parCmParmsRrtCycleInterval
CISCO-WAN-PAR-MIB ·
.1.3.6.1.4.1.351.130.5.2.7
Object
This object specifies the time (in minutes) for which no attempt is made to route a connection in the wait group.
Context
- MIB
- CISCO-WAN-PAR-MIB
- OID
.1.3.6.1.4.1.351.130.5.2.7- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- minutes
- Parent
- parCmParms
- Siblings
- 16
Syntax
minutes SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| parCmParmsMaxRoutingBundle This object specifies the maximum number of
connections that can be routed in one routing cycle. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.5.2.1 |
| parCmParmsMaxUpdates This object specifies the maximum number of
connection management updates that are sent by
the node in schedule.. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.5.2.10 |
| parCmParmsRerouteGroups This object specifies the total number of
reroute groups. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.5.2.11 |
| parCmParmsMinRrGroupSize This object specifies the minimum size of
reroute group in Cell Load Units. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.5.2.12 |
| parCmParmsRrGroupInc This object specifies the increment of
reroute group size (in Cell Load Units)
between adjacent groups. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.5.2.13 |
| parCmParmsCostBased This object can be configured to enable
or disable cost based routing feature.
If the value of this object is true(1),
the feature is enabled else it is disabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.130.5.2.14 |
| parCmParmsUseCache This object can be configured to enable or disable
hop based route selection from using cache of
precomputed routes.
If the value of this object is true(1), the feature is
en… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.130.5.2.15 |
| parCmParmsUseDelay This object can be configured to enable
or disable cost based route selection from
considering end-to-end delay associated with
the routes. If the value of this object is true(… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.130.5.2.16 |
| parCmParmMaxViaCons This object specifies the maximum number of
via user connections that can be routed through
the node. | scalar | Integer32 | .1.3.6.1.4.1.351.130.5.2.17 |
| parCmParmsRerouteTimer This object specifies the minimum time after
which a connection is routed once it has been
successfully routed. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.5.2.2 |
| parCmParmsResetTimer This object specifies whether the reroute timer
should be reset if the path for routed connection
failed. If the value of the object is true(1), the
timer is reset on detectin… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.351.130.5.2.3 |
| parCmParmsDnUpPerPass This object specifies the maximum number of
connections that are upped or down in one schedule
of down connection state machine. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.5.2.4 |
| parCmParmsDnUpTimer This object specifies the minimum time interval
(in milliseconds) between two schedules of the down
connection state machine. | scalar | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.5.2.5 |
| parCmParmsRrtErrsPerCycle This object specifies the threshold for number
of failures to route a connection before it is
moved into the wait group. If the value of this
object is zero, the feature is dis… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.5.2.6 |
| parCmParmsMaxRrtCycles This object specifies the number of times a
connection is added to the wait group before
declaring it unroutable. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.5.2.8 |
| parCmParmsRrtPauseTime This object specifies the time interval
(in milliseconds) between two routing cycles. | scalar | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.130.5.2.9 |