frstdABRRIF
CISCO-WAN-FR-CONN-MIB ·
.1.3.6.1.4.1.351.110.5.1.2.1.3.1.5
Object
column
r/w
Integer32
The value of this object is equal to
Rate Increase Factor(RIF). The RIF controls the
rate increase which occurs when a backward RM-cell
is received with CI=0 and NI=0.
The value specified has to be inverted to arrive
at the actual value.
The valid values possible are only powers
of 2; i.e. 1, 2, 4, 8 ..... 32768.
The SNMP agent has to verify this
compliance.
Context
- MIB
- CISCO-WAN-FR-CONN-MIB
- OID
.1.3.6.1.4.1.351.110.5.1.2.1.3.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- frstdABRCnfGrpEntry
- Table
- frstdABRCnfGrpTable
- Siblings
- 11
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-32768
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| frstdABRcnfChanNum Refers to the virtual connection index.
The value supported depends upon the type
of service module.
Supported Range for different Card Types:
… | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.2.1.3.1.1 |
| frstdABRICR The value of this object is equal to
Initial Cell Rate(ICR). The ICR is the rate at which
the source should send initially and after an idle period.
This includes the bandwidth a… | column | cells-per-second Integer32 | .1.3.6.1.4.1.351.110.5.1.2.1.3.1.10 |
| frstdABRMCR The value of this object is equal to
Minimum Cell Rate(MCR). The MCR is the rate at which
the source is allowed to send. This includes the bandwidth
allocated for both data cells… | column | cells-per-second Integer32 | .1.3.6.1.4.1.351.110.5.1.2.1.3.1.11 |
| frstdABRPCR The value of this object is equal to
Peak Cell Rate(PCR). The PCR is the rate at which
the source is allowed to send. This includes the
bandwidth allocated for both data cells as… | column | cells-per-second Integer32 | .1.3.6.1.4.1.351.110.5.1.2.1.3.1.12 |
| frstdABRTBE The value of this object is equal to
Transient Buffer Exposure(TBE). The TBE is a negotiated
number of cells that the network would like to limit
the source to sending during star… | column | cells Integer32 | .1.3.6.1.4.1.351.110.5.1.2.1.3.1.2 |
| frstdABRFRTT The value of this object is equal to
Fixed Round-Trip Time(FRTT). The FRTT is
sum of the fixed propogation delays from
the source to a destination network.
The Val… | column | milli-seconds Integer32 | .1.3.6.1.4.1.351.110.5.1.2.1.3.1.3 |
| frstdABRRDF The value of this object is equal to
Rate Decrease Factor(RDF). The RDF controls the
rate decrease which occurs when backward RM-cells
with CI=1 are received. Larger values lead t… | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.2.1.3.1.4 |
| frstdABRNrm The value of this object is equal to
number of cells a source may send for each
forward RM cell.
The valid values possible are only powers of 2
starting from 2; i.e. 2, 4, 8 .....… | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.2.1.3.1.6 |
| frstdABRTrm The value of this object is equal to
Upper bound on the time between forward RM
cells for an active source. | column | milli-seconds Integer32 | .1.3.6.1.4.1.351.110.5.1.2.1.3.1.7 |
| frstdABRCDF The value of this object is equal to
Cutoff Decrease Factor(CDF). The value specified
has to be inverted to arrive at the actual value.
The valid values possible are 0
and only po… | column | Integer32 | .1.3.6.1.4.1.351.110.5.1.2.1.3.1.8 |
| frstdABRADTF The value of this object is equal to
ACR Decrease Time Factor(ADTF).
The Granularity allowed is 10 milli seconds.
i.e. 10,20,30 etc.
The SNMP agent has to verify this compliance. | column | milli-seconds Integer32 | .1.3.6.1.4.1.351.110.5.1.2.1.3.1.9 |