vismLapdType

CISCO-WAN-LAPD-TRUNK-MIB · .1.3.6.1.4.1.351.110.5.5.12.1.1.7

Object

column r/w Enumeration

This object specifies what type of interface the LAPD stack
will be used with.
        ccitt(1)        : CCITT
        att5EssPRA(3)   : AT&T 5ESS PRA
        att4Ess(4)      : AT&T 4ESS
        ntDMS100PRA(6)  : NT dms100 PRA
        vn2or3(7)       : VN 2 or VN 3
        insNet(8)       : INS Net
        tr6MPC(9)       : tr6 MPC
        tr6PBX(10)      : tr6 PBX
        ausp(12)        : Austel Primary
        ni1(13)         : National ISDN-1
        etsi(14)        : ETSI
        bc303TMC(15)    : Bellcorp tr303 tmc
        bc303CSC(16)    : Bellcorp tr303 csc
        ntDMS250(17)    : NT dms250
        bellcore(18)    : Bellcore
        ni2(19)         : National ISDN-2

Context

MIB: CISCO-WAN-LAPD-TRUNK-MIB
OID: .1.3.6.1.4.1.351.110.5.5.12.1.1.7
Type: column
Access: readwrite
Status: current
Parent: vismLapdEntry
Table: vismLapdTable
Siblings: 9

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	ccitt
`3`	att5EssPRA
`4`	att4Ess
`6`	ntDMS100PRA
`7`	vn2or3
`8`	insNet
`9`	tr6MPC
`10`	tr6PBX
`12`	ausp
`13`	ni1
`14`	etsi
`15`	bc303TMC
`16`	bc303CSC
`17`	ntDMS250
`18`	bellcore
`19`	ni2

Related Objects

Sibling Objects

Object	Type	Syntax	OID
vismLapdIndex This is an index to vismLapdTable. This is derived from the following formula: index = 31 * (DS1# - 1) + DS0# where : DS1# - The T1/E1 line number in the range 1 - …	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.12.1.1.1`
vismLapdTrunkType This object indicates if the line is configured for Trunking or PRI Backhaul. This object is set to the appropriate type when the vismRudpSessionType (defined in CISCO-VISM-SESSI…	column	Enumeration	`.1.3.6.1.4.1.351.110.5.5.12.1.1.10`
vismLapdAppType This object indicates the type of the LAPD interface. When the user creates a LAPD entry this object need to be specified. After creation it cannot be modified. '…	column	Enumeration	`.1.3.6.1.4.1.351.110.5.5.12.1.1.2`
vismLapdWinSize The window size - maximum number of sequentially numbered I-frames that may be outstanding.	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.12.1.1.3`
vismLapdN200 The maximum number of retransmissions of a frame.	column	Integer32	`.1.3.6.1.4.1.351.110.5.5.12.1.1.4`
vismLapdT200 The maximum number of time in milliseconds to wait for acknowledgement for a transmit frame. This value should be less than vismLapdT203. For PRI, the range is 1000 ms to 1023000…	column	milliseconds Integer32	`.1.3.6.1.4.1.351.110.5.5.12.1.1.5`
vismLapdT203 The maximum time (in milliseconds) allowed without frames being exchanged. This value should be greater than vismLapdT200. For PRI, the range is 1000 to 1023000 and the default…	column	milliseconds Integer32	`.1.3.6.1.4.1.351.110.5.5.12.1.1.6`
vismLapdRowStatus Row status allows users to create or delete a LAPD entry. 'createAndGo' - this option is use to create an entry in the table. Before a LAPD entry is created, the session manager …	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.351.110.5.5.12.1.1.8`
vismLapdSide This object specifies whether LAPD stack is on the user side or network side. This object can be set when the row is created. It cannot be modified for an existing row.	column	Enumeration	`.1.3.6.1.4.1.351.110.5.5.12.1.1.9`