cesmResPartRowStatus
CISCO-WAN-CES-RSRC-PART-MIB ·
.1.3.6.1.4.1.351.110.5.3.1.2.1.1.3
Object
column
r/w
Enumeration
This object is used for adding/deleting/modifying
resource partition on a CES port.
In MGX Release 1.x:
To add an entry, this object should be set to
add(1), value for other objects should not be
specified.
In MGX Release 2.x:
To add an entry, this object should be set to add(1).
To delete an entry, this object has to be set to del(2).
The resource partition can be deleted only after
deleting all the connections (LCNs).
Context
- MIB
- CISCO-WAN-CES-RSRC-PART-MIB
- OID
.1.3.6.1.4.1.351.110.5.3.1.2.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- cesmPortCnfResPartGrpEntry
- Table
- cesmPortCnfResPartGrpTable
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | add |
2 | del |
3 | mod |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cesmResPartPortNum The value of this object identifies the CES port.
The value of this object must be same as the value
of 'cesPortNum' from cesmPortCnfGrpTable. | column | Integer32 | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.1 |
| cesmResPartCtrlrNum This object identifies the controller
which can be used for accessing the resources.
The possible values are :
par(1) : Portable Auto Route controller.
… | column | Enumeration | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.2 |
| cesmResPartNumOfLcnAvail This represents number of LCNs available for this
controller and this port.
In CESM-T3/E3 and 8-T1/E1,this value is 1. | column | Integer32 | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.4 |
| cesmResPartLcnLow This represents low end of reserved LCN
In CESM-8T1/E1 and T3/E3, this refers to the
logical port. | column | Integer32 | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.5 |
| cesmResPartLcnHigh This represents high end of reserved LCN
In CESM-8T1/E1 and T3/E3, this refers to the
logical port. | column | Integer32 | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.6 |
| cesmResPartIngrPctBW The percentage of total ingress bandwidth reserved.
In CESM-8T1/E1 and T3/E3, as
there is only one LCN per port and it could be
used by only one controller,this value is
100% for … | column | Integer32 | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.7 |
| cesmResPartEgrPctBW The percentage of total egress bandwidth reserved
In CESM-8T1/E1 and T3/E3, as
there is only one LCN per port and it could be
used by only one controller,this value is
100% for t… | column | Integer32 | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.8 |
| cesmResPartCtrlrID This is the controller identifier for the resource patition.
The default value is set for PNNI controller. | column | Integer32 | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.9 |