout waiting for acknowledgment for comm break test message sent to another node.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.351.130.5.7.9