c3gGsmNetwork
CISCO-WAN-3G-MIB ·
.1.3.6.1.4.1.9.9.661.1.3.2.1.9
Object
column
OctetString
Network code. Network Code string is given by the base station.
Context
- MIB
- CISCO-WAN-3G-MIB
- OID
.1.3.6.1.4.1.9.9.661.1.3.2.1.9- Type
- column
- Access
- readonly
- Status
- current
- Parent
- c3gGsmNetworkEntry
- Table
- c3gGsmNetworkTable
- Siblings
- 19
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| c3gGsmLac Location Area Code (LAC), also called as Tracking
Area Code (TAC) in LTE standard. LAC/TAC is given
by the base station. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.661.1.3.2.1.1 |
| c3gGsmMcc Mobile Country Code (MCC). Value of '-1' indicates MCC is 'Not
Applicable'. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.661.1.3.2.1.10 |
| c3gGsmMnc Mobile Network Code (MNC). Value of '-1' indicates MNC is 'Not
Applicable'. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.661.1.3.2.1.11 |
| c3gGsmRac Routing Area Code (RAC). RAC is given by the base station. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.661.1.3.2.1.12 |
| c3gGsmCurrentCellId Cell Identifier of current cell. Cell ID is given by the
base station. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.661.1.3.2.1.13 |
| c3gGsmCurrentPrimaryScramblingCode Primary scrambling code of current cell. The primary
scrambling code is typically identified through
symbol-by-symbol correlation over the CPICH (Common Pilot
Channel) with all… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.661.1.3.2.1.14 |
| c3gGsmPlmnSelection Public Land Mobile Network (PLMN) selection. Can be manual
selection mode or automatic selection mode. Set to automatic by
default. | column | Enumeration | .1.3.6.1.4.1.9.9.661.1.3.2.1.15 |
| c3gGsmRegPlmn Registered PLMN. | column | OctetString | .1.3.6.1.4.1.9.9.661.1.3.2.1.16 |
| c3gGsmPlmnAbbr PLMN abbreviated number. | column | OctetString | .1.3.6.1.4.1.9.9.661.1.3.2.1.17 |
| c3gGsmServiceProvider Service provider. | column | OctetString | .1.3.6.1.4.1.9.9.661.1.3.2.1.18 |
| c3gGsmTotalByteTransmitted Total number of bytes transmitted for all calls. It is the
total number of bytes transmitted by modem, not to be confused
with the number of bytes transmitted through the interfa… | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.9.661.1.3.2.1.19 |
| c3gGsmCurrentServiceStatus Current Service Status:
unknown(1) - current service status is unknown
noService(2) - no service
normal(3) - service status is normal
emergencyOnly(4) - emergency… | column | Enumeration | .1.3.6.1.4.1.9.9.661.1.3.2.1.2 |
| c3gGsmTotalByteReceived Total number of bytes received for all calls. It is the total
number of bytes received by modem, not to be confused with the
number of bytes received from the interface. | column | bytes SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.9.661.1.3.2.1.20 |
| c3gGsmCurrentServiceError Current service error:
unknown(1) - Unknown
none(2) - None
imsiUnknownInHlr(3) - IMSI unknown in HLR (Home
… | column | Enumeration | .1.3.6.1.4.1.9.9.661.1.3.2.1.3 |
| c3gGsmCurrentService Current service type:
unknown(1) - service type is unknown
invalid(2) - no service
circuitSwitched(3) - circuit switched service
packetSwitched(4) - packet switch… | column | Enumeration | .1.3.6.1.4.1.9.9.661.1.3.2.1.4 |
| c3gGsmPacketService Packet Service type:
unknown(1) - service type is unknown.
none(2) - no service.
gprs(3) - General Packet Radio Service (GPRS).
edge(4) - Enhanced Data rates for … | column | Enumeration | .1.3.6.1.4.1.9.9.661.1.3.2.1.5 |
| c3gGsmCurrentRoamingStatus This object indicates whether the modem is in the home network
or is roaming. | column | Enumeration | .1.3.6.1.4.1.9.9.661.1.3.2.1.6 |
| c3gGsmNetworkSelectionMode Network selection mode. Can be manual selection mode or
automatic selection mode. Set to automatic by default. | column | Enumeration | .1.3.6.1.4.1.9.9.661.1.3.2.1.7 |
| c3gGsmCountry Country code. Country code string is given by the base
station. | column | OctetString | .1.3.6.1.4.1.9.9.661.1.3.2.1.8 |