vsiControllerType
CISCO-VSIMASTER-MIB ·
.1.3.6.1.4.1.9.9.162.1.1.1.4
Object
column
Enumeration
A VSI controller represents an instance of a service layer
accessible to a network control application. This object
serves to identify the type of the network control
application currently being supported by this controller.
other(1): the type is unspecified.
mpls(2): indicates that the client is a Label Switch
Controller performing Multi Protocol Label Switching.
pnni(3): indicates that the client is an instance of the
ATM Private Network to Network Interface.
par(4): indicates that the client is an instance of ATM
Portable Autoroute.
Context
- MIB
- CISCO-VSIMASTER-MIB
- OID
.1.3.6.1.4.1.9.9.162.1.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vsiMasterControllerEntry
- Table
- vsiMasterControllerTable
- Siblings
- 13
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | mpls |
3 | pnni |
4 | par |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vsiControllerIndex A unique value per VSI controller, greater than 0. This
object gets its value from the vsiControllerId, and is used
for row selection within the vsiMasterControllerTable. | column | VsiControllerIndex | .1.3.6.1.4.1.9.9.162.1.1.1.1 |
| vsiLogicalControlInterface This object describes the instance of a logical interface index
bound to the slave end of the Slave Control Link, which is
referred to in the description of vsiControlInterface. | column | VsiLogicalIfIndex | .1.3.6.1.4.1.9.9.162.1.1.1.10 |
| vsiControlIfIpAddress The IP address of the interface identified by
the associated vsiControlInterface object. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.162.1.1.1.11 |
| vsiAvailableChnlWarnThreshold A controller has in its domain multiple instances of the
vsiLogicalIfAvailIngressChnls and
vsiLogicalIfAvailEgressChnls counters. This set of values,
associated with all the log… | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.1.1.12 |
| vsiAvailableChnlAlarmThreshold A controller has in its domain multiple instances of the
vsiLogicalIfAvailIngressChnls and
vsiLogicalIfAvailEgressChnls counters. This set of values,
associated with all the log… | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.1.1.13 |
| vsiAvailableChnlThresholdStatus As described for the vsiAvailableChnlWarnThreshold and
vsiAvailableChnlAlarmThreshold objects, events are generated
when these thresholds are crossed. This object defines a
set… | column | Enumeration | .1.3.6.1.4.1.9.9.162.1.1.1.14 |
| vsiControllerId The controller identifier for the VSI controller. Values are
arbitrarily assigned by the VSI protocol implementation being
managed via this MIB, with local significance only. … | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.1.1.2 |
| vsiCrossConnects This object contains a value equal to the number of
cross-connects being controlled via VSI protocol via
this controller. | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.1.1.3 |
| vsiBaseVersionSupported A VSI Master protocol instance defines internally a set of
versions of the protocol that it will support. These versions
are numbered, by default, starting from 1. This object
… | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.1.1.5 |
| vsiTopVersionSupported A VSI Master protocol instance defines internally a set of
versions of the protocol that it will support. These versions
are numbered, by default, starting from 1. This object
… | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.1.1.6 |
| vsiVersionInUse The number of the VSI version currently being used by this
controller. Protocol selection procedures dictate that this
should be the highest value of protocol version, between … | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.1.1.7 |
| vsiSpecifiedVersion When this object is written with a non-zero value,
re-synchronization procedures will be initiated, if necessary,
in order to constrain the master and slaves to use the
indicate… | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.1.1.8 |
| vsiControlInterface A VSI controller communicates with a set of VSI Slaves
across a control interface. The controller is connected to
the ATM switch via an ATM link called the Slave Control Link.
T… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.162.1.1.1.9 |