cvpdnTunnelAttrState

CISCO-VPDN-MGMT-MIB · .1.3.6.1.4.1.9.10.24.1.2.2.1.8

Object

column Enumeration

The current state of an active VPDN tunnel.
Tunnels of type l2f will have states with the 'l2f' prefix.
Tunnels of type l2tp will have states with the 'l2tp'
prefix.
Tunnels of type pptp will have states with the 'pptp'
prefix.
              
Each state code is explained below:
              
    unknown:            The current state of the tunnel is
                        unknown.
              
    l2fOpening:         The tunnel has just been initiated
                        and is pending for a remote end
                        reply to complete the process.
              
    l2fOpenWait:        This end received a tunnel open
                        request from the remote end and is
                        waiting for the tunnel to be
                        established.
              
    l2fOpen:            The tunnel is active.
              
    l2fClosing:         This end received a tunnel close
                        request.
              
    l2fCloseWait:       The tunnel has just been shut down
                        and is pending for the remote end
                        to reply to complete the process.
              
    l2tpIdle:           No tunnel is initiated yet.
              
    l2tpWaitCtlReply:   The tunnel has been initiated and
                        is pending for a remote end reply
                        to complete the process.
              
    l2tpEstablished:    The tunnel is active.
              
    l2tpShuttingDown:   The tunnel is in progress of
                        shutting down.
              
    l2tpNoSessionLeft:  There is no session left in the
                        tunnel.
              
    pptpIdle:           No tunnel is initiated yet.
              
    pptpWaitConnect:    The tunnel is waiting for a TCP
                        connection.
              
    pptpWaitCtlRequest: The tunnel has been initiated and
                        is pending for a remote end
                        request.
              
    pptpWaitCtlReply:   The tunnel has been initiated and
                        is pending for a remote end reply.
              
    pptpEstablished:    The tunnel is active.
              
    pptpWaitStopReply:  The tunnel is being shut down and
                        is pending for a remote end reply.
              
    pptpTerminal:       The tunnel has been shut down.

Context

MIB: CISCO-VPDN-MGMT-MIB
OID: .1.3.6.1.4.1.9.10.24.1.2.2.1.8
Type: column
Access: readonly
Status: current
Parent: cvpdnTunnelAttrEntry
Table: cvpdnTunnelAttrTable
Siblings: 20

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	unknown
`2`	l2fOpening
`3`	l2fOpenWait
`4`	l2fOpen
`5`	l2fClosing
`6`	l2fCloseWait
`7`	l2tpIdle
`8`	l2tpWaitCtlReply
`9`	l2tpEstablished
`10`	l2tpShuttingDown
`11`	l2tpNoSessionLeft
`12`	pptpIdle
`13`	pptpWaitConnect
`14`	pptpWaitCtlRequest
`15`	pptpWaitCtlReply
`16`	pptpEstablished
`17`	pptpWaitStopReply
`18`	pptpTerminal

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cvpdnTunnelAttrTunnelId The Tunnel ID of an active VPDN tunnel. If this end is the instigator of the tunnel, the ID is the TS tunnel ID, otherwise it is the NAS tunnel ID. Two distinct tu…	column	Integer32	`.1.3.6.1.4.1.9.10.24.1.2.2.1.1`
cvpdnTunnelAttrDeniedUsers A count of the accumulated total of denied users for the tunnel.	column	calls SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.24.1.2.2.1.10`
cvpdnTunnelAttrSoftshut A VPDN tunnel can be put into a soft shut state to prevent any new session to be added. This object specifies whether this tunnel has been soft shut. If its true, it has been so…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.24.1.2.2.1.11`
cvpdnTunnelAttrNetworkServiceType The type of network service used in the active tunnel.	column	Enumeration	`.1.3.6.1.4.1.9.10.24.1.2.2.1.12`
cvpdnTunnelAttrLocalIpAddress deprecated The local IP address of the tunnel. This IP address is that of the interface at the local end of the tunnel.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.9.10.24.1.2.2.1.13`
cvpdnTunnelAttrSourceIpAddress deprecated The source IP address of the tunnel. This IP address is the user configurable IP address for Stack Group Biding Protocol.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.9.10.24.1.2.2.1.14`
cvpdnTunnelAttrRemoteIpAddress deprecated The remote IP address of the tunnel. This IP address is that of the interface at the remote end of the tunnel.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.9.10.24.1.2.2.1.15`
cvpdnTunnelAttrLocalInetAddressType Indicates the type of address contained in cvpdnTunnelAttrLocalInetAddress	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.9.10.24.1.2.2.1.16`
cvpdnTunnelAttrLocalInetAddress The local IP address of the tunnel. This IP address is that of the interface at the local end of the tunnel. The type of this address is determined by the value of cvpdnTunnelAt…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.10.24.1.2.2.1.17`
cvpdnTunnelAttrSourceInetAddressType Indicates the type of address contained in cvpdnTunnelAttrSourceInetAddress	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.9.10.24.1.2.2.1.18`
cvpdnTunnelAttrSourceInetAddress The source IP address of the tunnel. This IP address is the user configurable IP address for Stack Group Biding Protocol. The type of this address is determined by the value of…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.10.24.1.2.2.1.19`
cvpdnTunnelAttrRemoteTunnelId The remote Tunnel ID of an active VPDN tunnel. If this end is the instigator of the tunnel, the ID is the NAS tunnel ID, otherwise it is the TS tunnel ID.	column	Integer32	`.1.3.6.1.4.1.9.10.24.1.2.2.1.2`
cvpdnTunnelAttrRemoteInetAddressType Indicates the type of address contained in cvpdnTunnelAttrRemoteInetAddress	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.9.10.24.1.2.2.1.20`
cvpdnTunnelAttrRemoteInetAddress The remote IP address of the tunnel. This IP address is that of the interface at the remote end of the tunnel. The type of this address is determined by the value of cvpdnTunnel…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.4.1.9.10.24.1.2.2.1.21`
cvpdnTunnelAttrLocalName The local name of an active VPDN tunnel. It will be the NAS name of the tunnel if the system serves as the NAS, or the TS name of the tunnel if the system serves as the tunnel se…	column	OctetString	`.1.3.6.1.4.1.9.10.24.1.2.2.1.3`
cvpdnTunnelAttrRemoteName The remote name of an active VPDN tunnel. It will be the tunnel server name of the tunnel if the system is a NAS, or the NAS name of the tunnel if the system serves as the tunnel…	column	OctetString	`.1.3.6.1.4.1.9.10.24.1.2.2.1.4`
cvpdnTunnelAttrRemoteEndpointName The remote end point name of an active VPDN tunnel. This name is either the domain name or the DNIS that this tunnel is projected with.	column	OctetString	`.1.3.6.1.4.1.9.10.24.1.2.2.1.5`
cvpdnTunnelAttrLocalInitConnection This object indicates whether the tunnel was originated locally or not. If it's true, the tunnel was originated locally.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.24.1.2.2.1.6`
cvpdnTunnelAttrOrigCause The cause which originated an active VPDN tunnel. The tunnel can be projected via domain name, DNIS, stack group, or L2 Xconnect.	column	Enumeration	`.1.3.6.1.4.1.9.10.24.1.2.2.1.7`
cvpdnTunnelAttrActiveSessions The total number of active session currently in the tunnel.	column	sessions SNMPv2-SMIGauge32	`.1.3.6.1.4.1.9.10.24.1.2.2.1.9`