cesmResPartPortNum
CISCO-WAN-CES-RSRC-PART-MIB ·
.1.3.6.1.4.1.351.110.5.3.1.2.1.1.1
Object
column
Integer32
The value of this object identifies the CES port. The value of this object must be same as the value of 'cesPortNum' from cesmPortCnfGrpTable.
Context
- MIB
- CISCO-WAN-CES-RSRC-PART-MIB
- OID
.1.3.6.1.4.1.351.110.5.3.1.2.1.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cesmPortCnfResPartGrpEntry
- Table
- cesmPortCnfResPartGrpTable
- Siblings
- 8
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-2048
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cesmResPartCtrlrNum This object identifies the controller
which can be used for accessing the resources.
The possible values are :
par(1) : Portable Auto Route controller.
… | column | Enumeration | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.2 |
| cesmResPartRowStatus This object is used for adding/deleting/modifying
resource partition on a CES port.
In MGX Release 1.x:
To add an entry, this object should be set to
add(1… | column | Enumeration | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.3 |
| cesmResPartNumOfLcnAvail This represents number of LCNs available for this
controller and this port.
In CESM-T3/E3 and 8-T1/E1,this value is 1. | column | Integer32 | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.4 |
| cesmResPartLcnLow This represents low end of reserved LCN
In CESM-8T1/E1 and T3/E3, this refers to the
logical port. | column | Integer32 | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.5 |
| cesmResPartLcnHigh This represents high end of reserved LCN
In CESM-8T1/E1 and T3/E3, this refers to the
logical port. | column | Integer32 | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.6 |
| cesmResPartIngrPctBW The percentage of total ingress bandwidth reserved.
In CESM-8T1/E1 and T3/E3, as
there is only one LCN per port and it could be
used by only one controller,this value is
100% for … | column | Integer32 | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.7 |
| cesmResPartEgrPctBW The percentage of total egress bandwidth reserved
In CESM-8T1/E1 and T3/E3, as
there is only one LCN per port and it could be
used by only one controller,this value is
100% for t… | column | Integer32 | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.8 |
| cesmResPartCtrlrID This is the controller identifier for the resource patition.
The default value is set for PNNI controller. | column | Integer32 | .1.3.6.1.4.1.351.110.5.3.1.2.1.1.9 |