vsiLogicalIfIndex
CISCO-VSIMASTER-MIB ·
.1.3.6.1.4.1.9.9.162.1.3.1.2
Object
column
VsiLogicalIfIndex
A unique value, greater than zero, for each VSI logical interface. Logical interface numbers are selected by the switch to be unique and persistent. The same number is preserved through power failures. This index is not the same as an ifIndex. It is an abstract number provided by the slave, representing a virtual interface, which is an identifier to be used when communicating with the slave about an interface.
Context
- MIB
- CISCO-VSIMASTER-MIB
- OID
.1.3.6.1.4.1.9.9.162.1.3.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vsiLogicalIfEntry
- Table
- vsiLogicalIfTable
- Siblings
- 27
Syntax
VsiLogicalIfIndex
- Source
- VsiLogicalIfIndex
- Base type
Integer32
Values & Constraints
Type Constraints
range: 1..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vsiLogicalIfControllerIndex The VSI controller index of the controller through which
this logical interface was learned. | column | VsiControllerIndex | .1.3.6.1.4.1.9.9.162.1.3.1.1 |
| vsiLogicalIfRxHeaderErrors The number of cells received via this logical
interface which had header errors, as reported to
the VSI master by the VSI slave. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.162.1.3.1.10 |
| vsiLogicalIfRxInvalidAddrs The number of cells received by this logical
interface which had invalid addresses, as
reported to the VSI master by the VSI slave.
An unknown vpi/vci value set is an example of
o… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.162.1.3.1.11 |
| vsiLogicalIfEndPointsInUse The number of end points in use on this logical
interface, as reported to the VSI master by the
VSI slave. This reflects an aggregate count of
input, output and bi-directional … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.162.1.3.1.12 |
| vsiLogicalIfAvailIngressChnls The number of ingress channels available for this
logical interface, as reported to the VSI master
by the VSI slave. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.162.1.3.1.13 |
| vsiLogicalIfAvailEgressChnls The number of egress channels available for this
logical interface, as reported to the VSI master
by the VSI slave. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.162.1.3.1.14 |
| vsiLogicalIfAvailIngressCellRate The available ingress cell rate in cells/second
for the logical interface, as reported to the VSI
master by the VSI slave. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.162.1.3.1.15 |
| vsiLogicalIfAvailEgressCellRate The available egress cell rate in cells/second
for the logical interface, as reported to the VSI
master by the VSI slave. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.162.1.3.1.16 |
| vsiLogicalIfVcMergeSupported If this object has the value true(1) then VC merge
capability is supported for this logical interface.
Otherwise VC merge capability is not supported on
this logical interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.162.1.3.1.17 |
| vsiLogicalIfMulticastSupported If this object has the value true(1) then multicast
capability is supported for this logical interface.
Otherwise multicast capability is not supported on
this logical interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.162.1.3.1.18 |
| vsiLogicalIfVpiTranslated If this object has the value true(1) then vpi values
entering on this logical interface are translated at
the other end of the link. This translation may be
an indication that th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.162.1.3.1.19 |
| vsiLogicalIfStrictSigRange If this object has the value true(1) then signalling
addresses must be in the strict advertised range for
the high-address (vpi). Otherwise, signalling addresses
are not so con… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.162.1.3.1.20 |
| vsiLogicalIfMaxIngressCellRate The maximum ingress cell rate in cells/second for the
logical interface, as reported to the VSI. This value is
the limiting value for vsiLogicalIfAvailIngressCellRate. | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.3.1.21 |
| vsiLogicalIfMaxEgressCellRate The maximum egress cell rate in cells/second
for the logical interface, as reported to the VSI
master by the VSI slave. | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.3.1.22 |
| vsiLogicalIfMinVpi Minimum allowed vpi value for this interface
as reported by VSI slave switch. | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.3.1.23 |
| vsiLogicalIfMaxVpi Maximum allowed vpi value for this interface
as reported by VSI slave switch. | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.3.1.24 |
| vsiLogicalIfMinVci Minimum allowed vci value for this interface
as reported by VSI slave switch. | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.3.1.25 |
| vsiLogicalIfMaxVci Maximum allowed vci value for this interface
as reported by VSI slave switch. | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.3.1.26 |
| vsiLogicalControlIfIndex The interface index for the interface which
controls this logical interface. This is the ifIndex
of the controlling network layer interface, and
is a direct manifestation of the… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.162.1.3.1.27 |
| vsiLogicalIfSessionIndex All logical interfaces are in the domain of a VSI slave,
which communicates with the VSI master through a Session.
This object is a selector for an entry in the table
vsiSessionTa… | column | VsiSessionIndex | .1.3.6.1.4.1.9.9.162.1.3.1.28 |
| vsiLogicalIfName The physical descriptor of the logical interface, as
reported by the VSI slave. It is distinct from ifName. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.162.1.3.1.3 |
| vsiLogicalIfOperState The VSI operational state of the logical interface as
reported to the VSI master by the VSI slave.
removed(1): the interface is not a valid interface on this
controlle… | column | Enumeration | .1.3.6.1.4.1.9.9.162.1.3.1.4 |
| vsiLogicalIfAdminState The current administrative (configured) state of the
interface, as reported to the VSI master by the VSI slave.
down(1): the interface is not a valid interface for the
controller… | column | Enumeration | .1.3.6.1.4.1.9.9.162.1.3.1.5 |
| vsiLogicalIfRxCells The number of cells received via this logical interface
as reported to the VSI master by the VSI slave. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.162.1.3.1.6 |
| vsiLogicalIfTxCells The number of cells transmitted via this logical
interface as reported to the VSI master by the VSI slave. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.162.1.3.1.7 |
| vsiLogicalIfRxCellsDiscarded The number of received cells discarded by this logical
interface as reported to the VSI master by the VSI slave. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.162.1.3.1.8 |
| vsiLogicalIfTxCellsDiscarded The number of transmitted cells discarded by this logical
interface as reported to the VSI master by the VSI slave. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.162.1.3.1.9 |