c3gGsmTotalByteReceived

CISCO-WAN-3G-MIB · .1.3.6.1.4.1.9.9.661.1.3.2.1.20

MIB view Table view

Object

column bytes SNMPv2-SMICounter64

Total number of bytes received for all calls.  It is the total
number of bytes received by modem, not to be confused with the
number of bytes received from the interface.

Context

MIB: CISCO-WAN-3G-MIB
OID: .1.3.6.1.4.1.9.9.661.1.3.2.1.20
Type: column
Access: readonly
Status: current
Units: bytes
Parent: c3gGsmNetworkEntry
Table: c3gGsmNetworkTable
Siblings: 19

Syntax

bytes SNMPv2-SMICounter64

Source: SNMPv2-SMICounter64
Base type: Unsigned64

Values & Constraints

Type Constraints

range: 0..18446744073709551615

Related Objects

Sibling Objects

Object	Type	Syntax	OID
c3gGsmLac Location Area Code (LAC), also called as Tracking Area Code (TAC) in LTE standard. LAC/TAC is given by the base station.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.661.1.3.2.1.1`
c3gGsmMcc Mobile Country Code (MCC). Value of '-1' indicates MCC is 'Not Applicable'.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.9.9.661.1.3.2.1.10`
c3gGsmMnc Mobile Network Code (MNC). Value of '-1' indicates MNC is 'Not Applicable'.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.9.9.661.1.3.2.1.11`
c3gGsmRac Routing Area Code (RAC). RAC is given by the base station.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.661.1.3.2.1.12`
c3gGsmCurrentCellId Cell Identifier of current cell. Cell ID is given by the base station.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.661.1.3.2.1.13`
c3gGsmCurrentPrimaryScramblingCode Primary scrambling code of current cell. The primary scrambling code is typically identified through symbol-by-symbol correlation over the CPICH (Common Pilot Channel) with all…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.9.661.1.3.2.1.14`
c3gGsmPlmnSelection Public Land Mobile Network (PLMN) selection. Can be manual selection mode or automatic selection mode. Set to automatic by default.	column	Enumeration	`.1.3.6.1.4.1.9.9.661.1.3.2.1.15`
c3gGsmRegPlmn Registered PLMN.	column	OctetString	`.1.3.6.1.4.1.9.9.661.1.3.2.1.16`
c3gGsmPlmnAbbr PLMN abbreviated number.	column	OctetString	`.1.3.6.1.4.1.9.9.661.1.3.2.1.17`
c3gGsmServiceProvider Service provider.	column	OctetString	`.1.3.6.1.4.1.9.9.661.1.3.2.1.18`
c3gGsmTotalByteTransmitted Total number of bytes transmitted for all calls. It is the total number of bytes transmitted by modem, not to be confused with the number of bytes transmitted through the interfa…	column	bytes SNMPv2-SMICounter64	`.1.3.6.1.4.1.9.9.661.1.3.2.1.19`
c3gGsmCurrentServiceStatus Current Service Status: unknown(1) - current service status is unknown noService(2) - no service normal(3) - service status is normal emergencyOnly(4) - emergency…	column	Enumeration	`.1.3.6.1.4.1.9.9.661.1.3.2.1.2`
c3gGsmCurrentServiceError Current service error: unknown(1) - Unknown none(2) - None imsiUnknownInHlr(3) - IMSI unknown in HLR (Home …	column	Enumeration	`.1.3.6.1.4.1.9.9.661.1.3.2.1.3`
c3gGsmCurrentService Current service type: unknown(1) - service type is unknown invalid(2) - no service circuitSwitched(3) - circuit switched service packetSwitched(4) - packet switch…	column	Enumeration	`.1.3.6.1.4.1.9.9.661.1.3.2.1.4`
c3gGsmPacketService Packet Service type: unknown(1) - service type is unknown. none(2) - no service. gprs(3) - General Packet Radio Service (GPRS). edge(4) - Enhanced Data rates for …	column	Enumeration	`.1.3.6.1.4.1.9.9.661.1.3.2.1.5`
c3gGsmCurrentRoamingStatus This object indicates whether the modem is in the home network or is roaming.	column	Enumeration	`.1.3.6.1.4.1.9.9.661.1.3.2.1.6`
c3gGsmNetworkSelectionMode Network selection mode. Can be manual selection mode or automatic selection mode. Set to automatic by default.	column	Enumeration	`.1.3.6.1.4.1.9.9.661.1.3.2.1.7`
c3gGsmCountry Country code. Country code string is given by the base station.	column	OctetString	`.1.3.6.1.4.1.9.9.661.1.3.2.1.8`
c3gGsmNetwork Network code. Network Code string is given by the base station.	column	OctetString	`.1.3.6.1.4.1.9.9.661.1.3.2.1.9`