vsiAvailableChnlAlarmThreshold
CISCO-VSIMASTER-MIB ·
.1.3.6.1.4.1.9.9.162.1.1.1.13
Object
column
r/w
Integer32
A controller has in its domain multiple instances of the
vsiLogicalIfAvailIngressChnls and
vsiLogicalIfAvailEgressChnls counters. This set of values,
associated with all the logical interfaces in the
vsiLogicalIfTable, is monitored so as to note the minimum
value.
The minimum observed value is compared against this threshold
object. If the minimum observed value is less than this
threshold, and the value at the last comparison was greater
than or equal to this threshold, a single event will be
generated, to indicate an alarm that available channels are
being depleted. After an alarm event is generated, another
such event will not be generated unless the
vsiAvailableChnlWarnThreshold is reached.
If this object contains the value zero, then the thresholding
operation will be disabled. Otherwise, the value of this
object must be less than or equal to the value of the
associated vsiAvailableChnlWarnThreshold object.
Notification emissions are also gated by the
vsiXCTrapEnable object.
Context
- MIB
- CISCO-VSIMASTER-MIB
- OID
.1.3.6.1.4.1.9.9.162.1.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- vsiMasterControllerEntry
- Table
- vsiMasterControllerTable
- Siblings
- 13
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-100
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vsiControllerIndex A unique value per VSI controller, greater than 0. This
object gets its value from the vsiControllerId, and is used
for row selection within the vsiMasterControllerTable. | column | VsiControllerIndex | .1.3.6.1.4.1.9.9.162.1.1.1.1 |
| vsiLogicalControlInterface This object describes the instance of a logical interface index
bound to the slave end of the Slave Control Link, which is
referred to in the description of vsiControlInterface. | column | VsiLogicalIfIndex | .1.3.6.1.4.1.9.9.162.1.1.1.10 |
| vsiControlIfIpAddress The IP address of the interface identified by
the associated vsiControlInterface object. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.162.1.1.1.11 |
| vsiAvailableChnlWarnThreshold A controller has in its domain multiple instances of the
vsiLogicalIfAvailIngressChnls and
vsiLogicalIfAvailEgressChnls counters. This set of values,
associated with all the log… | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.1.1.12 |
| vsiAvailableChnlThresholdStatus As described for the vsiAvailableChnlWarnThreshold and
vsiAvailableChnlAlarmThreshold objects, events are generated
when these thresholds are crossed. This object defines a
set… | column | Enumeration | .1.3.6.1.4.1.9.9.162.1.1.1.14 |
| vsiControllerId The controller identifier for the VSI controller. Values are
arbitrarily assigned by the VSI protocol implementation being
managed via this MIB, with local significance only. … | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.1.1.2 |
| vsiCrossConnects This object contains a value equal to the number of
cross-connects being controlled via VSI protocol via
this controller. | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.1.1.3 |
| vsiControllerType A VSI controller represents an instance of a service layer
accessible to a network control application. This object
serves to identify the type of the network control
applicati… | column | Enumeration | .1.3.6.1.4.1.9.9.162.1.1.1.4 |
| vsiBaseVersionSupported A VSI Master protocol instance defines internally a set of
versions of the protocol that it will support. These versions
are numbered, by default, starting from 1. This object
… | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.1.1.5 |
| vsiTopVersionSupported A VSI Master protocol instance defines internally a set of
versions of the protocol that it will support. These versions
are numbered, by default, starting from 1. This object
… | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.1.1.6 |
| vsiVersionInUse The number of the VSI version currently being used by this
controller. Protocol selection procedures dictate that this
should be the highest value of protocol version, between … | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.1.1.7 |
| vsiSpecifiedVersion When this object is written with a non-zero value,
re-synchronization procedures will be initiated, if necessary,
in order to constrain the master and slaves to use the
indicate… | column | Integer32 | .1.3.6.1.4.1.9.9.162.1.1.1.8 |
| vsiControlInterface A VSI controller communicates with a set of VSI Slaves
across a control interface. The controller is connected to
the ATM switch via an ATM link called the Slave Control Link.
T… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.9.9.162.1.1.1.9 |