vismLapdTrunkType
CISCO-WAN-LAPD-TRUNK-MIB ·
.1.3.6.1.4.1.351.110.5.5.12.1.1.10
Object
column
Enumeration
This object indicates if the line is configured for Trunking or PRI Backhaul. This object is set to the appropriate type when the vismRudpSessionType (defined in CISCO-VISM-SESSION-MIB MIB) parameter in the vismRudpSessionCnfEntry(specify in the same MIB) table is set. The motivation to have similar such objects at two places is for convenience.
Context
- MIB
- CISCO-WAN-LAPD-TRUNK-MIB
- OID
.1.3.6.1.4.1.351.110.5.5.12.1.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vismLapdEntry
- Table
- vismLapdTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | backhaul |
2 | lapdTrunking |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vismLapdIndex This is an index to vismLapdTable. This is derived
from the following formula:
index = 31 * (DS1# - 1) + DS0#
where : DS1# - The T1/E1 line number in the range 1 - … | column | Integer32 | .1.3.6.1.4.1.351.110.5.5.12.1.1.1 |
| vismLapdAppType This object indicates the type of the LAPD interface.
When the user creates a LAPD entry this object need
to be specified. After creation it cannot be modified.
'… | column | Enumeration | .1.3.6.1.4.1.351.110.5.5.12.1.1.2 |
| vismLapdWinSize The window size - maximum number of sequentially
numbered I-frames that may be outstanding. | column | Integer32 | .1.3.6.1.4.1.351.110.5.5.12.1.1.3 |
| vismLapdN200 The maximum number of retransmissions of a frame. | column | Integer32 | .1.3.6.1.4.1.351.110.5.5.12.1.1.4 |
| vismLapdT200 The maximum number of time in milliseconds to wait for
acknowledgement for a transmit frame. This value should
be less than vismLapdT203.
For PRI, the range is 1000 ms to 1023000… | column | milliseconds Integer32 | .1.3.6.1.4.1.351.110.5.5.12.1.1.5 |
| vismLapdT203 The maximum time (in milliseconds) allowed without
frames being exchanged. This value should be greater
than vismLapdT200. For PRI, the range is 1000 to 1023000
and the default… | column | milliseconds Integer32 | .1.3.6.1.4.1.351.110.5.5.12.1.1.6 |
| vismLapdType This object specifies what type of interface the LAPD stack
will be used with.
ccitt(1) : CCITT
att5EssPRA(3) : AT&T 5ESS PRA
att4Ess(4) : AT… | column | Enumeration | .1.3.6.1.4.1.351.110.5.5.12.1.1.7 |
| vismLapdRowStatus Row status allows users to create or delete a LAPD entry.
'createAndGo' - this option is use to create an entry in the
table. Before a LAPD entry is created, the session manager
… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.351.110.5.5.12.1.1.8 |
| vismLapdSide This object specifies whether LAPD stack is on the
user side or network side.
This object can be set when the row is created. It
cannot be modified for an existing row. | column | Enumeration | .1.3.6.1.4.1.351.110.5.5.12.1.1.9 |